TI中文支持网Part Number:TLV320ADC5140
Hello,when I encountered the following problems when using this chip:
Configuration conditions is：slave mode, MCLK 24.576M,BCK 3.072M,LRK 48K，Analog 4-channel input，I2S mode
question is I2S just have L channel,R is nothing,I have set R11->0x00,R12->0x01,R13->0x40,R14->0x41 and read R118 is 0XF0.
Could it be that it does not support outputting two channels on one data pin in I2S mode?
Please support,thanks
FRANK1：
感谢您对TI产品的关注！已经收到了您的案例，调查需要些时间，感谢您的耐心等待
,
Alice：
您好，
I2S协议包括左右通道，连接BCLK FSYNC SDOUT（数据手册“8.3.1.2.2 Inter IC Sound (I2S) Interface）。
芯片驱动TLV320ADCX140SW-DRIVERS 驱动程序或库 | 德州仪器 TI.com.cn，请使用PurePath Console 3 GUI辅助配置。
(+) [FAQ] [参考译文] [FAQ] Linux驱动程序：AIC31xx/DAC31xx/AIC325x/AIC320x/AIC326x/AIC321x的设备驱动程序 – 音频（参考译文帖）(Read Only) – 音频（参考译文帖） – E2E
设计支持
