Part Number:CC2400
Dear Team,
尊敬的技术团队:
I am currently working with the Ubertooth development board (based on CC2400 design) and attempting to retrieve I/Q data from the ATEST1/2 pins. Following the user manual, I have configured the registers as follows:
我正在使用基于CC2400设计的Ubertooth开发板,尝试从ATEST1/2引脚获取I/Q数据。根据用户手册的指导,我已按如下方式配置寄存器:
– **ATESTMOD_PD = 0** [to disable power down]
– **ATESTMOD_MODE = 0x2** [to output signals from the VGA]
Additionally, I have connected the pins to an oscilloscope.
此外,我已将引脚与示波器连接。
I have also modified the Ubertooth firmware to implement the necessary register changes. While using the Ubertooth's Rx functionality, I can successfully obtain **decoded Bluetooth broadcast information** from the command line. However, I still cannot observe the expected signals on the oscilloscope.
我同时修改了Ubertooth的固件以实现相应的寄存器更改。在使用Ubertooth的接收功能时,我可以通过命令行**获得解码后的蓝牙广播信息**,但在示波器上仍无法观测到期望的信号。
Upon powering the device, I observed a constant voltage of **0.7V** on the oscilloscope, which does not correspond to either a high or low logic level.
设备上电后,我在示波器上观察到一条**0.7V**的直线,这既不属于高电平也不属于低电平的逻辑状态。
Could you kindly advise if there are additional registers that need to be configured or any other operations I might be missing?
烦请告知是否需要配置其他寄存器,或是否有其他操作我尚未执行?
Thank you in advance for your assistance.
感谢您提前提供的帮助。
Best regards.
此致
敬礼
Links:
您好,
我注意到您已经在技术论坛发帖了,所以请继续保持跟帖,直至您的疑问全部被解决。
(+) CC2400: I/Q Data Output from ATEST1/2 Pins – Other wireless technologies forum – Other wireless – TI E2E support forums
TRANSLATE with x
English
Arabic
Hebrew
PolishBulgarian
Hindi
PortugueseCatalan
Hmong Daw
RomanianChinese Simplified
Hungarian
RussianChinese Traditional
Indonesian
SlovakCzech
Italian
SlovenianDanish
Japanese
SpanishDutch
Klingon
SwedishEnglish
Korean
ThaiEstonian
Latvian
TurkishFinnish
Lithuanian
UkrainianFrench
Malay
UrduGerman
Maltese
VietnameseGreek
Norwegian
WelshHaitian Creole
PersianTRANSLATE with
COPY THE URL BELOW
BackEMBED THE SNIPPET BELOW IN YOUR SITE
Enable collaborative features and customize widget: Bing Webmaster Portal
Back
TI中文支持网
