TI中文支持网烧录编译好的固件…原本是用uniflash烧录的..然后一直烧不不上…说重启设备..然后重启了没什么反应就打算用jlink烧了
[16:52:14] Begin Format operation.
[16:52:15] INFO: > Executing Operation: Connect
[16:52:17] INFO: setting break signal
[16:52:17] INFO: — please restart the device —
[16:52:28] ERROR: —reading ACK signal failed—
[16:52:28] WARNING: —seting break signal to false failed—
[16:52:30] INFO: setting break signal
[16:52:30] INFO: — please restart the device —
[16:52:40] ERROR: —reading ACK signal failed—
[16:52:40] WARNING: —seting break signal to false failed—
[16:52:42] INFO: setting break signal
[16:52:42] INFO: — please restart the device —
[16:52:42] Cancelling current process <Format>, please wait…
[16:52:56] ERROR: —reading ACK signal failed—
[16:52:56] WARNING: —seting break signal to false failed—
[16:52:58] INFO: setting break signal
[16:52:58] INFO: — please restart the device —
[16:52:58] INFO: Cancel button pressed
[16:52:58] WARNING: —seting break signal to false failed—
[16:52:58] FATAL: — Can't connect to device !! —
[16:52:58] FATAL: Error connecting to the device. Please check your COM port settings. Error code: -2
Yue TANG：
IAR环境只能debug，不能烧录。
12 a：
回复 Yue TANG:
那怎么用jtag烧录
Yue TANG：
回复 12 a:
jtag不能烧录
da qin zheng sheng：
回复 12 a:
可以实现，难度非常大！
Terry Han：
目前CCS UniFlash对CC3200进行烧写只能通过UART串口下载，
