TI中文支持网
TI专业的中文技术问题搜集分享网站

DM8168 内核启动 ,加载时间长

Kernel bootargs validated
amixer: Cannot find the given element from control default

amixer: Cannot find the given element from control default

SysLink version : 2.20.02.20
SysLink module created on Date:Apr 2 2015 Time:16:38:26
Trace enabled
Trace SetFailureReason enabled
Setting DMM priority for [DUCATI ] to [0] ( 0x4e000624 = 0x08000000 )
Setting DMM priority for [HDVICP0 ] to [2] ( 0x4e000634 = 0x0000000a )
Setting DMM priority for [HDVICP1 ] to [2] ( 0x4e000634 = 0x000a0000 )
Setting DMM priority for [HDVICP2 ] to [2] ( 0x4e000634 = 0x00a00000 )
/opt/dvr_rdk/ti816x
Attached to slave procId 2.
Loaded file ../firmware/dvr_rdk_fw_m3vpss_1024M_256M.xem3 on slave procId 2.
Started slave procId 2.
After Ipc_loadcallback status [0x00000000]
After Ipc_startcallback status [0x00000000]
Attached to slave procId 0.
DMA: Module install successful, device major num = 248DRV: Module install successful
DRV: Module built on Feb 5 2015 16:07:20 [c6xdsp ] Remote Debug Shared Memory @ 0xbf000000
[m3video] Remote Debug Shared Memory @ 0xbf010820
[m3vpss ] Remote Debug Shared Memory @ 0xbf021040
Attached to slave procId 1.
Loaded file ../firmware/dvr_rdk_fw_c6xdsp_1024M_256M.xe674 on slave procId 0.
Started slave procId 0.
After Ipc_loadcallback status [0x00000000]
After Ipc_startcallback status [0x00000000]
Loaded file ../firmware/dvr_rdk_fw_m3video_1024M_256M.xem3 on slave procId 1.
Started slave procId 1.
After Ipc_loadcallback status [0x00000000]
After Ipc_startcallback status [0x00000000]

[m3vpss ] Received character 's'
[c6xdsp ] Remote Debug Shared Memory @ 0xbf000000
[m3video] Remote Debug Shared Memory @ 0xbf010820
[m3vpss ] Remote Debug Shared Memory @ 0xbf021040
[m3video] Received character 's'
[c6xdsp ] Remote Debug Shared Memory @ 0xbf000000
[m3video] Remote Debug Shared Memory @ 0xbf010820
[m3vpss ] Remote Debug Shared Memory @ 0xbf021040
[c6xdsp ] Received character 's'

Chris Meng:

你好,

你说的内核仅仅是linux的内核还是包含了m3/dsp的firmware?

xu wang:

回复 Chris Meng:

包含了m3/dsp。就是在启动过程中,

After Ipc_loadcallback status [0x00000000]After Ipc_startcallback status [0x00000000]

[m3vpss ] Received character 's' [c6xdsp ] Remote Debug Shared Memory @ 0xbf000000

它们之间会停顿半分钟左右。

Chris Meng:

回复 xu wang:

你好,

请试试下面论坛讨论里的patch,看是否有帮助?
e2e.ti.com/…/259739

赞(0)
未经允许不得转载:TI中文支持网 » DM8168 内核启动 ,加载时间长
分享到: 更多 (0)