TI中文支持网各位大牛：本人刚接触6670不久 在跑pa_emac的例程时，用evm板能跑通，但用在仿真下部能通过，会报
TMS320C66x_0: Warning: Source MAC address & MAC address specified in config file don't match.
这样的警告，并且程序运行时事一直收不到包的
[TMS320C66x_0] **************************************************
[TMS320C66x_0] ******* Ethernet Single Core Example Start *******
[TMS320C66x_0] **************************************************
[TMS320C66x_0] QMSS successfully initialized[TMS320C66x_0] CPPI successfully initialized[TMS320C66x_0] PASS successfully initialized[TMS320C66x_0] Ethernet subsystem successfully initialized[TMS320C66x_0] Tx setup successfully done[TMS320C66x_0] Rx setup successfully done[TMS320C66x_0] PASS setup successfully done[TMS320C66x_0] Packet Transmission Start …[TMS320C66x_0] Packet Transmission Done.
[TMS320C66x_0] Wait for all packets to be Received …[TMS320C66x_0] Received 0 packets so far…
[TMS320C66x_0] Received 0 packets so far…
[TMS320C66x_0] Received 0 packets so far…
[TMS320C66x_0] Received 0 packets so far…
不知道在仿真器的设置中需要修改什么和在程序中需要修改什么，请大神指点
Andy Yin1：
仿真器下只能测试internal loopback模式，在板子上跑通了就ok了。
