Test 仿真器链接出现a dead JTAG clock，如何解决啊，急急急？？？？？？？？？？？？？？？？？？？？？？？？？？

[Start]

Execute the command:

%ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -F inform,logfile=yes -S pathlength -S integrity

[Result]

—–[Print the board config pathname(s)]————————————

C:\Users\WU\AppData\Local\.TI\213602635\     0\0\BrdDat\testBoard.dat

—–[Print the reset-command software log-file]—————————–

This utility has selected a 560/2xx-class product. This utility will load the program 'sd560v2u.out'. The library build date was 'May 30 2012'. The library build time was '23:17:26'. The library package version is '5.0.747.0'. The library component version is '35.34.40.0'. The controller does not use a programmable FPGA. The controller has a version number of '5' (0x00000005). The controller has an insertion length of '0' (0x00000000). The cable+pod has a version number of '8' (0x00000008). The cable+pod has a capability number of '7423' (0x00001cff). This utility will attempt to reset the controller.

A error occurred while attempting to reset the controller.

—–[An error has occurred and this utility has aborted]——————–

This error is generated by TI's USCIF driver or utilities.

The value is '-181' (0xffffff4b). The title is 'SC_ERR_CTL_NO_TRG_CLOCK'.

The explanation is: The controller has detected a dead JTAG clock. The user must turn-on or connect the JTAG clock for the target.

[End]

Shine：

请问你用的是哪款DSP芯片？

 

yang zhang7：

回复 Shine:

JTAG转接头弄错了。现在没问题了

jicun yang：

我也遇到了同样的问题，前辈有没有解决，解决方法能不能附上你的最后结果

Shine：

回复 jicun yang:

看看下面的wiki网站上引起dead jtag clock的一些原因。http://processors.wiki.ti.com/index.php/Debugging_JTAG_Connectivity_Problems#Dead_JTAG_clock

Tony Tang：

回复 yang zhang7:

yang zhang7JTAG转接头弄错了。现在没问题了

标题写成这个合适吗？Test 仿真器链接出现a dead JTAG clock，如何解决啊，急急急？？？？？？？？？？？？？？？？？？？？？？？？？？

cajviewer：

回复 jicun yang:

你的问题解决了吗？我也遇到类似问题，8148+560v2，是硬件坏了吗？

Haibing He：

回复 cajviewer:

你的问题解决了没？我遇到了跟你一样的问题