安装的CCS6.2版本,test Connection 测试成功连接,但是debug时报错,让更新最新驱动,请问最新的XDS200驱动下载网址是多少?还有最新的MCSDK软件下载网址是多少
noaming:
你用的是TI的仿真器吗?XDS200驱动一般都包含在CCS里面了
Sunny:
回复 noaming:
您好noaming:
我用的是TCIEVMK2LX开发板,CCS安装的是最新的6.2版本,用的是TI的仿真器,XDS200的驱动也成功安装了,但是debug的时候报错,内容如下:
IcePick_D_0:Error initializing emulator:(Error-1056 @ 0x0) A firmware update is recommended for the XDS2XX debug probe. For XDS200 probes, update the firmware using the xds2XX_conf utility found in the …/ccs_base/common/uscif/xds2XX directory of the CCS installation.
noaming:
回复 Sunny:
TCIEVMK2LX这个开发板没有用过,出厂时它配套的仿真器是什么?
noaming:
回复 Sunny:
Updating the XDS200 firmware
http://processors.wiki.ti.com/index.php/XDS200#Updating_the_XDS200_firmware
Sunny:
回复 noaming:
板上集成的XDS200 模块,提供一根usb to miniusb线。在CCS6.2上配置完 target configuration后,点test configuration按键显示仿真器连接成功。
noaming:
回复 Sunny:
先试试上面的链接,根据步骤更新一下。
Sunny:
回复 noaming:
那个网址打不开,显示
An error occurred while processing your request.
Reference #97.71697668.1478491123.166d05a1
尝试多次都是这样
noaming:
回复 Sunny:
网站好像现在出了问题,网址没问题,稍后你再试试