TI中文支持网导入工程到CCS时,
若选取“Import Legacy CCSv3.3 Project”，则在最后一步即将结束导入时，弹窗：
The directory 'XXX' already contains Eclipse metadata! If the legacy project has already been migrated, import it as a regular CCS project. Otherwise, delete all Eclipse project metadata before migrating.
若选取"Import Existing CCS/CCE Eclipse Project"，同样也是在最后一步即将结束导入时，弹窗：
The Managed Make project file could not be read because of the following error:
The Managed Make project file for project SRC_ROOT is missing.
Managed Make functionally will not be available for this project.
请指点一下。我用的是CCS V4.2.0版本，用V4.1.2也试过，同样的弹窗错误提示。请教大家，是版本的问题么？有些地方组要注意的么？谢谢！
mangui zhang：
使用CCSV4的比较少 建议使用V5或V6版本
import不成功 建议你基于v4建立工程 将源文件添加进来试试
导入工程到CCS时,
若选取“Import Legacy CCSv3.3 Project”，则在最后一步即将结束导入时，弹窗：
The directory 'XXX' already contains Eclipse metadata! If the legacy project has already been migrated, import it as a regular CCS project. Otherwise, delete all Eclipse project metadata before migrating.
若选取"Import Existing CCS/CCE Eclipse Project"，同样也是在最后一步即将结束导入时，弹窗：
The Managed Make project file could not be read because of the following error:
The Managed Make project file for project SRC_ROOT is missing.
Managed Make functionally will not be available for this project.
请指点一下。我用的是CCS V4.2.0版本，用V4.1.2也试过，同样的弹窗错误提示。请教大家，是版本的问题么？有些地方组要注意的么？谢谢！
Ze Ni：
回复 mangui zhang:
我刚刚按照您的方法，基于V4新建了一个project，然后在右键选择“Add files to project”，发现只能一个文件进行添加，不能整个文件夹进行添加。有办法解决这个问题么？
另外，如果用V5，V6的版本，就可以解决掉导入弹窗的问题了么？
公司用的是合众达SEED 510plus 驱动器，我查询的结论是：V5.3——V6版本不能兼容这款驱动器。不知其他V5版本的能否兼容呢？谢谢！
导入工程到CCS时,
若选取“Import Legacy CCSv3.3 Project”，则在最后一步即将结束导入时，弹窗：
The directory 'XXX' already contains Eclipse metadata! If the legacy project has already been migrated, import it as a regular CCS project. Otherwise, delete all Eclipse project metadata before migrating.
若选取"Import Existing CCS/CCE Eclipse Project"，同样也是在最后一步即将结束导入时，弹窗：
The Managed Make project file could not be read because of the following error:
The Managed Make project file for project SRC_ROOT is missing.
Managed Make functionally will not be available for this project.
请指点一下。我用的是CCS V4.2.0版本，用V4.1.2也试过，同样的弹窗错误提示。请教大家，是版本的问题么？有些地方组要注意的么？谢谢！
Ze Ni：
回复 mangui zhang:
重新安装了CCS，这次是V5.1版本，若选取“Import Legacy CCS V3.3 project”，那么，还是会弹出之前一样的窗口错误提示；若选取“Import Existing CCS/CCE Eclipse Project”，那么会弹出：
Issues that may require your attantion were encountered while importing the project(s).
Reason:
See datails below:
Error: Import failed for project "XXX" because its complier definition is not available. Please install the C2000v6.1 compiler before importing this project.
看了这个错误弹窗后，我以为可能是安装过程中没有安装C2000v6的编译文件，所以我就在网上搜C2000v6.1的编译器下载链接，然后，安装了这个编译文件。
接着再打开CCS V5，还是同样的问题。
接着我开始怀疑是不是C2000v6.1的路径应该放在CCS V5的ccsbase下的C2000文件夹里。于是我照着这样尝试了一遍，还是报一样的错误弹窗。
请您指点一下，怎样才能避免这种错误弹窗呢？谢谢了！！
导入工程到CCS时,
若选取“Import Legacy CCSv3.3 Project”，则在最后一步即将结束导入时，弹窗：
The directory 'XXX' already contains Eclipse metadata! If the legacy project has already been migrated, import it as a regular CCS project. Otherwise, delete all Eclipse project metadata before migrating.
若选取"Import Existing CCS/CCE Eclipse Project"，同样也是在最后一步即将结束导入时，弹窗：
The Managed Make project file could not be read because of the following error:
The Managed Make project file for project SRC_ROOT is missing.
Managed Make functionally will not be available for this project.
请指点一下。我用的是CCS V4.2.0版本，用V4.1.2也试过，同样的弹窗错误提示。请教大家，是版本的问题么？有些地方组要注意的么？谢谢！
rookiecalf：
回复 Ze Ni:
你新建工程看看里面是否可以选择到你安装版本的编译器，如果不能，有可能ccs并没有识别
导入工程到CCS时,
若选取“Import Legacy CCSv3.3 Project”，则在最后一步即将结束导入时，弹窗：
The directory 'XXX' already contains Eclipse metadata! If the legacy project has already been migrated, import it as a regular CCS project. Otherwise, delete all Eclipse project metadata before migrating.
若选取"Import Existing CCS/CCE Eclipse Project"，同样也是在最后一步即将结束导入时，弹窗：
The Managed Make project file could not be read because of the following error:
The Managed Make project file for project SRC_ROOT is missing.
Managed Make functionally will not be available for this project.
请指点一下。我用的是CCS V4.2.0版本，用V4.1.2也试过，同样的弹窗错误提示。请教大家，是版本的问题么？有些地方组要注意的么？谢谢！
Ze Ni：
回复 rookiecalf:
changjiang liu
你新建工程看看里面是否可以选择到你安装版本的编译器，如果不能，有可能ccs并没有识别
导入工程到CCS时,
若选取“Import Legacy CCSv3.3 Project”，则在最后一步即将结束导入时，弹窗：
The directory 'XXX' already contains Eclipse metadata! If the legacy project has already been migrated, import it as a regular CCS project. Otherwise, delete all Eclipse project metadata before migrating.
若选取"Import Existing CCS/CCE Eclipse Project"，同样也是在最后一步即将结束导入时，弹窗：
The Managed Make project file could not be read because of the following error:
The Managed Make project file for project SRC_ROOT is missing.
Managed Make functionally will not be available for this project.
请指点一下。我用的是CCS V4.2.0版本，用V4.1.2也试过，同样的弹窗错误提示。请教大家，是版本的问题么？有些地方组要注意的么？谢谢！
囧：
回复 Ze Ni:
建议你下载CCS5.5以上版本，编译器可以在以下链接下载安装http://software-dl.ti.com/codegen/non-esd/downloads/download.htm#C2000
导入工程到CCS时,
若选取“Import Legacy CCSv3.3 Project”，则在最后一步即将结束导入时，弹窗：
The directory 'XXX' already contains Eclipse metadata! If the legacy project has already been migrated, import it as a regular CCS project. Otherwise, delete all Eclipse project metadata before migrating.
若选取"Import Existing CCS/CCE Eclipse Project"，同样也是在最后一步即将结束导入时，弹窗：
The Managed Make project file could not be read because of the following error:
The Managed Make project file for project SRC_ROOT is missing.
Managed Make functionally will not be available for this project.
请指点一下。我用的是CCS V4.2.0版本，用V4.1.2也试过，同样的弹窗错误提示。请教大家，是版本的问题么？有些地方组要注意的么？谢谢！
Ze Ni：
回复 囧:
问题解决了！
有两点可以供后面遇到跟我类似的问题的伙伴们参考：
1、导入路径不能是桌面，一定要是全英文名路径
2、勾选“copy projects into workspace”。如下图所示：
因为我要打开的这个工程是在3.3版本的基础上建立的，而我用的CCS版本是V4.2的，所以通过勾选这个选项，相当于是把原版本的工程转换成V4.2版本兼容的工程。
可以通过观察workspace文件夹知道：如果不勾选，那么在workspace中不会自动创建一个对应的工程文件夹；如果勾选，那么在workspace中会自动生成一个对应的工程文件夹。
导入工程到CCS时,
若选取“Import Legacy CCSv3.3 Project”，则在最后一步即将结束导入时，弹窗：
The directory 'XXX' already contains Eclipse metadata! If the legacy project has already been migrated, import it as a regular CCS project. Otherwise, delete all Eclipse project metadata before migrating.
若选取"Import Existing CCS/CCE Eclipse Project"，同样也是在最后一步即将结束导入时，弹窗：
The Managed Make project file could not be read because of the following error:
The Managed Make project file for project SRC_ROOT is missing.
Managed Make functionally will not be available for this project.
请指点一下。我用的是CCS V4.2.0版本，用V4.1.2也试过，同样的弹窗错误提示。请教大家，是版本的问题么？有些地方组要注意的么？谢谢！
Karos Chan：
回复 Ze Ni:
就是这个！感谢！
导入工程到CCS时,
若选取“Import Legacy CCSv3.3 Project”，则在最后一步即将结束导入时，弹窗：
The directory 'XXX' already contains Eclipse metadata! If the legacy project has already been migrated, import it as a regular CCS project. Otherwise, delete all Eclipse project metadata before migrating.
若选取"Import Existing CCS/CCE Eclipse Project"，同样也是在最后一步即将结束导入时，弹窗：
The Managed Make project file could not be read because of the following error:
The Managed Make project file for project SRC_ROOT is missing.
Managed Make functionally will not be available for this project.
请指点一下。我用的是CCS V4.2.0版本，用V4.1.2也试过，同样的弹窗错误提示。请教大家，是版本的问题么？有些地方组要注意的么？谢谢！
singers xu：
回复 Ze Ni:
我的也出现这种弹框，照楼上做法行不行。。。左后我勾选keep original location。。。。反而可以。。可以我work space之前并没有添加过这个工程（查看过work space文件夹确认过）。。。。。希望给后面的人一点参考
导入工程到CCS时,
若选取“Import Legacy CCSv3.3 Project”，则在最后一步即将结束导入时，弹窗：
The directory 'XXX' already contains Eclipse metadata! If the legacy project has already been migrated, import it as a regular CCS project. Otherwise, delete all Eclipse project metadata before migrating.
若选取"Import Existing CCS/CCE Eclipse Project"，同样也是在最后一步即将结束导入时，弹窗：
The Managed Make project file could not be read because of the following error:
The Managed Make project file for project SRC_ROOT is missing.
Managed Make functionally will not be available for this project.
请指点一下。我用的是CCS V4.2.0版本，用V4.1.2也试过，同样的弹窗错误提示。请教大家，是版本的问题么？有些地方组要注意的么？谢谢！
user5300797：
回复 singers xu:
我的也是这种情况。另外导入到ccs6.0以后会自动生成一个文件夹，下次再导入时就失败了，要删除那个新生成的文件夹
