TI中文支持网从NORMAL Mode切换到SHIP Mode后，按TS1激活和对地址0x04写入0x00都好像回不到NORMAL Mode，从bq76930读出来的电压数据始终不对，想请问怎么才能回到NORMAL Mode，回到初始激活的正常工作状态。
Vincent Li00：
To get the part of SLEEP into Active mode, the bq76930 requires an external "wake pulse" (>1V))on the TS1 Pin on the bottom group. The boot sequence and the voltage after the BOOT on TS1( >1V)–CAP1–> REGOUT–SCLK–>CAP2–CAP3. For the device to be commanded via the I2C into SLEEP mode by the controller; The device needs a 2 register write [SHUT_A, SHUT _B]= [0,1], [SHUT_A, SHUT _B]= [1,0]
