TI中文支持网
TI专业的中文技术问题咨询交流网站

TMS28027仿真问题

所用器件为TMS28027F    仿真器XDS100V3

问题描述:仿真器可以连接上,但是下载程序时提示如下信息

C28xx: Flash Programmer: Warning: The configured device (TMS320F28027), does not match the detected device (). Flash Programming operations could be affected. Please consider modifying your target configuration file.
C28xx: GEL Output:Device Calibration not complete, check if device is unlocked and recalibrate.C28xx: Flash Programmer: Device is locked or not connected. Operation cancelled.
C28xx: GEL: File: G:\ti\motorware_1_01_00_16 – 3b\sw\solutions\instaspin_foc\boards\boostxldrv8301_revB\f28x\f2802xF\projects\ccs5\proj_lab03b\Flash\proj_lab03b.out: Load failed.

请问这是什么原因

Seven Han:

对第一个warning,请问您仿真器target configerion配置正确吗?第二个,芯片或许被锁住,这颗片子是否有用XDS100V3成功下载过?

所用器件为TMS28027F    仿真器XDS100V3

问题描述:仿真器可以连接上,但是下载程序时提示如下信息

C28xx: Flash Programmer: Warning: The configured device (TMS320F28027), does not match the detected device (). Flash Programming operations could be affected. Please consider modifying your target configuration file.
C28xx: GEL Output:Device Calibration not complete, check if device is unlocked and recalibrate.C28xx: Flash Programmer: Device is locked or not connected. Operation cancelled.
C28xx: GEL: File: G:\ti\motorware_1_01_00_16 – 3b\sw\solutions\instaspin_foc\boards\boostxldrv8301_revB\f28x\f2802xF\projects\ccs5\proj_lab03b\Flash\proj_lab03b.out: Load failed.

请问这是什么原因

rookiecalf:

回复 Seven Han:

TMS28027F是带fast库的,和TMS28027的存储区好像有些区别,你还是配置成实际使用的TMS28027F试试吧

所用器件为TMS28027F    仿真器XDS100V3

问题描述:仿真器可以连接上,但是下载程序时提示如下信息

C28xx: Flash Programmer: Warning: The configured device (TMS320F28027), does not match the detected device (). Flash Programming operations could be affected. Please consider modifying your target configuration file.
C28xx: GEL Output:Device Calibration not complete, check if device is unlocked and recalibrate.C28xx: Flash Programmer: Device is locked or not connected. Operation cancelled.
C28xx: GEL: File: G:\ti\motorware_1_01_00_16 – 3b\sw\solutions\instaspin_foc\boards\boostxldrv8301_revB\f28x\f2802xF\projects\ccs5\proj_lab03b\Flash\proj_lab03b.out: Load failed.

请问这是什么原因

wujie xi:

回复 Seven Han:

1. 配置正确

2. 板子焊好后一次也没有下载过;

所用器件为TMS28027F    仿真器XDS100V3

问题描述:仿真器可以连接上,但是下载程序时提示如下信息

C28xx: Flash Programmer: Warning: The configured device (TMS320F28027), does not match the detected device (). Flash Programming operations could be affected. Please consider modifying your target configuration file.
C28xx: GEL Output:Device Calibration not complete, check if device is unlocked and recalibrate.C28xx: Flash Programmer: Device is locked or not connected. Operation cancelled.
C28xx: GEL: File: G:\ti\motorware_1_01_00_16 – 3b\sw\solutions\instaspin_foc\boards\boostxldrv8301_revB\f28x\f2802xF\projects\ccs5\proj_lab03b\Flash\proj_lab03b.out: Load failed.

请问这是什么原因

wujie xi:

回复 rookiecalf:

配置是正确的;

谢谢!

所用器件为TMS28027F    仿真器XDS100V3

问题描述:仿真器可以连接上,但是下载程序时提示如下信息

C28xx: Flash Programmer: Warning: The configured device (TMS320F28027), does not match the detected device (). Flash Programming operations could be affected. Please consider modifying your target configuration file.
C28xx: GEL Output:Device Calibration not complete, check if device is unlocked and recalibrate.C28xx: Flash Programmer: Device is locked or not connected. Operation cancelled.
C28xx: GEL: File: G:\ti\motorware_1_01_00_16 – 3b\sw\solutions\instaspin_foc\boards\boostxldrv8301_revB\f28x\f2802xF\projects\ccs5\proj_lab03b\Flash\proj_lab03b.out: Load failed.

请问这是什么原因

rookiecalf:

回复 wujie xi:

自己焊接的板子?找找看有无虚焊,特别是电源和jtag口位置。

所用器件为TMS28027F    仿真器XDS100V3

问题描述:仿真器可以连接上,但是下载程序时提示如下信息

C28xx: Flash Programmer: Warning: The configured device (TMS320F28027), does not match the detected device (). Flash Programming operations could be affected. Please consider modifying your target configuration file.
C28xx: GEL Output:Device Calibration not complete, check if device is unlocked and recalibrate.C28xx: Flash Programmer: Device is locked or not connected. Operation cancelled.
C28xx: GEL: File: G:\ti\motorware_1_01_00_16 – 3b\sw\solutions\instaspin_foc\boards\boostxldrv8301_revB\f28x\f2802xF\projects\ccs5\proj_lab03b\Flash\proj_lab03b.out: Load failed.

请问这是什么原因

Seven Han:

回复 wujie xi:

您更换个仿真器,用XDS100V2试试,XDS100V3是会有些支持上的问题。

所用器件为TMS28027F    仿真器XDS100V3

问题描述:仿真器可以连接上,但是下载程序时提示如下信息

C28xx: Flash Programmer: Warning: The configured device (TMS320F28027), does not match the detected device (). Flash Programming operations could be affected. Please consider modifying your target configuration file.
C28xx: GEL Output:Device Calibration not complete, check if device is unlocked and recalibrate.C28xx: Flash Programmer: Device is locked or not connected. Operation cancelled.
C28xx: GEL: File: G:\ti\motorware_1_01_00_16 – 3b\sw\solutions\instaspin_foc\boards\boostxldrv8301_revB\f28x\f2802xF\projects\ccs5\proj_lab03b\Flash\proj_lab03b.out: Load failed.

请问这是什么原因

rookiecalf:

回复 rookiecalf:

还是先选对应的芯片再试一下吧

赞(0)
未经允许不得转载:TI中文支持网 » TMS28027仿真问题
分享到: 更多 (0)