AWR2944EVM: MMW DEMO TDM mmWave Start failed!

Hi.

  Hardware:AWR2944 REV.D,Software:SDK:mmwave_mcuplus_sdk_04_03_00_01, CCS:ccs1210,mmWave_Demo_Visualizer4.3.0
use ccs,launch cxml,on dsp core, i load C:\ti\mmwave_mcuplus_sdk_04_03_00_01\mmwave_mcuplus_sdk_04_03_00_01\ti\demo\awr294x\mmw\awr2944_mmw_demo_dssTDMENET.xe66
on arm core, i load C:\ti\mmwave_mcuplus_sdk_04_03_00_01\mmwave_mcuplus_sdk_04_03_00_01\ti\demo\awr294x\mmw\awr2944_mmw_demo_mssTDMENET.xer5f
use mmWave_Demo_Visualizer4.3.0 to load C:\ti\mmwave_mcuplus_sdk_04_03_00_01\mmwave_mcuplus_sdk_04_03_00_01\ti\demo\awr294x\mmw\profiles\tdm_awr2944\profile_2d_2AzimTx.cfg
but the ccs console debug information is that:mmWave Start failed! so what's wrong with the demo ?

 THANKS!

Shine：

请看一下板子上的芯片硅版本是1.0还是2.0？Figure 11-1. Device Nomenclature https://www.ti.com/lit/ds/symlink/awr2944.pdf

Xiang Liping 说：mmwave_mcuplus_sdk_04_03_00_01,

如果是2.0，需要使用 SDK 4.4版本。