TI中文支持网z-Stack中MAC_INTERNAL_API uint8 macRadioSetTxPower(uint8 txPower)设置TXpower ,协议栈在哪里配置TxPower,听说默认值1dB在哪里设置的，在哪里修改默认值，安装官方的genricAPP做出来发射电流34mA，是不是表明发射功率是4.5dB,待接收状态工作电流30mA，我用的芯片是cc2531
Yue TANG：
初始化的Txpower由macPibDefaults决定。如下。所以没有使用PA时，默认是0dbm. 对照datasheet,34mA,是4.5dbm的发射功率，当然是不考虑其他外设耗电的情况，你可以IAR调试的时候看TXPOWER寄存器嘛，如果是0XF5就是4.5dbm,其他值请对照datasheet.
#if defined (HAL_PA_LNA) 19, /* phyTransmitPower for CC2591 */#elif defined (HAL_PA_LNA_CC2590) 11, /* phyTransmitPower for CC2590 */#else 0, /* phyTransmitPower without frontend */#endif
const uint8 CODE macRadioDefsTxPwrBare[] ={ 3, /* tramsmit power level of the first entry */ (uint8)(int8)-22, /* transmit power level of the last entry */ /* 3 dBm */ 0xF5, /* characterized as 4.5 dBm in datasheet */ /* 2 dBm */ 0xE5, /* characterized as 2.5 dBm in datasheet */ /* 1 dBm */ 0xD5, /* characterized as 1 dBm in datasheet */ /* 0 dBm */ 0xD5, /* characterized as 1 dBm in datasheet */ /* -1 dBm */ 0xC5, /* characterized as -0.5 dBm in datasheet */ /* -2 dBm */ 0xB5, /* characterized as -1.5 dBm in datasheet */ /* -3 dBm */ 0xA5, /* characterized as -3 dBm in datasheet */ /* -4 dBm */ 0x95, /* characterized as -4 dBm in datasheet */ /* -5 dBm */ 0x95, /* -6 dBm */ 0x85, /* characterized as -6 dBm in datasheet */ /* -7 dBm */ 0x85, /* -8 dBm */ 0x75, /* characterized as -8 dBm in datasheet */ /* -9 dBm */ 0x75, /* -10 dBm */ 0x65, /* characterized as -10 dBm in datasheet */ /* -11 dBm */ 0x65, /* -12 dBm */ 0x55, /* characterized as -12 dBm in datasheet */ /* -13 dBm */ 0x55, /* -14 dBm */ 0x45, /* characterized as -14 dBm in datasheet */ /* -15 dBm */ 0x45, /* -16 dBm */ 0x35, /* characterized as -16 dBm in datasheet */ /* -17 dBm */ 0x35, /* -18 dBm */ 0x25, /* characterized as -18 dBm in datasheet */ /* -19 dBm */ 0x25, /* -20 dBm */ 0x15, /* characterized as -20 dBm in datasheet */ /* -21 dBm */ 0x15, /* -22 dBm */ 0x05 /* characterized as -22 dBm in datasheet */};
