bq27220如何退出Rom mode

在配置bq27220的时候，不小心点到ENTER_ROM按钮，芯片进入ROM 模式了，请问如何退出？

This command sends the device into ROM mode in preparation for re-programming. The
OperationStatus()[SEC1, SEC0] = 0,1 AND 0xF00 to ManufacturerAccess(). The device goes to ROM
mode ready for updates; use 0x08 to ManufacturerAccess() to return.

我尝试在contol那里输入08，但是没作用.

Robin Liu：

根据产品线回复，如果您只是误点ENTER_ROM 按钮，并不是有意且无法与芯片通信，推荐您换一颗芯片即可