CC2642R: 使用AES_CBC 加密 在AESWriteToKeyStore时出错

我使用cc2642，进行AES_CBC加密操作，按照sysconfig中的example，完成了初始化、设置参数等步骤，与例子使用相同的key、iv、input。

#include <ti/drivers/AESCBC.h>
#include <ti/drivers/cryptoutils/cryptokey/CryptoKeyPlaintext.h>
...
AESCBC_Handle handle;
CryptoKey cryptoKey;
int_fast16_t encryptionResult;
// For example purposes only. Generate IVs in a non-static way in practice.
// Test vector 0 from NIST CAPV set CBCMMT128
uint8_t iv[16] ={0x2f, 0xe2, 0xb3, 0x33, 0xce, 0xda, 0x8f, 0x98,0xf4, 0xa9, 0x9b, 0x40, 0xd2, 0xcd, 0x34, 0xa8};
uint8_t plaintext[16] ={0x45, 0xcf, 0x12, 0x96, 0x4f, 0xc8, 0x24, 0xab,0x76, 0x61, 0x6a, 0xe2, 0xf4, 0xbf, 0x08, 0x22};
uint8_t ciphertext[sizeof(plaintext)];
uint8_t keyingMaterial[16] ={0x1f, 0x8e, 0x49, 0x73, 0x95, 0x3f, 0x3f, 0xb0,0xbd, 0x6b, 0x16, 0x66, 0x2e, 0x9a, 0x3c, 0x17};
// The ciphertext should be the following after the encryption operation:
//  0x0f, 0x61, 0xc4, 0xd4, 0x4c, 0x51, 0x47, 0xc0
//  0x3c, 0x19, 0x5a, 0xd7, 0xe2, 0xcc, 0x12, 0xb2
handle = AESCBC_open(0, NULL);
if (handle == NULL) {// handle error
}
CryptoKeyPlaintext_initKey(&cryptoKey, keyingMaterial, sizeof(keyingMaterial));
AESCBC_OneStepOperation operation;
AESCBC_OneStepOperation_init(&operation);
operation.key= &cryptoKey;
operation.input= plaintext;
operation.output= ciphertext;
operation.inputLength= sizeof(plaintext);
operation.iv= iv;
encryptionResult = AESCBC_oneStepEncrypt(handle, &operation);
if (encryptionResult != AESCBC_STATUS_SUCCESS) {// handle error
}
AESCBC_close(handle);

在运行完encryptionResult = AESCBC_oneStepEncrypt(handle, &operation);后，结果是失败AESCBC_STATUS_ERROR状态，未能完成加密。

经过单步调试，发现程序跑到AESCBCCC26XX.c中的AESWriteToKeyStore(keyingMaterial, keyLength, AES_KEY_AREA_6) != AES_SUCCESS这个判断失败的。

/** Load the key from RAM or flash into the key store at* a hardcoded and reserved location*/if (AESWriteToKeyStore(keyingMaterial, keyLength, AES_KEY_AREA_6) != AES_SUCCESS){return AESCBC_STATUS_ERROR;}

代码不能找到AESWriteToKeyStore这个函数（编译是通过的）。请问这个是SDK的问题还是算法使用设置的问题？

yan jiang：

查看AESCBCCC26XX.c，发现头文件中路径的aes.h是有

#include DeviceFamily_constructPath(driverlib/aes.h)

声明如下：

//*****************************************************************************
//
//! \brief Transfer a key from main memory to a key area within the key store.
//!
//!The crypto DMA transfers the key and function does not return until
//!the operation completes.
//!The keyStore can only contain valid keys of one \c aesKeyLength at
//!any one point in time. The keyStore cannot contain both 128-bit and
//!256-bit keys simultaneously. When a key of a different \c aesKeyLength
//!from the previous \c aesKeyLength is loaded, all previous keys are
//!invalidated.
//!
//! \param [in] aesKey Pointer to key. Does not need to be word-aligned.
//!
//! \param [in] aesKeyLength The key size in bytes.
//!Currently, 128-bit, 192-bit, and 256-bit keys are supported.
//! - \ref AES_128_KEY_LENGTH_BYTES
//! - \ref AES_192_KEY_LENGTH_BYTES
//! - \ref AES_256_KEY_LENGTH_BYTES
//!
//! \param [in] keyStoreArea The key store area to transfer the key to.
//!When using 128-bit keys, only the specified key store
//!area will be occupied.
//!When using 256-bit or 192-bit keys, two consecutive
//!key areas are used to store the key.
//! - \ref AES_KEY_AREA_0
//! - \ref AES_KEY_AREA_1
//! - \ref AES_KEY_AREA_2
//! - \ref AES_KEY_AREA_3
//! - \ref AES_KEY_AREA_4
//! - \ref AES_KEY_AREA_5
//! - \ref AES_KEY_AREA_6
//! - \ref AES_KEY_AREA_7
//!
//!When using 256-bit or 192-bit keys, the 8 \c keyStoreArea's are
//!split into four sets of two. Selecting any \c keyStoreArea automatically
//!occupies the second \c keyStoreArea of the tuples below:
//!
//! - (\ref AES_KEY_AREA_0, \ref AES_KEY_AREA_1)
//! - (\ref AES_KEY_AREA_2, \ref AES_KEY_AREA_3)
//! - (\ref AES_KEY_AREA_4, \ref AES_KEY_AREA_5)
//! - (\ref AES_KEY_AREA_6, \ref AES_KEY_AREA_7)
//!
//!For example: if \c keyStoreArea == \ref AES_KEY_AREA_2,
//!both \ref AES_KEY_AREA_2 and \ref AES_KEY_AREA_3 are occupied.
//!If \c keyStoreArea == \ref AES_KEY_AREA_5, both \ref AES_KEY_AREA_4 and \ref AES_KEY_AREA_5 are occupied.
//!
//! \return Returns a status code depending on the result of the transfer.
//!If there was an error in the read process itself, an error is
//!returned.
//!Otherwise, a success code is returned.
//! - \ref AES_KEYSTORE_ERROR
//! - \ref AES_SUCCESS
//!
//! \sa AESReadFromKeyStore
//
//*****************************************************************************
extern uint32_t AESWriteToKeyStore(const uint8_t *aesKey, uint32_t aesKeyLength, uint32_t keyStoreArea);

在代码中直接查看AESWriteToKeyStore的定义是显示找不到的。

运行时，返回了错误。我更换了另一个cc2642的硬件，问题仍在。

,

yan jiang：

在函数说明中看，似乎错误是因为in the read process itself，没有更多的提示了，read过程出了什么问题呢？

,

Alex Zhang：

您好，请提供一下您这边使用的sdk版本以及ccs版本号，提供您这边使用的是哪个demo

,

yan jiang：

感谢回复，我查到了我的问题了，使用加密时，我将整个流程做了个封装，传入的key在封装函数中使用sizeof计算长度，得到的是4（即key指针长度），并不是key数组的长度，导致计算出错

,

Alex Zhang：

不客气，有问题随时来论坛交流，谢谢