ULC1001-DRV290XEVM: The mechanical design of the LCS-FL-RNG15

Hello,

1、 Could you please let me know when the LCS-FL-RNG15 will be back in stock?

      It has been listed as out of stock on the website for several months.

2、For the transducer used in the LCS-FL-RNG15, are the positive and negative terminals located on the top and bottom surfaces, on the two ends of the outer wall, or on the inner and outer walls?

     Are the wires soldered directly to the two terminals of the transducer?

Best regards,

Joy

Daniel：

您好

已经收到了您的案例，调查需要些时间，感谢您的耐心等待

,

Lydia：

Hi，

Please refer toHailong Chen's reply in your English forum post.

e2e.ti.com/…/ulc1001-drv290xevm-the-mechanical-design-of-the-lcs-fl-rng15

,

Joy：

If a wrap-around type electrode transducer in the required size cannot be sourced, would cutting its outer diameter, inner diameter, or thickness with a diamond cutter or glass cutter damage its physical properties?

,

Lydia：

Hi Joy，

If you have any further questions, please continue to contact Chen from the English forum.e2e.ti.com/…/ulc1001-drv290xevm-the-mechanical-design-of-the-lcs-fl-rng15