TI中文支持网Memory Map Initialization Complete
C28xx_CPU1: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map.
C28xx_CPU1: File Loader: Verification failed: Values at address 0x82001@Program do not match Please verify target memory and memory map.
C28xx_CPU1: GEL: File: D:\OneDrive\PACK19030\CPU1_19030.out: a data verification error occurred, file load failed.
user3786970：
28377D 的控制板，板子是完好的，在别的电脑上都能烧写，之前在公司专门用来烧写的电脑上也一直是正常的，最近发现这台电脑烧不了程序，总是报错，报错内容如上，仿真器是XDS100V3，仿真器设置是正确的，所有的板子在这个电脑上都报错，但是在别的电脑上都是ok的，ccs软件重启，重装，都不能解决。
在这个电脑上dsp能够connect，就是不能烧写。请教一下，是怎么回事，实在是搞不定了。
Memory Map Initialization Complete
C28xx_CPU1: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map.
C28xx_CPU1: File Loader: Verification failed: Values at address 0x82001@Program do not match Please verify target memory and memory map.
C28xx_CPU1: GEL: File: D:\OneDrive\PACK19030\CPU1_19030.out: a data verification error occurred, file load failed.
Green Deng：是只有这一个工程有这个问题还是其他程序也会出现这种情况？更新CCS版本有试过吗？
Memory Map Initialization Complete
C28xx_CPU1: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map.
C28xx_CPU1: File Loader: Verification failed: Values at address 0x82001@Program do not match Please verify target memory and memory map.
C28xx_CPU1: GEL: File: D:\OneDrive\PACK19030\CPU1_19030.out: a data verification error occurred, file load failed.
mangui zhang：
回复 user3786970:
你把能烧写的整个工程拷贝到这个机子上然后工程属性等配置完全一致 然后再烧写看看
或者编译完成后再烧写看看
Memory Map Initialization Complete
C28xx_CPU1: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map.
C28xx_CPU1: File Loader: Verification failed: Values at address 0x82001@Program do not match Please verify target memory and memory map.
C28xx_CPU1: GEL: File: D:\OneDrive\PACK19030\CPU1_19030.out: a data verification error occurred, file load failed.
user3786970：
回复 mangui zhang:
感谢帮助，问题解决了，这个电脑重装ccs7.4还是不行 ，安装ccs8.3版本的就好了，非常感谢。
Memory Map Initialization Complete
C28xx_CPU1: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map.
C28xx_CPU1: File Loader: Verification failed: Values at address 0x82001@Program do not match Please verify target memory and memory map.
C28xx_CPU1: GEL: File: D:\OneDrive\PACK19030\CPU1_19030.out: a data verification error occurred, file load failed.
Green Deng：
回复 user3786970:
好的，感谢反馈
Memory Map Initialization Complete
C28xx_CPU1: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map.
C28xx_CPU1: File Loader: Verification failed: Values at address 0x82001@Program do not match Please verify target memory and memory map.
C28xx_CPU1: GEL: File: D:\OneDrive\PACK19030\CPU1_19030.out: a data verification error occurred, file load failed.
dirtwillfly：
回复 user3786970:
这种情况，要看使用的仿真器、仿真器的驱动安装情况等。
我就遇到过在ccs8.3和5.5死活不能连接某个旧版本仿真器，结果在ccs3.3却可以
Memory Map Initialization Complete
C28xx_CPU1: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map.
C28xx_CPU1: File Loader: Verification failed: Values at address 0x82001@Program do not match Please verify target memory and memory map.
C28xx_CPU1: GEL: File: D:\OneDrive\PACK19030\CPU1_19030.out: a data verification error occurred, file load failed.
mangui zhang：
回复 dirtwillfly:
这个很正常仿真器也需要确认能支持的CCS版本和MCU的系列型号
