TI中文支持网如题，下载hex文件出现如下报错：
ERROR – OTP Progamming was NOT successful. Please check the 'Error' Tab for more information
ERROR – Register 026A, was programmed to: 22, but read back: 00
ERROR – Register 0269, was programmed to: EF, but read back: 00
ERROR – Register 0268, was programmed to: 80, but read back: 00
ERROR – Register 0267, was programmed to: A3, but read back: 00
ERROR – Register 0266, was programmed to: 0D, but read back: 00
ERROR – Register 0265, was programmed to: F5, but read back: 00
ERROR – Register 0264, was programmed to: 0D, but read back: 00
ERROR – Register 0263, was programmed to: 25, but read back: 00
ERROR – Register 0262, was programmed to: 93, but read back: 00
。。。
小白求解释，多谢了。
song zhao：
要怎么设置才可以，多谢。。。
Robin Feng：
回复 song zhao:
是不是没连上或者电没有供上,读回来全是0
song zhao：
回复 Robin Feng:
供电正常，四个LED全亮。
Iven Xu：
你的测试环境是什么样子的？你提供的信息太少，从你的提示来看，是EEPROM通信问题。
song zhao：
回复 Iven Xu:
这个是硬件连接，如图。
song zhao：
回复 Iven Xu:
这个是上位机软件，初始设置，没有配置。求解。
song zhao：
回复 Kailyn Chen:
+5V稳压芯片貌似被烧掉了，整板供电已经成了+7.5V。。。
Iven Xu：
回复 song zhao:
Hi Song Zhao,
请问，您现在PGA400的评估，进展如何了？
Hawk Tong：
回复 Iven Xu:
请检查整板供电是否正确？另外所选用PGA400GUI的版本号。
还有问题，请联系我处
