买了tidm-1000的开发套件,控制板买的ti提供的配套28379D的controlcard。现在的问题是countrolsuite里面提供的例程是28377D的。在ccs7.4.0里面把targetconfigs和variant修改成28379D。编译没报错。debug的时候总是提示:c28xx-CPU1:GEL:Error while executing Ontargetconnect():identifier not found:ST1。报了好几个错误,都是说gel.
这个问题卡了几天了,有木有大神遇到过这个问题的
user3789962:补充下:电脑不能联网。所以装的离线版本的ccs。在自己电脑上装ccs的时候发现安装过程中,软件会自动从官网下载些东西还提示打Windows补丁。由于调试程序的电脑不能联网,这个会不会也有影响?有没有可能导致以上报错信息?
买了tidm-1000的开发套件,控制板买的ti提供的配套28379D的controlcard。现在的问题是countrolsuite里面提供的例程是28377D的。在ccs7.4.0里面把targetconfigs和variant修改成28379D。编译没报错。debug的时候总是提示:c28xx-CPU1:GEL:Error while executing Ontargetconnect():identifier not found:ST1。报了好几个错误,都是说gel.
这个问题卡了几天了,有木有大神遇到过这个问题的
Seven Han:您用的哪个版本的ccs?
您试下烧掉工程中的仿真器配置文件.ccxml.通过view-target configuration重新建一个配置文件。
买了tidm-1000的开发套件,控制板买的ti提供的配套28379D的controlcard。现在的问题是countrolsuite里面提供的例程是28377D的。在ccs7.4.0里面把targetconfigs和variant修改成28379D。编译没报错。debug的时候总是提示:c28xx-CPU1:GEL:Error while executing Ontargetconnect():identifier not found:ST1。报了好几个错误,都是说gel.
这个问题卡了几天了,有木有大神遇到过这个问题的
user3789962:
回复 Seven Han:
试过。我用的7.4版本的。配置文件更新为560V2和28379D了。但是问题依然存在。controlsuite版本是3.4.7。
买了tidm-1000的开发套件,控制板买的ti提供的配套28379D的controlcard。现在的问题是countrolsuite里面提供的例程是28377D的。在ccs7.4.0里面把targetconfigs和variant修改成28379D。编译没报错。debug的时候总是提示:c28xx-CPU1:GEL:Error while executing Ontargetconnect():identifier not found:ST1。报了好几个错误,都是说gel.
这个问题卡了几天了,有木有大神遇到过这个问题的
Seven Han:
回复 user3789962:
该contolcard板载仿真器是XDS100V2,所以target configuration配置为xds100v2,您只需要使用一根usb连到电脑端就可以仿真了。
买了tidm-1000的开发套件,控制板买的ti提供的配套28379D的controlcard。现在的问题是countrolsuite里面提供的例程是28377D的。在ccs7.4.0里面把targetconfigs和variant修改成28379D。编译没报错。debug的时候总是提示:c28xx-CPU1:GEL:Error while executing Ontargetconnect():identifier not found:ST1。报了好几个错误,都是说gel.
这个问题卡了几天了,有木有大神遇到过这个问题的
user3789962:
回复 Seven Han:
哦哦,明天试下
买了tidm-1000的开发套件,控制板买的ti提供的配套28379D的controlcard。现在的问题是countrolsuite里面提供的例程是28377D的。在ccs7.4.0里面把targetconfigs和variant修改成28379D。编译没报错。debug的时候总是提示:c28xx-CPU1:GEL:Error while executing Ontargetconnect():identifier not found:ST1。报了好几个错误,都是说gel.
这个问题卡了几天了,有木有大神遇到过这个问题的
user3789962:
回复 Seven Han:
你好,在28379D的controlcared上把SW1开关打为01(第一个为序号1的开关),用XDS100V2链接,在test connection上测试,报DR和IR都错误。请问这是哪的问题?我用的8.0版本的ccs
买了tidm-1000的开发套件,控制板买的ti提供的配套28379D的controlcard。现在的问题是countrolsuite里面提供的例程是28377D的。在ccs7.4.0里面把targetconfigs和variant修改成28379D。编译没报错。debug的时候总是提示:c28xx-CPU1:GEL:Error while executing Ontargetconnect():identifier not found:ST1。报了好几个错误,都是说gel.
这个问题卡了几天了,有木有大神遇到过这个问题的
Seven Han:
回复 user3789962:
sw1都要置1,具体需要查看controlcard手册:
:\ti\controlSUITE\development_kits\~controlCARDs\TMDSCNCD28379D_v1_0
买了tidm-1000的开发套件,控制板买的ti提供的配套28379D的controlcard。现在的问题是countrolsuite里面提供的例程是28377D的。在ccs7.4.0里面把targetconfigs和variant修改成28379D。编译没报错。debug的时候总是提示:c28xx-CPU1:GEL:Error while executing Ontargetconnect():identifier not found:ST1。报了好几个错误,都是说gel.
这个问题卡了几天了,有木有大神遇到过这个问题的
user3789962:
回复 Seven Han:
Test 2 Word 4: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 5: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 6: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 7: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
The details of the first 8 errors have been provided.
The utility will now report only the count of failed tests.
Scan tests: 2, skipped: 0, failed: 1
Do a test using 0xFE03E0E2.
Scan tests: 3, skipped: 0, failed: 2
Do a test using 0x01FC1F1D.
Scan tests: 4, skipped: 0, failed: 3
Do a test using 0x5533CCAA.
Scan tests: 5, skipped: 0, failed: 4
Do a test using 0xAACC3355.
Scan tests: 6, skipped: 0, failed: 5
Some of the values were corrupted – 83.3 percent.
The JTAG IR Integrity scan-test has failed.
—–[Perform the Integrity scan-test on the JTAG DR]————————
This test will use blocks of 64 32-bit words.
This test will be applied just once.
Do a test using 0xFFFFFFFF.
Scan tests: 1, skipped: 0, failed: 0
Do a test using 0x00000000.
Test 2 Word 0: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 1: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 2: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 3: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 4: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 5: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 6: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
Test 2 Word 7: scanned out 0x00000000 and scanned in 0xFFFFFFFF.
The details of the first 8 errors have been provided.
The utility will now report only the count of failed tests.
Scan tests: 2, skipped: 0, failed: 1
Do a test using 0xFE03E0E2.
Scan tests: 3, skipped: 0, failed: 2
Do a test using 0x01FC1F1D.
Scan tests: 4, skipped: 0, failed: 3
Do a test using 0x5533CCAA.
Scan tests: 5, skipped: 0, failed: 4
Do a test using 0xAACC3355.
Scan tests: 6, skipped: 0, failed: 5
Some of the values were corrupted – 83.3 percent.
The JTAG DR Integrity scan-test has failed.
[End: Texas Instruments XDS100v2 USB Debug Probe_0]
开关SW1都置一了,开发环境是CCS8.0,套件是28379D的controlcard。设定XDS100V2测试连接报的错。感觉像XDS100V2的驱动没装一样。
用MProg工具看了下FT2232的配置,如下图:
设备管理器显示的驱动情况如下:
买了tidm-1000的开发套件,控制板买的ti提供的配套28379D的controlcard。现在的问题是countrolsuite里面提供的例程是28377D的。在ccs7.4.0里面把targetconfigs和variant修改成28379D。编译没报错。debug的时候总是提示:c28xx-CPU1:GEL:Error while executing Ontargetconnect():identifier not found:ST1。报了好几个错误,都是说gel.
这个问题卡了几天了,有木有大神遇到过这个问题的
Seven Han:
回复 user3789962:
请问您现在可以连上仿真器了么?
买了tidm-1000的开发套件,控制板买的ti提供的配套28379D的controlcard。现在的问题是countrolsuite里面提供的例程是28377D的。在ccs7.4.0里面把targetconfigs和variant修改成28379D。编译没报错。debug的时候总是提示:c28xx-CPU1:GEL:Error while executing Ontargetconnect():identifier not found:ST1。报了好几个错误,都是说gel.
这个问题卡了几天了,有木有大神遇到过这个问题的
Seven Han:
回复 user3789962:
没有使用过MProg烧录,我以上说的是通过ccs烧录,看您的MProg好像是串口烧写,您是否有尝试用直接ccs烧写。