TI中文支持网**** Build of configuration Debug for project PMSM_Inverter ****
"C:\\ti\\ccsv6\\utils\\bin\\gmake" -k all
**** Build Finished ****
建议便签下是一下内容
Description Resource Path Location
Current optimization/debug settings: –opt_level=off –opt_for_speed=2 -g PMSM_Inverter properties
<a href="file:/c:/ti/ccsv6/tools/compiler/dmed/HTML/27007.html">#27007-D</a> Detecting compilation without optimization. Recommend setting –opt_level=3. NOTE: debug ability will decrease. PMSM_Inverter properties
这是什么问题才会出现这样的错误，， 谢谢
喝可乐的马甲：
Clean一下工程，再Rebuild一下试试。
**** Build of configuration Debug for project PMSM_Inverter ****
"C:\\ti\\ccsv6\\utils\\bin\\gmake" -k all
**** Build Finished ****
建议便签下是一下内容
Description Resource Path Location
Current optimization/debug settings: –opt_level=off –opt_for_speed=2 -g PMSM_Inverter properties
<a href="file:/c:/ti/ccsv6/tools/compiler/dmed/HTML/27007.html">#27007-D</a> Detecting compilation without optimization. Recommend setting –opt_level=3. NOTE: debug ability will decrease. PMSM_Inverter properties
这是什么问题才会出现这样的错误，， 谢谢
Seven Han：
请参考帖子：http://www.deyisupport.com/question_answer/microcontrollers/c2000/f/56/p/73211/177905.aspx
具体问题在：http://processors.wiki.ti.com/index.php/Compiler/diagnostic_messages/27007
**** Build of configuration Debug for project PMSM_Inverter ****
"C:\\ti\\ccsv6\\utils\\bin\\gmake" -k all
**** Build Finished ****
建议便签下是一下内容
Description Resource Path Location
Current optimization/debug settings: –opt_level=off –opt_for_speed=2 -g PMSM_Inverter properties
<a href="file:/c:/ti/ccsv6/tools/compiler/dmed/HTML/27007.html">#27007-D</a> Detecting compilation without optimization. Recommend setting –opt_level=3. NOTE: debug ability will decrease. PMSM_Inverter properties
这是什么问题才会出现这样的错误，， 谢谢
mangui zhang：你好clean一下能解决问题吗？
**** Build of configuration Debug for project PMSM_Inverter ****
"C:\\ti\\ccsv6\\utils\\bin\\gmake" -k all
**** Build Finished ****
建议便签下是一下内容
Description Resource Path Location
Current optimization/debug settings: –opt_level=off –opt_for_speed=2 -g PMSM_Inverter properties
<a href="file:/c:/ti/ccsv6/tools/compiler/dmed/HTML/27007.html">#27007-D</a> Detecting compilation without optimization. Recommend setting –opt_level=3. NOTE: debug ability will decrease. PMSM_Inverter properties
这是什么问题才会出现这样的错误，， 谢谢
zhaogong zhao：
回复 喝可乐的马甲:
Clean一下工程，再Rebuild也不行
**** Build of configuration Debug for project PMSM_Inverter ****
"C:\\ti\\ccsv6\\utils\\bin\\gmake" -k all
**** Build Finished ****
建议便签下是一下内容
Description Resource Path Location
Current optimization/debug settings: –opt_level=off –opt_for_speed=2 -g PMSM_Inverter properties
<a href="file:/c:/ti/ccsv6/tools/compiler/dmed/HTML/27007.html">#27007-D</a> Detecting compilation without optimization. Recommend setting –opt_level=3. NOTE: debug ability will decrease. PMSM_Inverter properties
这是什么问题才会出现这样的错误，， 谢谢
Young Hu：
回复 zhaogong zhao:
需要您提供下详细的工程配置信息以及CCS安装组件信息
**** Build of configuration Debug for project PMSM_Inverter ****
"C:\\ti\\ccsv6\\utils\\bin\\gmake" -k all
**** Build Finished ****
建议便签下是一下内容
Description Resource Path Location
Current optimization/debug settings: –opt_level=off –opt_for_speed=2 -g PMSM_Inverter properties
<a href="file:/c:/ti/ccsv6/tools/compiler/dmed/HTML/27007.html">#27007-D</a> Detecting compilation without optimization. Recommend setting –opt_level=3. NOTE: debug ability will decrease. PMSM_Inverter properties
这是什么问题才会出现这样的错误，， 谢谢
zhaogong zhao：
回复 Young Hu:
工程配置信息以及CCS安装组件信息是在什么地方能查看
**** Build of configuration Debug for project PMSM_Inverter ****
"C:\\ti\\ccsv6\\utils\\bin\\gmake" -k all
**** Build Finished ****
建议便签下是一下内容
Description Resource Path Location
Current optimization/debug settings: –opt_level=off –opt_for_speed=2 -g PMSM_Inverter properties
<a href="file:/c:/ti/ccsv6/tools/compiler/dmed/HTML/27007.html">#27007-D</a> Detecting compilation without optimization. Recommend setting –opt_level=3. NOTE: debug ability will decrease. PMSM_Inverter properties
这是什么问题才会出现这样的错误，， 谢谢
zhaogong zhao：
回复 zhaogong zhao:
**** Build of configuration Debug for project PMSM_Inverter ****
"C:\\ti\\ccsv6\\utils\\bin\\gmake" -k all
**** Build Finished ****
建议便签下是一下内容
Description Resource Path Location
Current optimization/debug settings: –opt_level=off –opt_for_speed=2 -g PMSM_Inverter properties
<a href="file:/c:/ti/ccsv6/tools/compiler/dmed/HTML/27007.html">#27007-D</a> Detecting compilation without optimization. Recommend setting –opt_level=3. NOTE: debug ability will decrease. PMSM_Inverter properties
这是什么问题才会出现这样的错误，， 谢谢
zhaogong zhao：
回复 zhaogong zhao:
**** Build of configuration Debug for project PMSM_Inverter ****
"C:\\ti\\ccsv6\\utils\\bin\\gmake" -k all
**** Build Finished ****
建议便签下是一下内容
Description Resource Path Location
Current optimization/debug settings: –opt_level=off –opt_for_speed=2 -g PMSM_Inverter properties
<a href="file:/c:/ti/ccsv6/tools/compiler/dmed/HTML/27007.html">#27007-D</a> Detecting compilation without optimization. Recommend setting –opt_level=3. NOTE: debug ability will decrease. PMSM_Inverter properties
这是什么问题才会出现这样的错误，， 谢谢
zhaogong zhao：
回复 zhaogong zhao:
**** Build of configuration Debug for project PMSM_Inverter ****
"C:\\ti\\ccsv6\\utils\\bin\\gmake" -k all
**** Build Finished ****
建议便签下是一下内容
Description Resource Path Location
Current optimization/debug settings: –opt_level=off –opt_for_speed=2 -g PMSM_Inverter properties
<a href="file:/c:/ti/ccsv6/tools/compiler/dmed/HTML/27007.html">#27007-D</a> Detecting compilation without optimization. Recommend setting –opt_level=3. NOTE: debug ability will decrease. PMSM_Inverter properties
这是什么问题才会出现这样的错误，， 谢谢
zhaogong zhao：
回复 Young Hu:
jufang1.rar我把我的工程也贴上来，帮忙给看看，谢谢
