TI中文支持网Part Number:AWR1642BOOST
我按照DCA1000EVM使用指南 – 嵌入式处理 – 技术文章 – E2E
设计支持 (ti.com)上的步骤使用mmwave_studio_02_01_01_00进行数据采集
文中“9）在数据获取结束之后，LED灯DATA_TRAN_RPG绿光闪烁一次，并保持常绿。表明数据获取成功。点击PostProc，出现如下结果：“此时我的DATA_TRAN_RPG绿光闪烁几秒之后保持常绿，但是点击PostProc时报错：【Error : The number of files captured is zero!】
下图是我的硬件连接
下面是我采集过程中的相关信息
GM: Constructor
GM: Tue Feb 14 00:04:17 2023
RSTD.Transmit("/Settings")
[00:04:17]
[00:04:17] ### Running Startup script: "C:\Apps\mmwave\studio\mmwave_studio_02_01_01_00\mmWaveStudio\Scripts\Startup.lua" ###
[00:04:17] RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")
[00:04:17] RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")
[00:04:17] Scripter ignored: Attempt to UnBuild() again or before Build.
[00:04:17] RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\Apps\\mmwave\\studio\\mmwave_studio_02_01_01_00\\mmWaveStudio\\Clients\\\\LabClient.dll")
[00:04:17] RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")
[00:04:17] RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")
[00:04:17] RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")
[00:04:17] RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")
[00:04:17] RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")
[00:04:17] RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\Apps\\mmwave\\studio\\mmwave_studio_02_01_01_00\\mmWaveStudio\\RunTime\\SAL.dll")
[00:04:17] RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")
[00:04:17] RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")
[00:04:17] RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")
[00:04:17] RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")
[00:04:17] RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")
[00:04:17] RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")
[00:04:17] RSTD.Transmit("/")
[00:04:17] RSTD.SaveSettings(): Settings saved to "C:\Users\34922\AppData\Roaming\RSTD\config.xml"
[00:04:17] RSTD.Build()
[00:04:17] RSTD.SaveSettings(): Settings saved to "C:\Users\34922\AppData\Roaming\RSTD\config.xml"
[00:04:17] RSTD.Transmit("/")
[00:04:17] RSTD.AL_Build()
[00:04:17] RSTD.AL_LoadXml()
[00:04:17] RSTD.Transmit("/")
[00:04:17] RSTD.AL_Init()
[00:04:17] RSTD.Clients_Build()
[00:04:17] GM: Init
[00:04:17] GM: Loaded 'C:\Apps\mmwave\studio\mmwave_studio_02_01_01_00\mmWaveStudio\Clients\\LabClient.dll'
[00:04:17] GM: 1 Guest (s) init
[00:04:17] GM: 1 Module(s) init
[00:04:17] GM: 2 Tab(s) init
[00:04:18] RSTD.Client_LoadXml()
[00:04:18] [RadarAPI]: ar1.selectRadarMode(0)
[00:04:18] [RadarAPI]: Status: Passed
[00:04:18] Matlab Runtime Engine is installed
[00:04:18] [RadarAPI]: Starting Matlab Engine..
[00:04:20] [RadarAPI]: Matlab Engine Started!
[00:04:21] [RadarAPI]: ar1.selectCascadeMode(0)
[00:04:21] [RadarAPI]: Status: Passed
[00:04:21] [RadarAPI]: ar1.LoadSettings('C:\Users\34922\AppData\Roaming\RSTD\ar1gui.ini')
[00:04:21] TESTING = false
[00:04:21] RstdNet: Port 2777: Listening..
[00:04:21]
[00:04:21] ***Script completed successfully.***
[00:04:24] [RadarAPI]: Opening Gpio Control Port()
[00:04:24] [RadarAPI]: Status: Passed
[00:04:25] [RadarAPI]: Opening Board Control Port()
[00:04:25] [RadarAPI]: Status: Passed
[00:04:26] [RadarAPI]: ar1.FullReset()
[00:04:26] [RadarAPI]: Status: Passed
[00:04:27] [RadarAPI]: Closing Board Control Port()
[00:04:27] [RadarAPI]: Status: Passed
[00:04:27] [RadarAPI]: Closing Gpio Control Port()
[00:04:27] [RadarAPI]: Status: Passed
[00:04:27] [RadarAPI]: ar1.SOPControl(2)
[00:04:27] [RadarAPI]: Status: Passed
[00:04:27] [RadarAPI]: ar1.Connect(13,115200,1000)
[00:04:29] [RadarAPI]: ar1.Calling_IsConnected()
[00:04:30] [RadarAPI]: ar1.SelectChipVersion("AR1642")
[00:04:30] [RadarAPI]: Status: Passed
[00:04:30] [RadarAPI]: ar1.SelectChipVersion("AR1642")
[00:04:30] [RadarAPI]: Status: Passed
[00:04:30] [RadarAPI]: ar1.deviceVariantSelection("XWR1642")
[00:04:30] [RadarAPI]: Status: Passed
[00:04:30] [RadarAPI]: ar1.frequencyBandSelection("77G")
[00:04:30] [RadarAPI]: ar1.SelectChipVersion("XWR1642")
[00:04:30] [RadarAPI]: Status: Passed
[00:04:30] Device Status : XWR1642/ASIL-B/SOP:2/ES:2
[00:04:30] [RadarAPI]: ar1.SaveSettings('C:\Users\34922\AppData\Roaming\RSTD\ar1gui.ini')
[00:04:31] [RadarAPI]: ar1.DownloadBSSFw("C:\\Apps\\mmwave\\studio\\mmwave_studio_02_01_01_00\\rf_eval_firmware\\radarss\\xwr16xx_radarss.bin")
[00:04:32] [RadarAPI]: Downloading BSS Patch RPRC Binary..
[00:04:39] [RadarAPI]: ar1.GetBSSFwVersion()
[00:04:39] [RadarAPI]: BSSFwVersion:(02.00.00.01 (05/10/17))
[00:04:40] [RadarAPI]: ar1.DownloadMSSFw("C:\\Apps\\mmwave\\studio\\mmwave_studio_02_01_01_00\\rf_eval_firmware\\masterss\\xwr16xx_masterss.bin")
[00:04:40] [RadarAPI]: ar1.GetBSSPatchFwVersion()
[00:04:40] [RadarAPI]: BSSPatchFwVersion:(01.02.05.02 (30/04/19))
[00:04:40] [RadarAPI]: Downloading MSS RPRC Binary..
[00:04:51] [RadarAPI]: ar1.GetMSSFwVersion()
[00:04:51] [RadarAPI]: MSSFwVersion:(01.02.05.02 (16/07/19))
[00:04:53] MSS power up done async event received!
[00:04:53] [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0)
[00:04:53] [RadarAPI]: Status: Passed
[00:04:55] [RadarAPI]: ar1.SelectChipVersion("AR1642")
[00:04:55] [RadarAPI]: Status: Passed
[00:04:55] [RadarAPI]: ar1.SelectChipVersion("XWR1642")
[00:04:55] [RadarAPI]: Status: Passed
[00:04:55] Device Status : XWR1642/ASIL-B/SOP:2/ES:2
[00:04:55] [RadarAPI]: ar1.RfEnable()
[00:04:56] BSS power up done async event received!
[00:04:56] [RadarAPI]: Status: Passed
[00:04:56] [RadarAPI]: ar1.GetMSSFwVersion()
[00:04:56] [RadarAPI]: MSSFwVersion:(01.02.05.02 (16/07/19))
[00:04:56] [RadarAPI]: ar1.GetBSSFwVersion()
[00:04:56] [RadarAPI]: BSSFwVersion:(02.00.00.01 (05/10/17))
[00:04:57] [RadarAPI]: ar1.GetBSSPatchFwVersion()
[00:04:57] [RadarAPI]: BSSPatchFwVersion:(01.02.05.02 (30/04/19))
[00:05:09] [RadarAPI]: ar1.ChanNAdcConfig(1, 1, 0, 1, 1, 1, 1, 2, 1, 0)
[00:05:09] [RadarAPI]: Status: Passed
[00:05:12] [RadarAPI]: ar1.LPModConfig(0, 0)
[00:05:12] [RadarAPI]: Status: Failed, Error Type: REGULAR ADC MODE NOT SUPPORTED IN 5 MHz PART VARIANT DEVICE
[00:05:14] [RadarAPI]: ar1.RfInit()
[00:05:14] RF Init async event received!
[00:05:14] [RadarAPI]: Time stamp, Temperture: 18522,46; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; TxPhase Status, Update: 0, 0; RxIQMM Status, Update: 1, 1;
[00:05:14] [RadarAPI]: Status: Passed
[00:05:16] [RadarAPI]: ar1.SetCalMonFreqLimitConfig(77,81)
[00:05:16] [RadarAPI]: Status: Passed
[00:05:21] [RadarAPI]: ar1.DataPathConfig(513, 1216644097, 0)
[00:05:21] [RadarAPI]: Status: Passed
[00:05:22] [RadarAPI]: ar1.LvdsClkConfig(1, 1)
[00:05:22] [RadarAPI]: Status: Passed
[00:05:24] [RadarAPI]: ar1.LVDSLaneConfig(0, 1, 1, 0, 0, 1, 0, 0)
[00:05:24] [RadarAPI]: Status: Passed
[00:05:40] [RadarAPI]: ar1.ProfileConfig(0, 77, 7, 3, 60, 0, 0, 0, 0, 0, 0, 64.019, 0, 256, 5120, 0, 0, 30)
[00:05:40] [RadarAPI]: Status: Passed
[00:05:43] [RadarAPI]: ar1.ChirpConfig(0, 0, 0, 0, 0, 0, 0, 1, 1, 0)
[00:05:43] [RadarAPI]: Status: Passed
[00:05:50] Test Source Already Disabled...!!!
[00:05:50] [RadarAPI]: ar1.DisableTestSource(0)
[00:05:50] [RadarAPI]: Status: Passed
[00:05:50] [RadarAPI]: ar1.FrameConfig(0, 0, 200, 128, 40, 0, 0, 1)
[00:05:50] [RadarAPI]: Status: Passed
[00:05:52] [RadarAPI]: ar1.GetCaptureCardDllVersion()
[00:05:52] [RadarAPI]: Sending dll_version command to DCA1000
[00:05:52] [RadarAPI]:
[00:05:52] DLL Version : 1.0
[00:05:52] [RadarAPI]: ar1.SelectCaptureDevice("DCA1000")
[00:05:52] [RadarAPI]: Status: Passed
[00:05:53] [RadarAPI]: ar1.CaptureCardConfig_EthInit("192.168.33.30", "192.168.33.180", "12:34:56:78:90:12", 4096, 4098)
[00:05:53] [RadarAPI]: ar1.CaptureCardConfig_Mode(1, 2, 1, 2, 3, 30)
[00:05:53] [RadarAPI]: ar1.CaptureCardConfig_PacketDelay(25)
[00:05:54] [RadarAPI]: Sending fpga command to DCA1000
[00:05:54] [RadarAPI]:
[00:05:54] FPGA Configuration command : Success
[00:05:54] [RadarAPI]: Sending record command to DCA1000
[00:05:54] [RadarAPI]:
[00:05:54] Configure Record command : Success
[00:05:54] [RadarAPI]: ar1.GetCaptureCardFPGAVersion()
[00:05:54] [RadarAPI]: Sending fpga_version command to DCA1000
[00:05:54] [RadarAPI]:
[00:05:54]
[00:05:54] FPGA Version : 2.8 [Record]
[00:05:54]
[00:05:57] [RadarAPI]: ar1.CaptureCardConfig_StartRecord("C:\\Apps\\mmwave\\studio\\mmwave_studio_02_01_01_00\\mmWaveStudio\\PostProc\\adc_data.bin", 1)
[00:05:57] [RadarAPI]: Sending start_record command to DCA1000
[00:06:01] [RadarAPI]: ar1.StartFrame()
[00:06:01] [RadarAPI]: Status: Passed
[00:06:01] Frame start async event received!
[00:06:07] [RadarAPI]:
[00:06:07] Start Record :
[00:06:07] Timeout Error! System disconnected
[00:06:09] Frame End async event received!
[00:06:09] [RadarAPI]: Frame Ended
[00:06:15] [RadarAPI]: ar1.StartMatlabPostProc("C:\\Apps\\mmwave\\studio\\mmwave_studio_02_01_01_00\\mmWaveStudio\\PostProc\\adc_data.bin")
[00:06:15] [RadarAPI]: No of files Captured: 0, Total no of frames for each device : 200
[00:06:15] Error : The number of files captured is zero!
以下是我的获得的文件
恳请指正，期待您的答复！
Shine：
请看一下SW2.5是否设置成了hardware mode硬件触发模式？
