adc通道该怎么切换?????求TI大神帮帮忙啊

我要采样每支引脚的数据并转换，之前有指点过我可以使用分时复用来切换物理路，但尝试了一下发现，它没有重启下一个的转换，该怎么使用TI提供的ADC中断???如何切换通道并开启下一组转换???麻烦TI大神~~~~~

//adc test
//

#include <stdint.h>
#include <stdio.h>
#include <unistd.h>

#include <ti/drivers/ADCBuf.h>
#include <ti/drivers/UART.h>
#if defined(CC2650DK_7ID) || defined(CC1310DK_7XD)
#include <ti/drivers/PIN.h>
#endif

#include "Board.h"

#define ADCBUFFERSIZE (1)

uint16_t sampleBufferOne[ADCBUFFERSIZE];
uint16_t sampleBufferTwo[ADCBUFFERSIZE];
uint32_t microVoltBuffer[ADCBUFFERSIZE];
uint32_t buffersCompletedCounter = 0;
char uartTxBuffer[(10 * ADCBUFFERSIZE) + 25];

UART_Handle uart;

int c =0; //一组adc转换的次数
int q =0; //第几组/第几pin 做adc转换

void adcBufCallback(ADCBuf_Handle handle, ADCBuf_Conversion *conversion, void *completedADCBuffer, uint32_t completedChannel) {

uint_fast16_t i;
uint_fast16_t uartTxBufferOffset;
ADCBuf_adjustRawValues(handle, completedADCBuffer, ADCBUFFERSIZE, completedChannel);
ADCBuf_convertAdjustedToMicroVolts(handle, completedChannel, completedADCBuffer, microVoltBuffer, ADCBUFFERSIZE);
uartTxBufferOffset = sprintf(uartTxBuffer, "\r\nBuffer %u finished:\r\n", (unsigned int)buffersCompletedCounter++);
for (i = 0; i < ADCBUFFERSIZE; i++)
{
uartTxBufferOffset += sprintf(uartTxBuffer + uartTxBufferOffset, "%u,", (unsigned int)microVoltBuffer[i]);
}
uartTxBuffer[uartTxBufferOffset] = '\n';
UART_write(uart, uartTxBuffer, uartTxBufferOffset + 1);

//********************************************************************
c++;
//转换30次 : 0-29
if(c%30==0)
{
ADCBuf_convertCancel(handle);
ADCBuf_close(handle);
}
//********************************************************************

}

void uartCallback(UART_Handle handle, void *buf, size_t count)
{
return;
}

void *mainThread(void *arg0)
{

UART_Params uartParams;
ADCBuf_Handle adcBuf;
ADCBuf_Params adcBufParams;
ADCBuf_Conversion continuousConversion;
ADCBuf_init();
UART_init();
#if defined(CC2650DK_7ID) || defined(CC1310DK_7XD)
PIN_State pinState;

PIN_Config AlsPinTable[] =
{
Board_ALS_PWR | PIN_GPIO_OUTPUT_EN | PIN_GPIO_HIGH | PIN_PUSHPULL, // Turn on ALS power /
PIN_TERMINATE // Terminate list /
};

PIN_open(&pinState, AlsPinTable);
#endif

UART_Params_init(&uartParams);
uartParams.writeDataMode = UART_DATA_BINARY;
uartParams.writeMode = UART_MODE_CALLBACK;
uartParams.writeCallback = uartCallback;
uartParams.baudRate = 115200;
uart = UART_open(Board_UART0, &uartParams);

ADCBuf_Params_init(&adcBufParams);
adcBufParams.callbackFxn = adcBufCallback;
adcBufParams.recurrenceMode = ADCBuf_RECURRENCE_MODE_CONTINUOUS;
adcBufParams.returnMode = ADCBuf_RETURN_MODE_CALLBACK;
adcBufParams.samplingFrequency = 0.2;
adcBuf = ADCBuf_open(CC1310_LAUNCHXL_ADCBUF0, &adcBufParams);

for(q=0;q<8;q++)
{
continuousConversion.arg = NULL; //NULL
continuousConversion.adcChannel = q; //6
continuousConversion.sampleBuffer = sampleBufferOne;
continuousConversion.sampleBufferTwo = sampleBufferTwo;
continuousConversion.samplesRequestedCount = ADCBUFFERSIZE;

//********************************************************************
//********************************************************************

if (!adcBuf)
{
while(1);
}

if (ADCBuf_convert(adcBuf, &continuousConversion, 1) !=ADCBuf_STATUS_SUCCESS)
{
while(1);
}

while(1)
{
sleep(1000);

}

}
}

da qin zheng sheng：

重新初始化adc,修改对应的adc引脚。

hoya：

回复 da qin zheng sheng:

您好，您说的初始化adc指的是ADCBUF_init()吗?是在void *mainThread(void *arg0)里面初始化吗?

hoya：

回复 user3763235:

HI:Choret Longer

谢谢您的分享!