请问WIN7下最新的CCS是什么版本呀?

请问WIN7下最新的CCS是什么版本呀? CPU: OMAPL138

Tony Tang：

zengbo li：

回复 Tony Tang:

安装了8.1了, 现在的问题 我的防真器xds100v2 和 xds100v3两个仿真器都联接不上, 在CCS6.0使用正常 .请问还需要装什么驱动器?

This error is generated by TI's USCIF driver or utilities.

The value is '-151' (0xffffff69).
The title is 'SC_ERR_FTDI_OPEN'.

The explanation is:
One of the FTDI driver functions used during the connect
returned bad status or an error. The cause may be one or
more of: no XDS100 is plugged in, invalid XDS100 serial number,
blank XDS100 EEPROM, missing FTDI drivers, faulty USB cable.
Use the xds100serial command-line utility in the 'common/uscif'
folder to verify the XDS100 can be located.

[End: Texas Instruments XDS100v3 USB Debug Probe_0]

Shine：

回复 zengbo li:

TI的仿真器驱动是CCS里自带的，ccs8支持的操作系统如下
processors.wiki.ti.com/…/System_Requirements