各位开发者:
大家好。我仿照TMDXLCDK6748的开发板自己制作了一块开发板,仿真器用的是索思达公司的SSD-XDS 510 PLUS,连接过程中,发生了下面的错误:
Error connecting to the target: (Error -2131 @ 0x0) Unable to access device register. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 5.0.569.0)
这是怎么回事,求高手指点。谢谢。
Gary Wu:
你好!之前的帖子看你问题解决了,这个贴是又出现问题了吗?
shen liu:
回复 Gary Wu:
Gary Wu,你好,这是又出现的新问题。
Gary Wu:
回复 shen liu:
我的理解是不报上一个提示的错误了,而变成这个错误提示了,是吗?
有无测量过JTAG的clk信号?
shen liu:
回复 Gary Wu:
是这样的,采用TMS320C6748BZWTA3做的系统,使用仿真器连接时一直连接不上(利用仿真器连接开发板时没问题), 测量硬件发现出现:JTAG的TRSTn引脚一直是低电平
shen liu:
回复 shen liu:
在连接板子时,是不是需要载入gel文件?gel文件里面是不是需要修改一些内容?