TI中文支持网看了文档PRU ICSS EtherCAT Slave User Guide，里面提到要设置CCS的环境变量，我搜了些资料，配置了在WIN10环境下的环境变量，然后在命令行里根据文档的步骤执行以下命令行
- Open Command/Shell Prompt and navigate to
[INSTALL-DIR]/protocols/<protocol name>/projects - Run projectCreate.bat or projectCreate.sh. The batch file takes three mandatory command line arguments (The mandatory arguments are case sensitive!)
Usage format: projectCreate.bat [SOC] [PROCESSOR] [PROJECT_NAME]
- [SOC]
- The valid values for first command line argument [SOC] are
- AM571x – To generate a project specific to AM571x
- AM572x – To generate a project specific to AM572x
- AM437x – To generate a project specific to AM437x
- AM335x – To generate a project specific to AM335x
- AMIC11x – To generate a project specific to AMIC11x
- AMIC12x – To generate a project specific to AMIC12x
- K2G – To generate a project specific to K2G
- AM65xx – To generate a project specific to AM65xx
- The valid values for first command line argument [SOC] are
- [PROCESSOR]
- The valid values for second command line argument [PROCESSOR] are
- arm – To generate a project specific to ARM core
- The valid values for second command line argument [PROCESSOR] are
- [PROJECT_NAME]
- The valid values for third command line argument [PROJECT_NAME] to be used with EtherCAT slave installer package
- ethercat_slave_full – to generate EtherCAT slave full application project
- ethercat_slave_demo – to generate EtherCAT slave demo application project
- ecat_ti_esc_spi_master – to generate EtherCAT TI ESC SPI Mode Master application project (supported only for AM572x)
- ecat_ti_esc_spi_slave – to generate EtherCAT TI ESC SPI Mode Slave (ASIC Mode) application project (supported only for AMIC11x)
- ethercat_slave_cia402 – to generate Single-Chip Motor-Control application through Standard CiA402 Drive Profile over EtherCAT (supported only for AM437x)
- The valid values for third command line argument [PROJECT_NAME] to be used with EtherCAT slave installer package
我的板子是K2GICE，配置完毕，命令行显示的是路径错误，尝试了很多次，依然失败
Note
Nancy Wang：
请将具体错误贴出来看看。
同时也要检查一下ccs版本和SDK版本的匹配问题。
user18914063：
回复 Nancy Wang:
你好，这是我按照文档提示，执行了projectCreate.bat后得到的结果，本来我的是CCS7.4，但怎么老是说我安装路径是C\ti\ccsv8,而我的是安装在F盘的
user18914063：
回复 user18914063:
user18914063：
回复 user18914063:
怎么我截图发不出来啊，奇怪
user18914063：
回复 Nancy Wang:
user18914063：
回复 Nancy Wang:
这个是我的CCS安装路径的设置
Nancy Wang：
回复 user18914063:
直接在cmd命令窗口配置一下看看。
set SDK_INSTALL_PATH =
set TOOLS_INSTALL_PATH =
user18914063：
回复 Nancy Wang:
还是老样子
user18914063：
回复 Nancy Wang:
user18914063：
回复 user18914063:
最奇怪的是，怎么会出来一个CCSV8，我有从来没有安装过CCSV8，去C盘看了，啥都没有
