TI中文支持网在进行联机调试时，经常出现debug失败，无法仿真，有如下错误：
C28xx: Trouble Reading Register PC: (Error -1041 @ 0x0) The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.507.0) C28xx: Failed CPU Reset: (Error -1041 @ 0x0) The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.507.0) C28xx: File Loader: Data verification failed at address 0x00000050 Please verify target memory and memory map. C28xx: GEL: File: E:\Work\Program\S02\s02\Debug\S02_Prj.out: a data verification error occurred, file load failed. C28xx: Error: (Error -150 @ 0x0) One of the FTDI driver functions used during configuration returned a invalid status or an error. (Emulation package 5.1.507.0) C28xx: Unable to determine target status after 20 attempts C28xx: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging
此外，在运行过程中，有时无法打断点，是灰色的。麻烦各位能帮忙解决下。谢谢
quanfa he：
C28xx: Failed CPU Reset: (Error -1041 @ 0x0) The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.507.0) C28xx: Can't Run Target CPU: (Error -1140 @ 0x3F5F06) Lost debug connection to device. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 5.1.507.0)
在进行联机调试时，经常出现debug失败，无法仿真，有如下错误：
C28xx: Trouble Reading Register PC: (Error -1041 @ 0x0) The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.507.0) C28xx: Failed CPU Reset: (Error -1041 @ 0x0) The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.507.0) C28xx: File Loader: Data verification failed at address 0x00000050 Please verify target memory and memory map. C28xx: GEL: File: E:\Work\Program\S02\s02\Debug\S02_Prj.out: a data verification error occurred, file load failed. C28xx: Error: (Error -150 @ 0x0) One of the FTDI driver functions used during configuration returned a invalid status or an error. (Emulation package 5.1.507.0) C28xx: Unable to determine target status after 20 attempts C28xx: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging
此外，在运行过程中，有时无法打断点，是灰色的。麻烦各位能帮忙解决下。谢谢
Seven Han：
建议测试各供电电源是否稳定；
仿真时断点使用注意项看此贴：http://www.deyisupport.com/question_answer/microcontrollers/c2000/f/56/p/140126/394420.aspx#394420
在进行联机调试时，经常出现debug失败，无法仿真，有如下错误：
C28xx: Trouble Reading Register PC: (Error -1041 @ 0x0) The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.507.0) C28xx: Failed CPU Reset: (Error -1041 @ 0x0) The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.507.0) C28xx: File Loader: Data verification failed at address 0x00000050 Please verify target memory and memory map. C28xx: GEL: File: E:\Work\Program\S02\s02\Debug\S02_Prj.out: a data verification error occurred, file load failed. C28xx: Error: (Error -150 @ 0x0) One of the FTDI driver functions used during configuration returned a invalid status or an error. (Emulation package 5.1.507.0) C28xx: Unable to determine target status after 20 attempts C28xx: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging
此外，在运行过程中，有时无法打断点，是灰色的。麻烦各位能帮忙解决下。谢谢
lei wang33：
以前遇到无法下载调试类似的大多是电源不稳定，中途断开的话大多是存在强的干扰源
在进行联机调试时，经常出现debug失败，无法仿真，有如下错误：
C28xx: Trouble Reading Register PC: (Error -1041 @ 0x0) The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.507.0) C28xx: Failed CPU Reset: (Error -1041 @ 0x0) The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.507.0) C28xx: File Loader: Data verification failed at address 0x00000050 Please verify target memory and memory map. C28xx: GEL: File: E:\Work\Program\S02\s02\Debug\S02_Prj.out: a data verification error occurred, file load failed. C28xx: Error: (Error -150 @ 0x0) One of the FTDI driver functions used during configuration returned a invalid status or an error. (Emulation package 5.1.507.0) C28xx: Unable to determine target status after 20 attempts C28xx: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging
此外，在运行过程中，有时无法打断点，是灰色的。麻烦各位能帮忙解决下。谢谢
wujie xi：
回复 quanfa he:
有示波器测量3.3V,是否稳定，若有5V,15V则测量相应输出有没有问题；不要用万用表；
