烧录程序时出现C28xx: Trouble Writing Memory Block at 0xae0 on Page 1 of Length 0x1: (Error -1137 @ 0xAE1) Device is held in reset. Take the device out of reset, and retry the operation 芯片是F28034 各位TI大神帮忙看看。JTAG可以跟芯片通信，已经通过XXCML文件测试过。就是烧录的时候出现问题。-TI中文支持网

C28xx: GEL Output:

Device Calibration not complete, check if device is unlocked and recalibrate.C28xx: Failed CPU Reset: (Error -1137 @ 0x6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.576.0)

C28xx: Trouble Reading Register PC: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.576.0)

C28xx: Trouble Reading Register ST1: (Error -1137 @ 0x6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.576.0)

C28xx: GEL: Error while executing OnReset(1): Target failed to read register ST1

at (ST1&~(0x0100)) [f28034.gel:290]

at C28x_Mode() [f28034.gel:32]

at OnReset(1)

C28xx: Trouble Writing Memory Block at 0xae0 on Page 1 of Length 0x1: (Error -1137 @ 0xAE1) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.576.0)

C28xx: Error occurred during flash operation: Target failed to write 0x00000AE0@Data

C28xx: Trouble Writing Memory Block at 0xae1 on Page 1 of Length 0x1: (Error -1137 @ 0xAE2) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.576.0)

C28xx: Error occurred during flash operation: Target failed to write 0x00000AE1@Data

C28xx: Trouble Writing Memory Block at 0xae2 on Page 1 of Length 0x1: (Error -1137 @ 0xAE3) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.576.0)

C28xx: Error occurred during flash operation: Target failed to write 0x00000AE2@Data

C28xx: Trouble Writing Memory Block at 0xae3 on Page 1 of Length 0x1: (Error -1137 @ 0xAE4) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.576.0)

C28xx: Error occurred during flash operation: Target failed to write 0x00000AE3@Data

C28xx: Trouble Writing Memory Block at 0xae4 on Page 1 of Length 0x1: (Error -1137 @ 0xAE5) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.576.0)

C28xx: Error occurred during flash operation: Target failed to write 0x00000AE4@Data

C28xx: Trouble Writing Memory Block at 0xae5 on Page 1 of Length 0x1: (Error -1137 @ 0xAE6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.576.0)

C28xx: Error occurred during flash operation: Target failed to write 0x00000AE5@Data

C28xx: Trouble Writing Memory Block at 0xae6 on Page 1 of Length 0x1: (Error -1137 @ 0xAE7) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.576.0)

C28xx: Error occurred during flash operation: Target failed to write 0x00000AE6@Data

C28xx: Trouble Writing Memory Block at 0xae7 on Page 1 of Length 0x1: (Error -1137 @ 0xAE8) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.576.0)

C28xx: Error occurred during flash operation: Target failed to write 0x00000AE7@Data

C28xx: Flash Programmer: Device is locked or not connected. Operation cancelled.

C28xx: File Loader: Memory write failed: Unknown error

C28xx: GEL: File: E:\inverter_project\newinverter20181130\newinverter\Debug\newinverter.out: Load failed.

mangui zhang：检测一下芯片的复位或者时钟等是否工作正常我觉得关键的是lock
Device is locked or not connected. Operation cancelled