28377d芯片下载程序出错的问题

做的板子上有两路28377d芯片，电路完全一样，但是其中一路下载程序正常，另一路出错。具体错误如下，求各位大佬帮我，万分感谢！

C28xx_CPU1: GEL Output:Memory Map Initialization Complete
C28xx_CPU1: Failed CPU Reset: (Error -1137 @ 0x6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Reading Register PC: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Writing Register XAR0: (Error -1137 @ 0x7) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: GEL: Error while executing OnReset(1): Target failed to write register XAR0
at XAR0=*((unsigned long *) 0x703F0) [f28377d_cpu1.gel:350]
at SetupDCSM() [f28377d_cpu1.gel:32]
at OnReset(1)
C28xx_CPU1: Failed CPU Reset: (Error -1137 @ 0x6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Reading Register PC: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Writing Register XAR0: (Error -1137 @ 0x7) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: GEL: Error while executing OnReset(1): Target failed to write register XAR0
at XAR0=*((unsigned long *) 0x703F0) [f28377d_cpu1.gel:350]
at SetupDCSM() [f28377d_cpu1.gel:32]
at OnReset(1)
C28xx_CPU1: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map.
C28xx_CPU1: File Loader: Verification failed: Values at address 0x0000000000082000 do not match Please verify target memory and memory map.
C28xx_CPU1: GEL: File: D:\ccs6\ccs_work_dir\lab02_ram\Debug\lab02_ram.out: a data verification error occurred, file load failed.

Susan Yang：那您现在使用UNIFlash能识别芯片吗？用的是同一个仿真器？

做的板子上有两路28377d芯片，电路完全一样，但是其中一路下载程序正常，另一路出错。具体错误如下，求各位大佬帮我，万分感谢！

C28xx_CPU1: GEL Output:Memory Map Initialization Complete
C28xx_CPU1: Failed CPU Reset: (Error -1137 @ 0x6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Reading Register PC: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Writing Register XAR0: (Error -1137 @ 0x7) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: GEL: Error while executing OnReset(1): Target failed to write register XAR0
at XAR0=*((unsigned long *) 0x703F0) [f28377d_cpu1.gel:350]
at SetupDCSM() [f28377d_cpu1.gel:32]
at OnReset(1)
C28xx_CPU1: Failed CPU Reset: (Error -1137 @ 0x6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Reading Register PC: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Writing Register XAR0: (Error -1137 @ 0x7) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: GEL: Error while executing OnReset(1): Target failed to write register XAR0
at XAR0=*((unsigned long *) 0x703F0) [f28377d_cpu1.gel:350]
at SetupDCSM() [f28377d_cpu1.gel:32]
at OnReset(1)
C28xx_CPU1: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map.
C28xx_CPU1: File Loader: Verification failed: Values at address 0x0000000000082000 do not match Please verify target memory and memory map.
C28xx_CPU1: GEL: File: D:\ccs6\ccs_work_dir\lab02_ram\Debug\lab02_ram.out: a data verification error occurred, file load failed.

user5739360：

回复 Susan Yang:

您好，谢谢回复。我这次没有直接debug，而是一步步地连接、下载。发现连接也连接不上，报错如下：
C28xx_CPU1: GEL Output:
Memory Map Initialization Complete
C28xx_CPU1: Failed CPU Reset: (Error -1137 @ 0x6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)
C28xx_CPU1: Trouble Reading Register PC: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)
C28xx_CPU1: Trouble Writing Register XAR0: (Error -1137 @ 0x7) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)
C28xx_CPU1: GEL: Error while executing OnReset(1): Target failed to write register XAR0at XAR0=*((unsigned long *) 0x703F0) [f28377d_cpu1.gel:350]at SetupDCSM() [f28377d_cpu1.gel:32]at OnReset(1)
另外，我是新手，请问UniFlash是什么，怎么用呢？

做的板子上有两路28377d芯片，电路完全一样，但是其中一路下载程序正常，另一路出错。具体错误如下，求各位大佬帮我，万分感谢！

C28xx_CPU1: GEL Output:Memory Map Initialization Complete
C28xx_CPU1: Failed CPU Reset: (Error -1137 @ 0x6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Reading Register PC: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Writing Register XAR0: (Error -1137 @ 0x7) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: GEL: Error while executing OnReset(1): Target failed to write register XAR0
at XAR0=*((unsigned long *) 0x703F0) [f28377d_cpu1.gel:350]
at SetupDCSM() [f28377d_cpu1.gel:32]
at OnReset(1)
C28xx_CPU1: Failed CPU Reset: (Error -1137 @ 0x6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Reading Register PC: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Writing Register XAR0: (Error -1137 @ 0x7) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: GEL: Error while executing OnReset(1): Target failed to write register XAR0
at XAR0=*((unsigned long *) 0x703F0) [f28377d_cpu1.gel:350]
at SetupDCSM() [f28377d_cpu1.gel:32]
at OnReset(1)
C28xx_CPU1: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map.
C28xx_CPU1: File Loader: Verification failed: Values at address 0x0000000000082000 do not match Please verify target memory and memory map.
C28xx_CPU1: GEL: File: D:\ccs6\ccs_work_dir\lab02_ram\Debug\lab02_ram.out: a data verification error occurred, file load failed.

Susan Yang：

回复 user5739360:

CCS Uniflash is a standalone tool used to program on-chip flash memory on TI MCUs and on-board flash memory for Sitara processors. Uniflash has a GUI, command line, and scripting interface. CCS Uniflash is available free of charge.

Uniflash 可以独立下载固件到芯片，您可以下载来看一下

您现在提示的这种错误，之前也有客户遇到过，大部分都是硬件或者仿真器连接上的问题

做的板子上有两路28377d芯片，电路完全一样，但是其中一路下载程序正常，另一路出错。具体错误如下，求各位大佬帮我，万分感谢！

C28xx_CPU1: GEL Output:Memory Map Initialization Complete
C28xx_CPU1: Failed CPU Reset: (Error -1137 @ 0x6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Reading Register PC: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Writing Register XAR0: (Error -1137 @ 0x7) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: GEL: Error while executing OnReset(1): Target failed to write register XAR0
at XAR0=*((unsigned long *) 0x703F0) [f28377d_cpu1.gel:350]
at SetupDCSM() [f28377d_cpu1.gel:32]
at OnReset(1)
C28xx_CPU1: Failed CPU Reset: (Error -1137 @ 0x6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Reading Register PC: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Writing Register XAR0: (Error -1137 @ 0x7) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: GEL: Error while executing OnReset(1): Target failed to write register XAR0
at XAR0=*((unsigned long *) 0x703F0) [f28377d_cpu1.gel:350]
at SetupDCSM() [f28377d_cpu1.gel:32]
at OnReset(1)
C28xx_CPU1: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map.
C28xx_CPU1: File Loader: Verification failed: Values at address 0x0000000000082000 do not match Please verify target memory and memory map.
C28xx_CPU1: GEL: File: D:\ccs6\ccs_work_dir\lab02_ram\Debug\lab02_ram.out: a data verification error occurred, file load failed.

user5739360：

回复 Susan Yang:

您好，我下载了Uniflash试了试，结果还是报错，如下：
[2018/12/13 下午2:55:32] [ERROR] C28xx_CPU1: Failed CPU Reset: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 8.0.27.9)
[2018/12/13 下午2:55:32] [ERROR] C28xx_CPU1: Trouble Reading Register PC: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 8.0.27.9)
[2018/12/13 下午2:55:32] [ERROR] C28xx_CPU1: Trouble Writing Register XAR0: (Error -1137 @ 0x7) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 8.0.27.9)
[2018/12/13 下午2:55:32] [ERROR] C28xx_CPU1: GEL: Error while executing OnReset(1): Target failed to write register XAR0 at XAR0=*((unsigned long *) 0x703F0) [f28377d_cpu1.gel:408] at SetupDCSM() [f28377d_cpu1.gel:31] at OnReset(1)
[2018/12/13 下午2:55:32] [WARNING] C28xx_CPU1: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map.
[2018/12/13 下午2:55:32] [ERROR] C28xx_CPU1: File Loader: Verification failed: Values at address 0x82000@Program do not match Please verify target memory and memory map

我做了两块板，另一块板上的这路芯片可以下载程序，电路是完全一样的。

做的板子上有两路28377d芯片，电路完全一样，但是其中一路下载程序正常，另一路出错。具体错误如下，求各位大佬帮我，万分感谢！

C28xx_CPU1: GEL Output:Memory Map Initialization Complete
C28xx_CPU1: Failed CPU Reset: (Error -1137 @ 0x6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Reading Register PC: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Writing Register XAR0: (Error -1137 @ 0x7) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: GEL: Error while executing OnReset(1): Target failed to write register XAR0
at XAR0=*((unsigned long *) 0x703F0) [f28377d_cpu1.gel:350]
at SetupDCSM() [f28377d_cpu1.gel:32]
at OnReset(1)
C28xx_CPU1: Failed CPU Reset: (Error -1137 @ 0x6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Reading Register PC: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: Trouble Writing Register XAR0: (Error -1137 @ 0x7) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 6.0.14.5)C28xx_CPU1: GEL: Error while executing OnReset(1): Target failed to write register XAR0
at XAR0=*((unsigned long *) 0x703F0) [f28377d_cpu1.gel:350]
at SetupDCSM() [f28377d_cpu1.gel:32]
at OnReset(1)
C28xx_CPU1: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map.
C28xx_CPU1: File Loader: Verification failed: Values at address 0x0000000000082000 do not match Please verify target memory and memory map.
C28xx_CPU1: GEL: File: D:\ccs6\ccs_work_dir\lab02_ram\Debug\lab02_ram.out: a data verification error occurred, file load failed.

Susan Yang：

回复 user5739360:

那请请测试一下复位引脚的电平。另外这两个芯片烧录时的配置都是相同的？