TI中文支持网CC3200站点已经接入路由，然后怎么操作，能建立一个httpsever
我把lRetVal = ConnectToNetwork();改为站点连接服务器的函数，其它没怎么变，输入站点IP，打不开网页，希望高手指点一下
Ken Wang：
你是要链接到server上面，还是用CC3200作为http server，然其他的设备访问呢？
谢谢
user1898644：
回复 Ken Wang:
CC3200作为http sever接入路由，局域网内设备访问它，最后把电脑上的防火墙和杀毒软件关了，能正常使用了，另外想问一下怎么改变http sever 的端口
Ken Wang：
回复 user1898644:
这个在源代码里面应该有配置，你可以产看一下。
谢谢
Yonghua Pan：
回复 user1898644:
/*! \brief Internal function for setting network application configurations
\return On success, zero is returned. On error, -1 is returned
\param[in] AppId Application id, could be one of the following: \n – SL_NET_APP_HTTP_SERVER_ID – SL_NET_APP_DHCP_SERVER_ID – SL_NET_APP_MDNS_ID – SL_NET_APP_DEVICE_CONFIG_ID
\param[in] SetOptions set option, could be one of the following: \n – SL_NET_APP_DHCP_SERVER_ID – NETAPP_SET_DHCP_SRV_BASIC_OPT – SL_NET_APP_HTTP_SERVER_ID – NETAPP_SET_GET_HTTP_OPT_PORT_NUMBER – NETAPP_SET_GET_HTTP_OPT_AUTH_CHECK – NETAPP_SET_GET_HTTP_OPT_AUTH_NAME – NETAPP_SET_GET_HTTP_OPT_AUTH_PASSWORD – NETAPP_SET_GET_HTTP_OPT_AUTH_REALM – NETAPP_SET_GET_HTTP_OPT_ROM_PAGES_ACCESS – SL_NET_APP_MDNS_ID – NETAPP_SET_GET_MDNS_CONT_QUERY_OPT – NETAPP_SET_GET_MDNS_QEVETN_MASK_OPT – NETAPP_SET_GET_MDNS_TIMING_PARAMS_OPT – SL_NET_APP_DEVICE_CONFIG_ID – NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN – NETAPP_SET_GET_DEV_CONF_OPT_DOMAIN_NAME
\param[in] OptionLen option structure length
\param[in] pOptionValues pointer to the option structure \sa \note \warning \par \code Set DHCP Server (AP mode) parameters example: SlNetAppDhcpServerBasicOpt_t dhcpParams; _u8 outLen = sizeof(SlNetAppDhcpServerBasicOpt_t); dhcpParams.lease_time = 4096; // lease time (in seconds) of the IP Address dhcpParams.ipv4_addr_start = SL_IPV4_VAL(192,168,1,10); // first IP Address for allocation. IP Address should be set as Hex number – i.e. 0A0B0C01 for (10.11.12.1) dhcpParams.ipv4_addr_last = SL_IPV4_VAL(192,168,1,16); // last IP Address for allocation. IP Address should be set as Hex number – i.e. 0A0B0C01 for (10.11.12.1) sl_NetAppStop(SL_NET_APP_DHCP_SERVER_ID); // Stop DHCP server before settings sl_NetAppSet(SL_NET_APP_DHCP_SERVER_ID, NETAPP_SET_DHCP_SRV_BASIC_OPT, outLen, (_u8* )&dhcpParams); // set parameters sl_NetAppStart(SL_NET_APP_DHCP_SERVER_ID); // Start DHCP server with new settings \endcode \code Set Device URN name example: Device name, maximum length of 33 characters Device name affects URN name, own SSID name in AP mode, and WPS file "device name" in WPS I.E (STA-WPS / P2P) In case no device URN name set, the default name is "mysimplelink" Allowed characters in device name are: 'a – z' , 'A – Z' , '0-9' and '-'
_u8 *my_device = "MY-SIMPLELINK-DEV"; sl_NetAppSet (SL_NET_APP_DEVICE_CONFIG_ID, NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN, strlen(my_device), (_u8 *) my_device); \endcode
*/#if _SL_INCLUDE_FUNC(sl_NetAppSet)_i32 sl_NetAppSet(const _u8 AppId ,const _u8 Option,const _u8 OptionLen,const _u8 *pOptionValue);#endif
