TI中文支持网dsp烧写正常，点击运行就会报错。逐步运行发现是在系统初始化的时候保存，报错信息如下：
C28xx_CPU1: Error: (Error -1044 @ 0x0) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 8.1.0.00007)
C28xx_CPU1: Trouble Halting Target CPU: (Error -1135 @ 0x8525) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 8.1.0.00007)
C28xx_CPU1: Unable to determine target status after 20 attempts
C28xx_CPU1: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging
jtag在配置文件中的测试是正常的，请问各位朋友是哪里出了问题？
Susan Yang：
您使用的是自己的板子还是开发板？
除了烧写代码，您可以直接连接CCS吗？基本上启动目标配置文件，然后右键单击CPU并选择connect。如果可行，请查看是否可以通过CCS内存监视窗口访问内存位置。
一般这种报错硬件上有问题的概率比较大，E2E上也有类似的讨论
e2e.ti.com/…/749137
