TI中文支持网Part Number:LAUNCHXL-F2800137
Error initializing emulator:
(Error -260 @ 0x0)
An attempt to connect to the XDS110 failed.
The cause may be one or more of: no XDS110 is connected, invalid
firmware update, invalid XDS110 serial number, or faulty USB
cable. The firmware and serial number may be updated using the
xdsdfu utility found in the …/ccs_base/common/uscif/xds110
directory of your installation. View the XDS110SupportReadMe.pdf
file there for instructions.
(Emulation package 9.11.0.00128)
请问该如何解决？
Vivian Gao：
原因就是截图里面的内容，里面提到的固件升级的方法见下方链接Updating the Firmware部分。
XDS110 Debug Probe
,
xiao xiao：
我的CCS安装在D盘，对此会有影响么
,
xiao xiao：
固件名称是firmware_3.0.0.25.bin是么？
,
xiao xiao：
按照这些步骤第一步输出：
USB Device Firmware Upgrade UtilityCopyright (c) 2008-2019 Texas Instruments Incorporated. All rights reserved.
Scanning USB buses for supported XDS110 devices…
<<<< Device 0 >>>>
VID: 0x0451 PID: 0xbef3Device Name: <<Unknown>>Manufacturer: <<Unknown>>Serial Num: <<Unknown>>Mode: RuntimeConfiguration: Standard
Found 1 device.
第二步输出：
USB Device Firmware Upgrade UtilityCopyright (c) 2008-2019 Texas Instruments Incorporated. All rights reserved.
Scanning USB buses for supported XDS110 devices…
<<<< Device 0 >>>>
VID: 0x0451 PID: 0xbef3Device Name: <<Unknown>>Manufacturer: <<Unknown>>Serial Num: <<Unknown>>Mode: RuntimeConfiguration: Standard
Switching device into DFU mode.
第三步输出：
USB Device Firmware Upgrade UtilityCopyright (c) 2008-2019 Texas Instruments Incorporated. All rights reserved.
Scanning USB buses for supported XDS110 devices…
Device is in runtime mode. Switch to DFU mode using '-m' beforeattempting any other operation
之后重新烧录问题还是没解决
,
Vivian Gao：
你的第三步输出提示你了，设备处于运行时模式。在之前使用“-m”切换到DFU模式尝试任何其他操作。
你的第三步没有进入DFU模式
