
TAS5825M: Audio line and signal problems
Part Number:TAS5825M Hi TI, (1) When using the TAS5825 EVM with PVDD at 20V, BD mode, and 384kHz switching frequency, we...

Part Number:TAS5825M Hi TI, (1) When using the TAS5825 EVM with PVDD at 20V, BD mode, and 384kHz switching frequency, we...
Part Number:TAS5825M Hello TI team, when I ultilized the TAS5825M as the woofer(PBTL mode, Mono Output), I noticed that ...

Part Number:TAS5825M 左侧为PPC3上显示的默认值是0 dB,生成的配置文件,和右侧手册描写不一致。 想手动写入threshold来控制DRC,能否公开配置的实际值dB和写入DSP的值之间的计算。 Links: 您好, ...
Part Number:TAS5825M 請問 想要讓TAS5825M達到最佳表現 請問以下兩點 . 1. TAS5825M 的PSRR & CMRR 相關規格 2. 電源為AD-DC供電 , 20...
Part Number:TAS5760LOther Parts Discussed in Thread: TAS5825M TAS5760L how do I configure the volume through the IIC, an...

Part Number:TAS5825M 软件根据声学提供的头部文件编写代码时 目前调试是data 先送 才送command 但整机调试不发声,部分参考如下 ; 如编写数据无问题还有何情况会出现代码写进去 整机不发声的情况 ? W...
Part Number:TAS5825MEVMOther Parts Discussed in Thread:TAS5825M Hi,您好: 现在想用TAS5825M的开发板,做一个包含Woofer和...

Part Number:TAS5825M Hi ti team, 当输入I2S CLOCK发生变化,会造成TAS5825M 不工作.Clock再次稳定,TAS5825M也不能恢复正常.请问有什么办法可以避免I2S CLOCK变化时,等Clo...

Part Number:TAS5825M 您好: 我在导入实验室测试的数据时,显示导入成功,如下图: 但是在打开EQ编辑界面时,数值发生了变换,如下图: 可以看出,我导入的频响曲线在1000Hz时是106.04dBSPL,但是...

Part Number:TAS5825M 您好: 我在使用PPC3时,需要将实验室测试的频响数据导入到PPC3软件中,方便后续EQ的调试工作。 但是,在导入过程中,PPC3立马闪退。导...