标签：ADS131M02

ADS131M02: DRDY引脚时钟处于高电平状态，无法得到ADC的输出。

2025-04-14sun yuanliang阅读(200)赞(0)

Part Number:ADS131M02 我在初步尝试在arduino内进行编程并使用该模块，目前通过串口我可以得到ID号，我想这说明目前的MCU和adc是可以正常进行SPI通信的。但我遇到的问题是，在我利用信号发生器产生一个&plusm...

2025-04-10Luo Yong阅读(247)赞(0)

Part Number:ADS131M02 我看datashet, 说采样率可以是64K, 但是在gpt的帮助下我尝试了: 1. 确定了输入频率为:8M: 2. 将clock配置中的TBM位, 置1: 0x0126即 00000001&nb...

2024-09-03阅读(334)赞(0)

Part Number:ADS131M02 Hi Experts: I have a question and I hope you can help me. Why do...

2024-06-24Ray Wang阅读(274)赞(1)

Part Number:ADS131M02 Dear Sir, Currently, STM32L412 is used to read ADS131M02. The data are all 0, but LA is no problem...

2023-08-03kaixin zheng阅读(318)赞(0)

Part Number:ADS131M02-Q1Other Parts Discussed in Thread:ADS131M02 We are currently debugging the ADS131M02 chip and have...

2022-09-21HE HE阅读(366)赞(0)

Part Number:ADS131M02 你好：问题：ADC数据的稳定时间过长,是否正常呢描述： ADC通道输入：1ms内电压从0连续变化到1.063v， ADC数据输出结果：3ms才稳定到目标值 ADC配置：数据输出速率32K，采样...

2022-05-16阅读(533)赞(0)

Part Number:ADS131M02Other Parts Discussed in Thread:ADS131M03 bool ADS131_readData(adc_channel_data *DataStruct)； uint1...