想用两个网口在同一个网段下链接两个主机,只有一个能ping通一个不能,在不同网段,两台主机都能ping通,这是为什么?我想在同一个网段,请教各位工程师,谢谢!
Shine:
是否有参考过cpsw wiki网站的constraints
Both the interfaces should not be connected to the same subnet unless only configuring bridging, and not doing IP routing, then you can configure the two interfaces on the same subnet.
processors.wiki.ti.com/…/Linux_Core_CPSW_User's_Guide
lu Cao2:
回复 Shine:
谢谢您,但在同一个网段还是不能和两个主机ping通,是底层就不支持吗?
yongqing wang:
回复 lu Cao2:
需要配置成静态静态IP
yongqing wang:
回复 yongqing wang:
使用route命设置网卡的路由表
yongqing wang:
回复 yongqing wang:
你可以参考这个帖子,里面讲解了不同网段和相同网段的配置方法
lu Cao2:
回复 yongqing wang:
哪个帖子?您是没贴出来吗?
lu Cao2:
回复 yongqing wang:
我是配的静态ip啊
lu Cao2:
回复 yongqing wang:
这个 我没研究过,试试 谢谢
TI中文支持网
