TDA4VM: root@j7-evm:/opt/vision_apps# APP_LOG: ERROR: Unable to map memory @ 0xb2000000 of size 262144 byte!

Arago 2021.09 j7-evm ttyS2

j7-evm login: root
root@j7-evm:~#
root@j7-evm:~#
root@j7-evm:~#
root@j7-evm:~#
root@j7-evm:~#
root@j7-evm:~# /opt/vision_apps# dmesg | grep rpmsg
-sh: /opt/vision_apps#: No such file or directory
root@j7-evm:~# cd /opt/vision_apps
root@j7-evm:/opt/vision_apps# dmesg | grep rpmsg
[ 11.637265] virtio_rpmsg_bus virtio0: rpmsg host is online
[ 12.079137] virtio_rpmsg_bus virtio1: rpmsg host is online
[ 12.097202] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addr 0xd
[ 12.097357] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xe
[ 12.131007] virtio_rpmsg_bus virtio2: rpmsg host is online
[ 12.146006] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xd
root@j7-evm:/opt/vision_apps# [ 140.469551] Initializing XFRM netlink socket
[ 141.920365] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update you.
[ 141.923246] Bridge firewalling registered
[ 142.527194] process 'docker/tmp/qemu-check185105001/check' started with executable stack

root@j7-evm:/opt/vision_apps#
root@j7-evm:/opt/vision_apps#
root@j7-evm:/opt/vision_apps#
root@j7-evm:/opt/vision_apps#
root@j7-evm:/opt/vision_apps#
root@j7-evm:/opt/vision_apps#
root@j7-evm:/opt/vision_apps#
root@j7-evm:/opt/vision_apps#
root@j7-evm:/opt/vision_apps#
root@j7-evm:/opt/vision_apps# source ./vision_apps_init.sh
root@j7-evm:/opt/vision_apps# APP_LOG: ERROR: Unable to map memory @ 0xb2000000 of size 262144 byte!

Shine：

请问是自己的板子么？SDK是哪个版本？

请看一下下面的帖子是否有帮助？https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1066937/tda4vm-run-vision_apps_init-sh-got-error-app_log_unable-to-map-memory-0xb2000000-of-size-262144-bytes

,

??? ?：

使用的官方EVM板子，SDK版本目前我在使用ti-processor-sdk-rtos-j721e-evm-08_04_00_06原始代码

,

??? ?：

我对照你发的这个看了下，里面的BOOT包含了uenv.txt,并且这个文件内包含了name_overlays=k3-j1721e-vision-apps.dtbo

,

Shine：

上面帖子里另外两个帖子有参考么？https://e2e.ti.com/support/processors-group/processors/f/processors-forum/998049/tda4vm-app_log-error-unable-to-map-memory-0xb2000000-of-size-262144-byteshttps://e2e.ti.com/support/processors-group/processors/f/processors-forum/999665/tda4vm-source-vision_apps_init-sh-got-error-unable-to-map-memory-0xb2000000-of-size-262144-bytes

,

??? ?：

U-Boot SPL 2021.01-ga169f42610 (Aug 31 2022 – 13:24:02 +0000)Model: Texas Instruments K3 J721E SoC Board: J721EX-PM2-SOM rev A SYSFW ABI: 3.1 (firmware rev 0x0008 '8.4.1–v08.04.01 (Jolly Jellyfi')Trying to boot from MMC2Starting ATF on ARM64 core…

NOTICE: BL31: v2.6(release):v2.7-rc0-dirty NOTICE: BL31: Built : 12:56:56, Aug 31 2022 I/TC: I/TC: OP-TEE version: 3.17.0-125-g15a746d28 (gcc version 9.2.1 20191025 (GNU To4I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check optee.readthedocs.io/…/architecturelI/TC: Primary CPU initializing I/TC: SYSFW ABI: 3.1 (firmware rev 0x0008 '8.4.1–v08.04.01 (Jolly Jellyfi') I/TC: HUK Initialized I/TC: Activated SA2UL device I/TC: Enabled firewalls for SA2UL TRNG device I/TC: SA2UL TRNG initialized I/TC: SA2UL Drivers initialized I/TC: Primary CPU switching to normal world boot U-Boot SPL 2021.01-ga169f42610 (Aug 31 2022 – 12:57:57 +0000) Model: Texas Instruments K3 J721E SoC Board: J721EX-PM2-SOM rev A SYSFW ABI: 3.1 (firmware rev 0x0008 '8.4.1–v08.04.01 (Jolly Jellyfi') Detected: J7X-BASE-CPB rev A Detected: J7X-VSC8514-ETH rev E2 Trying to boot from MMC2 U-Boot 2021.01-ga169f42610 (Aug 31 2022 – 12:57:57 +0000) SoC: J721E SR1.1 GP Model: Texas Instruments K3 J721E SoC Board: J721EX-PM2-SOM rev A DRAM: 4 GiB Flash: 0 Bytes MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1 Loading Environment from FAT… OK In: serial@2800000 Out: serial@2800000 Err: serial@2800000 am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA0Detected: J7X-BASE-CPB rev A Detected: J7X-VSC8514-ETH rev E2 cdns,sierra serdes@5000000: sierra probed Net: eth0: ethernet@46000000port@1 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 Failed to load 'boot.scr' 483 bytes read in 8 ms (58.6 KiB/s) Loaded env from uEnv.txt Importing environment from mmc1 … Running uenvcmd … 1 bytes read in 9 ms (0 Bytes/s) Already setup. gpio: pin gpio@22_17 (gpio 281) value is 1 gpio: pin gpio@22_16 (gpio 280) value is 0 k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work k3_r5f_rproc r5f@41400000: Core 2 is already in use. No rproc commands work 1383860 bytes read in 68 ms (19.4 MiB/s) Load Remote Processor 2 with data@addr=0x82000000 1383860 bytes: Success! 302028 bytes read in 23 ms (12.5 MiB/s) Load Remote Processor 3 with data@addr=0x82000000 302028 bytes: Success! Failed to load '/lib/firmware/j7-main-r5f1_0-fw' Failed to load '/lib/firmware/j7-main-r5f1_1-fw' 1469172 bytes read in 71 ms (19.7 MiB/s) Load Remote Processor 6 with data@addr=0x82000000 1469172 bytes: Success! 1469172 bytes read in 71 ms (19.7 MiB/s) Load Remote Processor 7 with data@addr=0x82000000 1469172 bytes: Success! 12980176 bytes read in 217 ms (57 MiB/s) Load Remote Processor 8 with data@addr=0x82000000 12980176 bytes: Success! 18303488 bytes read in 765 ms (22.8 MiB/s) 104096 bytes read in 13 ms (7.6 MiB/s) Failed to load '/boot/k3-j721e-vision-apps.dtbo' ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 000000008fee3000, end 000000008fffffff … OK Starting kernel … [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] [ 0.000000] Linux version 5.10.120-rt70-gadb96c641c (oe-user@oe-host) (aarch2[ 0.000000] Machine model: Texas Instruments K3 J721E SoC [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, B[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, B[ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, B[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, B[ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, B[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, B[ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, B[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, B[ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, B[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, B[ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, B[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, B[ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, B[ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a6000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, B[ 0.000000] OF: reserved mem: initialized node c66-memory@a6100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, B[ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a7000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, B[ 0.000000] OF: reserved mem: initialized node c66-memory@a7100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, B[ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, B[ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ac000000, B[ 0.000000] OF: reserved mem: initialized node r5f-virtual-eth-queues@ac0000l[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ac200000, B[ 0.000000] OF: reserved mem: initialized node r5f-virtual-eth-buffers@ac200l[ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a8ffffff] [ 0.000000] node 0: [mem 0x00000000a9000000-0x00000000a9ffffff] [ 0.000000] node 0: [mem 0x00000000aa000000-0x00000000abbfffff] [ 0.000000] node 0: [mem 0x00000000abc00000-0x00000000abffffff] [ 0.000000] node 0: [mem 0x00000000ac000000-0x00000000adffffff] [ 0.000000] node 0: [mem 0x00000000ae000000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff] [ 0.000000] On node 0 totalpages: 1048576 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 524288 pages, LIFO batch:63 [ 0.000000] Normal zone: 8192 pages used for memmap [ 0.000000] Normal zone: 524288 pages, LIFO batch:63 [ 0.000000] cma: Reserved 512 MiB at 0x00000000e0000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 18 pages/cpu s35008 r8192 d30528 u73728 [ 0.000000] pcpu-alloc: s35008 r8192 d30528 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmt[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 byte)[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes,)[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000dc000000-0x00000000e00000)[ 0.000000] Memory: 3272148K/4194304K available (10688K kernel code, 1170K r)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 ji.[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->9[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (fla)[ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000880030000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000088004000[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless[ 0.000000] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398s[ 0.008386] Console: colour dummy device 80×25 [ 0.012952] Calibrating delay loop (skipped), value calculated using timer f)[ 0.023621] pid_max: default: 32768 minimum: 301 [ 0.028378] LSM: Security Framework initializing [ 0.033130] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, lin)[ 0.040708] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)[ 0.049562] rcu: Hierarchical SRCU implementation. [ 0.054749] Platform MSI: msi-controller@1820000 domain created [ 0.061005] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controllerd[ 0.070316] EFI services will not be available. [ 0.075061] smp: Bringing up secondary CPUs … I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot [ 0.088417] Detected PIPT I-cache on CPU1 [ 0.092528] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 [ 0.099560] GICv3: CPU1: using allocated LPI pending table @0x000000088005000[ 0.106972] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] [ 0.113703] smp: Brought up 1 node, 2 CPUs [ 0.117898] SMP: Total of 2 processors activated. [ 0.122707] CPU features: detected: 32-bit EL0 Support [ 0.127961] CPU features: detected: CRC32 instructions [ 0.141612] CPU: All CPU(s) started at EL2 [ 0.145809] alternatives: patching kernel code [ 0.150851] devtmpfs: initialized [ 0.160330] KASLR disabled due to lack of seed [ 0.164963] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms[ 0.174927] futex hash table entries: 512 (order: 4, 65536 bytes, linear) [ 0.188396] pinctrl core: initialized pinctrl subsystem [ 0.194059] DMI not present or invalid. [ 0.198325] NET: Registered protocol family 16 [ 0.203592] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.210913] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic alls[ 0.218975] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic as[ 0.227316] thermal_sys: Registered thermal governor 'step_wise' [ 0.227788] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.240890] ASID allocator initialised with 65536 entries [ 0.266457] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.273327] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.280187] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.287043] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.294472] cryptd: max_cpu_qlen set to 1000 [ 0.300622] k3-chipinfo 43000014.chipid: Family:J721E rev:SR2.0 JTAGID[0x1bbd[ 0.309448] vsys_3v3: supplied by evm_12v0 [ 0.313831] vsys_5v0: supplied by evm_12v0 [ 0.318669] iommu: Default domain type: Translated [ 0.323814] SCSI subsystem initialized [ 0.327995] mc: Linux media interface: v0.10 [ 0.332385] videodev: Linux video capture interface: v2.00 [ 0.338027] pps_core: LinuxPPS API ver. 1 registered [ 0.343108] pps_core: Software ver. 5.3.6 – Copyright 2005-2007 Rodolfo Giom>[ 0.352447] PTP clock support registered [ 0.356466] EDAC MC: Ver: 3.0.0 [ 0.360287] FPGA manager framework [ 0.363819] Advanced Linux Sound Architecture Driver Initialized. [ 0.370450] clocksource: Switched to clocksource arch_sys_counter [ 0.376783] VFS: Disk quotas dquot_6.6.0 [ 0.380815] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.390739] NET: Registered protocol family 2 [ 0.395481] IP idents hash table entries: 65536 (order: 7, 524288 bytes, lin)[ 0.404112] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 131)[ 0.413027] TCP established hash table entries: 32768 (order: 6, 262144 byte)[ 0.421259] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes, lin)[ 0.430677] TCP: Hash tables configured (established 32768 bind 32768) [ 0.437539] UDP hash table entries: 2048 (order: 6, 262144 bytes, linear) [ 0.444728] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes, linea)[ 0.452472] NET: Registered protocol family 1 [ 0.457270] RPC: Registered named UNIX socket transport module. [ 0.463337] RPC: Registered udp transport module. [ 0.468142] RPC: Registered tcp transport module. [ 0.472944] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.479527] PCI: CLS 0 bytes, default 64 [ 0.483926] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte[ 0.494422] Initialise system trusted keyrings [ 0.499081] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.507692] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.513962] NFS: Registering the id_resolver key type [ 0.519249] Key type id_resolver registered [ 0.523522] Key type id_legacy registered [ 0.527658] nfs4filelayout_init: NFSv4 File Layout Driver Registering… [ 0.534539] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registerin.[ 0.542217] 9p: Installing v9fs 9p2000 file system support [ 0.566875] Key type asymmetric registered [ 0.571075] Asymmetric key parser 'x509' registered [ 0.576078] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )[ 0.583645] io scheduler mq-deadline registered [ 0.588271] io scheduler kyber registered [ 0.593871] pinctrl-single 4301c000.pinctrl: 94 pins, size 376 [ 0.600086] pinctrl-single 11c000.pinctrl: 173 pins, size 692 [ 0.608637] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [ 0.614933] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [ 0.622965] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.631120] arm-smmu-v3 36600000.iommu: ias 48-bit, oas 48-bit (features 0x0)[ 0.639376] arm-smmu-v3 36600000.iommu: allocated 65536 entries for cmdq [ 0.646468] arm-smmu-v3 36600000.iommu: allocated 32768 entries for evtq [ 0.655093] arm-smmu-v3 36600000.iommu: msi_domain absent – falling back to s[ 0.668510] brd: module loaded [ 0.675664] loop: module loaded [ 0.679356] megasas: 07.714.04.00-rc1 [ 0.685048] tun: Universal TUN/TAP device driver, 1.6 [ 0.690533] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.696942] igbvf: Copyright (c) 2009 – 2012 Intel Corporation. [ 0.703024] sky2: driver version 1.30 [ 0.707342] VFIO – User Level meta-driver version: 0.3 [ 0.713113] i2c /dev entries driver [ 0.717366] sdhci: Secure Digital Host Controller Interface driver [ 0.723691] sdhci: Copyright(c) Pierre Ossman [ 0.728335] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.734817] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping …. [ 0.742034] optee: probing for conduit method. [ 0.746599] optee: revision 3.17 (15a746d2) [ 0.746741] optee: dynamic shared memory is enabled E/TC:0 0 std_entry_with_parg:234 Bad arg address 0x880db5000 [ 0.761548] optee: initialized driver [ 0.766668] NET: Registered protocol family 17 [ 0.771305] 9pnet: Installing 9P2000 support [ 0.775712] Key type dns_resolver registered [ 0.780236] printk: bootconsole [ns16550a0]: printing thread started [ 0.780269] Loading compiled-in X.509 certificates [ 0.785930] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [ 0.786029] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [ 0.788319] ti-sci 44083000.dmsc: ABI: 3.1 (firmware rev 0x0008 '8.4.1–v08.)[ 0.853935] davinci-mcasp 2ba0000.mcasp: IRQ common not found [ 0.855941] omap_i2c 40b00000.i2c: bus 0 rev0.12 at 100 kHz [ 0.858669] omap_i2c 40b10000.i2c: bus 1 rev0.12 at 100 kHz [ 0.859080] omap_i2c 42120000.i2c: bus 2 rev0.12 at 100 kHz [ 0.859913] pca953x 3-0020: supply vcc not found, using dummy regulator [ 0.859975] pca953x 3-0020: using no AI [ 0.883298] pca953x 3-0022: supply vcc not found, using dummy regulator [ 0.883357] pca953x 3-0022: using AI [ 0.883983] gpio-481 (MCASP/TRACE_MUX_S0): hogged as output/low [ 0.884178] gpio-482 (MCASP/TRACE_MUX_S1): hogged as output/high [ 0.884540] omap_i2c 2000000.i2c: bus 3 rev0.12 at 400 kHz [ 0.885505] omap_i2c 2010000.i2c: bus 4 rev0.12 at 400 kHz [ 0.885969] omap_i2c 2020000.i2c: bus 5 rev0.12 at 100 kHz [ 0.886678] pca953x 6-0020: supply vcc not found, using dummy regulator [ 0.886735] pca953x 6-0020: using no AI [ 0.911190] omap_i2c 2030000.i2c: bus 6 rev0.12 at 400 kHz [ 0.911697] omap_i2c 2040000.i2c: bus 7 rev0.12 at 100 kHz [ 0.912089] omap_i2c 2050000.i2c: bus 8 rev0.12 at 100 kHz [ 0.912805] pca953x 9-0020: supply vcc not found, using dummy regulator [ 0.912874] pca953x 9-0020: using no AI [ 0.934813] omap_i2c 2060000.i2c: bus 9 rev0.12 at 400 kHz [ 0.935655] ti-sci-intr bus@100000:bus@28380000:interrupt-controller2: Interd[ 0.935762] ti-sci-intr bus@100000:interrupt-controller0: Interrupt Router 1d[ 0.935857] ti-sci-intr bus@100000:main-navss:interrupt-controller1: Interrud[ 0.936133] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator d[ 0.951117] j721e-pcie 2900000.pcie: host bridge /bus@100000/pcie@2900000 ra:[ 0.951138] j721e-pcie 2900000.pcie: IO 0x0010001000..0x0010010fff -> 0[ 0.951150] j721e-pcie 2900000.pcie: MEM 0x0010011000..0x0017ffffff -> 0[ 0.951160] j721e-pcie 2900000.pcie: IB MEM 0x0000000000..0xffffffffffff -0[ 1.962158] j721e-pcie 2900000.pcie: PCI host bridge to bus 0000:00 [ 1.962165] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.962170] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus addr)[ 1.962173] pci_bus 0000:00: root bus resource [mem 0x10011000-0x17ffffff] [ 1.962206] pci 0000:00:00.0: [104c:b00d] type 01 class 0x060400 [ 1.962210] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 s[ 1.962316] pci 0000:00:00.0: supports D1 [ 1.962319] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 1.962337] pci 0000:00:00.0: reg 0x224: [mem 0x00000000-0x003fffff 64bit] [ 1.962341] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x00000000-0x00ffffff 6)[ 1.964207] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reg[ 1.965801] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.965819] pci 0000:00:00.0: BAR 7: assigned [mem 0x10400000-0x113fffff 64b][ 1.965826] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.966198] pcieport 0000:00:00.0: PME: Signaling with IRQ 61 [ 1.966822] j721e-pcie 2910000.pcie: host bridge /bus@100000/pcie@2910000 ra:[ 1.966844] j721e-pcie 2910000.pcie: IO 0x0018001000..0x0018010fff -> 0[ 1.966854] j721e-pcie 2910000.pcie: MEM 0x0018011000..0x001fffffff -> 0[ 1.966865] j721e-pcie 2910000.pcie: IB MEM 0x0000000000..0xffffffffffff -0[ 2.969857] j721e-pcie 2910000.pcie: PCI host bridge to bus 0001:00 [ 2.969863] pci_bus 0001:00: root bus resource [bus 00-ff] [ 2.969867] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus ad)[ 2.969870] pci_bus 0001:00: root bus resource [mem 0x18011000-0x1fffffff] [ 2.969893] pci 0001:00:00.0: [104c:b00d] type 01 class 0x060400 [ 2.969897] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 s[ 2.969964] pci 0001:00:00.0: supports D1 [ 2.969966] pci 0001:00:00.0: PME# supported from D0 D1 D3hot [ 2.971769] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reg[ 2.973361] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.973373] pci 0001:00:00.0: PCI bridge to [bus 01] [ 2.973736] pcieport 0001:00:00.0: PME: Signaling with IRQ 64 [ 2.974352] j721e-pcie 2920000.pcie: host bridge /bus@100000/pcie@2920000 ra:[ 2.974371] j721e-pcie 2920000.pcie: IO 0x4400001000..0x4400010fff -> 0[ 2.974382] j721e-pcie 2920000.pcie: MEM 0x4400011000..0x4407ffffff -> 0[ 2.974392] j721e-pcie 2920000.pcie: IB MEM 0x0000000000..0xffffffffffff -0[ 3.977543] j721e-pcie 2920000.pcie: PCI host bridge to bus 0002:00 [ 3.77548] pci_bus 0002:00: root bus resource [bus 00-ff] [ 3.977553] pci_bus 0002:00: root bus resource [io 0x20000-0x2ffff] (bus ad)[ 3.990584] printk: console [ttyS2]: printing thread started [ 3.977557] pci_bus 0002:00: root bus resource [mem 0x4400011000-0x4407fffff)[ 3.994471] printk: console [ttyS2] enabled [ 3.994473] printk: bootconsole [ns16550a0] disabled [ 4.016243] printk: bootconsole [ns16550a0]: printing thread stopped [ 4.016746] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 34, base_baud = 30[ 4.017156] 2840000.serial: ttyS6 at MMIO 0x2840000 (irq = 35, base_baud = 30[ 4.019570] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vdd[ 4.019578] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vcd[ 4.019581] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vcd[ 4.019584] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vcd[ 4.030497] scsi host0: ufshcd [ 4.049727] cdns-ufshcd 4e84000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[10[ 4.073777] cdns-ufshcd 4e84000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[32[ 4.073808] cdns-ufshcd 4e84000.ufs: ufshcd_find_max_sup_active_icc_level: R0[ 4.073967] scsi 0:0:0:49488: Well-known LUN TOSHIBA THGAF8G8T23BAILB 036[ 4.074479] scsi 0:0:0:49476: Well-known LUN TOSHIBA THGAF8G8T23BAILB 036[ 4.074822] cdns-ufshcd 4e84000.ufs: ufshcd_scsi_add_wlus: BOOT WLUN not foud[ 4.078469] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 0[ 4.079774] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, dri7[ 4.079831] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss ve0[ 4.081209] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010a, freq:200000000, ad0[ 4.182724] davinci-mcasp 2ba0000.mcasp: IRQ common not found [ 4.182933] mmc0: CQHCI version 5.10 [ 4.197525] vdd_mmc1: supplied by vsys_3v3 [ 4.198384] pca953x 4-0020: supply vcc not found, using dummy regulator [ 4.198481] pca953x 4-0020: using no AI [ 4.223516] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc7100 [ 4.223861] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc7100 [ 4.224191] omap-mailbox 31f82000.mailbox: omap mailbox rev 0x66fc7100 [ 4.224517] omap-mailbox 31f83000.mailbox: omap mailbox rev 0x66fc7100 [ 4.224818] omap-mailbox 31f84000.mailbox: omap mailbox rev 0x66fc7100 [ 4.229404] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan:)[ 4.231860] ti-udma 31150000.dma-controller: Channels: 122 (tchan: 61, rchan)[ 4.234517] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 6t[ 4.243932] spi-nor spi0.0: mt35xu512aba (65536 Kbytes) [ 4.243951] 8 cmdlinepart partitions found on MTD device 47040000.spi.0 [ 4.243954] Creating 8 MTD partitions on "47040000.spi.0": [ 4.243957] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 4.247439] 0x000000080000-0x000000280000 : "ospi.tispl" [ 4.248525] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 4.249639] 0x000000680000-0x0000006c0000 : "ospi.env" [ 4.250696] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw" [ 4.254853] 0x0000007c0000-0x000000800000 : "ospi.env.backup" [ 4.255286] 0x000000800000-0x000003fc0000 : "ospi.rootfs" [ 4.255731] 0x000003fc0000-0x000004000000 : "ospi.phypattern" [ 4.260609] spi-nor spi1.0: mt25qu512a (65536 Kbytes) [ 4.298456] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 0[ 4.299670] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, dri7[ 4.299718] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss ve0[ 4.300746] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 [ 4.301314] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 14[ 4.301317] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 [ 4.301769] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010a, freq:50000[ 4.303432] davinci-mcasp 2ba0000.mcasp: IRQ common not found [ 4.303998] mmc1: CQHCI version 5.10 [ 4.318232] debugfs: Directory 'pd:27' with parent 'pm_genpd' already presen![ 4.318267] debugfs: Directory 'pd:26' with parent 'pm_genpd' already presen![ 4.319699] debugfs: Directory 'pd:242' with parent 'pm_genpd' already prese![ 4.319739] debugfs: Directory 'pd:241' with parent 'pm_genpd' already prese![ 4.319758] debugfs: Directory 'pd:240' with parent 'pm_genpd' already prese![ 4.319777] debugfs: Directory 'pd:239' with parent 'pm_genpd' already prese![ 4.321125] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 4.338019] ALSA device list: [ 4.338025] No soundcards found. [ 4.366146] mmc0: Command Queue Engine enabled [ 4.366157] mmc0: new HS200 MMC card at address 0001 [ 4.379190] mmcblk0: mmc0:0001 S0J56X 14.8 GiB [ 4.379306] mmcblk0boot0: mmc0:0001 S0J56X partition 1 31.5 MiB [ 4.379417] mmcblk0boot1: mmc0:0001 S0J56X partition 2 31.5 MiB [ 4.385910] mmcblk0rpmb: mmc0:0001 S0J56X partition 3 4.00 MiB, chardev (237)[ 5.375092] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 6t[ 5.375370] Waiting for root device PARTUUID=77357610-02… [ 5.429358] mmc1: new ultra high speed DDR50 SDHC card at address aaaa [ 5.429739] mmcblk1: mmc1:aaaa SD32G 29.7 GiB [ 5.430898] mmcblk1: p1 p2 [ 5.461546] EXT4-fs (mmcblk1p2): recovery complete [ 5.461560] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. )[ 5.461595] VFS: Mounted root (ext4 filesystem) on device 179:98. [ 5.466787] devtmpfs: mounted [ 5.467689] Freeing unused kernel memory: 1728K [ 5.470568] Run /sbin/init as init process [ 5.657207] systemd[1]: System time before build time, advancing clock. [ 5.709367] NET: Registered protocol family 10 [ 5.709963] Segment Routing with IPv6 [ 5.735224] systemd[1]: systemd 244.5+ running in system mode. (+PAM -AUDIT )[ 5.735430] systemd[1]: Detected architecture arm64. Welcome to Arago 2021.09! [ 5.787155] systemd[1]: Set hostname to <j7-evm>. [ 6.004620] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= r.[ OK ] Created slice system-getty.slice 6.063293] random: systemd: uniniti)m. [ 6.063423] systemd[1]: system-getty.slice: unit configures an IP firewall, .[ 6.063430] systemd[1]: (This warning is only shown for the first unit using)[ 6.065035] systemd[1]: Created slice system-getty.slice. [ 6.098725] random: systemd: uninitialized urandom read (16 bytes read) [ 6.099555] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Created slice User and Session Slic[ 6.134544] random: systemd: uni)e. [ 6.135216] systemd[1]: Created slice User and Session Slice. [ OK ] Started Dispatch Password ��…ts to [ 6.158674] systemd[1]: Started .Console Directory Watch. [ OK ] Started Forward Password R��…uests [ 6.182616] systemd[1]: Started .to Wall Directory Watch. [ OK ] Reached target Paths.[ 6.206600] systemd[1]: Reached target Paths. [ OK ] Reached target Remote File Systems 6.226528] systemd[1]: Reached tar.[0m. [ OK ] Reached target Slices.[ 6.246513] systemd[1]: Reached target Slices. [ OK ] Reached target Swap. [ 6.266524] systemd[1]: Reached target Swap. [ OK ] Listening on RPCbind Server Activat[ 7.326681] systemd[1]: Listenin.ion Socket. [ OK ] Reached target RPC Port Mapper.[ 7.350538] urandom_read_iter: 7 cald [ 7.350543] random: systemd: uninitialized urandom read (16 bytes read) [ 7.350573] systemd[1]: Reached target RPC Port Mapper. [ 7.373291] random: systemd: uninitialized urandom read (16 bytes read) [ 7.375741] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ OK ] Listening on initctl Compatibility [ 7.402526] random: systemd: uni)Named Pipe. [ 7.402694] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on Journal Socket (/dev/l[ 7.435234] systemd[1]: Conditio.og). [ 7.435635] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket.[ 7.458823] systemd[1]: Listening on Jo. [ OK ] Listening on Network Service Netlin[ 7.478853] systemd[1]: Listenin.k Socket. [ 7.506409] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ OK ] Listening on udev Kernel Socket[ 7.526708] systemd[1]: Listening on.. Mounting Huge Pages File System… [ 7.549121] systemd[1]: Mounting Huge Pages File System… [ 7.562313] systemd[1]: Mounting POSIX Message Queue File System… Mounting POSIX Message Queue File System… Mounting Kernel Debug File System… [ 7.588999] systemd[1]: Mounting Kernel Debug File System… Mounting Temporary Directory (/tmp)… [ 7.603245] systemd[1]: Mounting Temporary Directory (/tmp)… Starting Create list of st��…odes for the curr[ 7.617356] systemd[1.ent kernel… Starting Start psplash boot splash screen.[ 7.644834] systemd[1]: S… Starting RPC Bind… [ 7.669244] systemd[1]: Starting RPC Bind… Starting Journal Service…[ 7.678696] systemd[1]: Condition check . [ 7.681929] systemd[1]: Starting Journal Service… Starting Load Kernel Modules… [ 7.719346] systemd[1]: Starting Load Kernel Modules… Starting Remount Root and Kernel File Systems 7.733157] systemd[1]: .[0m… [ 7.754401] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 7.760006] cryptodev: loading out-of-tree module taints kernel. [ 7.763094] systemd[1]: Starting udev Coldplug all Devices… Starting udev Coldplug all Devices… [ 7.763188] cryptodev: driver 1.10 loaded. [ OK ] Started RPC Bind. [ 7.790546] systemd[1]: Started RPC Bind. [ OK ] Started Journal Service. [ 7.802923] systemd[1]: Started Journal Service. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Started Create list of sta��… nodes for the current kernel. [FAILED] Failed to start Start psplash boot splash screen. See 'systemctl status psplash-start.service' for details. [DEPEND] Dependency failed for Star��…progress communication helper. [ OK ] Started Load Kernel Modules. [ OK ] Started Remount Root and Kernel File Systems. Mounting Kernel Configuration File System… Starting Flush Journal to Persistent Storage 9.039536] urandom_readd[ 9.039550] random: systemd: uninitialized urandom read (16 bytes read) 0m… [ 9.046706] random: systemd-journal: uninitialized urandom read (16 bytes re)[ 9.050165] systemd-journald[212]: Received client request to flush runtime . Starting Apply Kernel Variables… [ 9.075500] random: systemd: uninitialized urandom read (16 bytes read) Starting Create Static Device Nodes in /dev… [ OK ] Started udev Coldplug all Devices. [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram… Mounting /var/volatile… Starting udev Wait for Complete Device Initialization… Starting udev Kernel Device Manager… [ OK ] Mounted /media/ram. [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed… [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories… [ OK ] Started Create Volatile Files and Directories. [ OK ] Started udev Kernel Device Manager. Starting Network Time Synchronization… Starting Update UTMP about System Boot/Shutdown… [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Set. [ OK ] Reached target System Time Synchronized. [ 9.722234] CAN device driver interface [ 10.990465] random: crng init done [ 10.990473] random: 31 urandom warning(s) missed due to ratelimiting [ 11.175023] k3-dsp-rproc 4d80800000.dsp: assigned rese [ 11.175023] k3-dsp-rproc 4d80800000.dsp: assigned reserved memory node c66-d0 [ 11.177800] pvrsrvkm 4e20000000.gpu: More than one power domain for this GPUs [ 11.183252] k3-dsp-rproc 4d80800000.dsp: configured DSP for IPC-only mode [ 11.183297] remoteproc remoteproc0: 4d80800000.dsp is available [ 11.183404] remoteproc remoteproc0: attaching to 4d80800000.dsp [ 11.183441] Unable to handle kernel paging request at virtual address ffff80brved memory node [ 11.230931] PVR_K: 246: Read BVNC 22.104.208.318 from HW device registers c66-dma-mem [ 11.238924] [drm] Initialized tidss 1.0.0 20180215 for 4a00000.dss on minor 0ory@a7000000 [ 11.247672] printk: console [ttyS2]: printing thread stopped [ 11.248626] tidss 4a00000.dss: [drm] Cannot find any crtc or sizes [ 11.258402] Mem abort info: [ 11.262457] ESR = 0x96000006 [ 11.265542] EC = 0x25: DABT (current EL), IL = 32 bits [ 11.269707] PVR_K: 246: RGX Device registered with BVNC 22.104.208.318 [ 11.270896] SET = 0, FnV = 0 [ 11.281966] EA = 0, S1PTW = 0 [ 11.285346] Data abort info: [ 11.288914] ISV = 0, ISS = 0x00000006 [ 11.292916] CM = 0, WnR = 0 [ 11.297005] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000082e96000 [ OK ] Started Load/Save Random Seed.[ 11.304164] [ffff800018fffffb] pgd=000[ 11.304875] tidss 4a00000.dss: [drm] Cannot find any crtc or sizes [ 11.319946] Internal error: Oops: 96000006 [#1] PREEMPT_RT SMP [ 11.331747] Modules linked in: sa2ul(+) videobuf2_v4l2 snd_soc_pcm3168a_i2c 6[ 11.354214] [drm] Initialized pvr 1.15.6133109 20170530 for 4e20000000.gpu o1[ 11.358808] CPU: 1 PID: 237 Comm: systemd-udevd Tainted: G O 1[ 11.376068] Hardware name: Texas Instruments K3 J721E SoC (DT) [ 11.381885] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=–) [ 11.387877] pc : rproc_handle_resources.constprop.0+0x94/0x168 [ 11.393709] lr : rproc_boot+0x334/0x670 [ 11.397534] sp : ffff8000122537c0 [ 11.400833] x29: ffff8000122537c0 x28: ffff8000111d14d0 [ 11.406129] x27: ffff00087f84b138 x26: fffffffffffffffb [ 11.411427] x25: ffff800019000000 x24: ffff800010dd1d28 [ 11.416722] x23: ffff00080525f038 x22: 0000000000000000 [ 11.422018] x21: ffff80001114f010 x20: ffff00080525f000 [ 11.427312] x19: 0000000000000000 x18: ffff8000111c3000 [ 11.432609] x17: 0000000000000000 x16: 0000000000000000 [ 11.437904] x15: ffff000802f23b00 x14: ffffffffffffffff [ 11.443200] x13: ffffffffffffffff x12: ffffffffffcfffff [ 11.448495] x11: ffffffffffffffff x10: fffffffeffffffff [ 11.453792] x9 : ffffffffefffffff x8 : f7ffffffffffffff [ 11.459087] x7 : bffffffbfcffffff x6 : ffff000805235b00 [ 11.464382] x5 : ffff00087f7dab38 x4 : 0000000000000000 [ 11.469678] x3 : 0000000000000101 x2 : 00000000fffffffb [ 11.474974] x1 : ffff800018ffffff x0 : ffff800019000000 [ 11.480270] Call trace: [ 11.482704] rproc_handle_resources.constprop.0+0x94/0x168 [ 11.488178] rproc_boot+0x334/0x670 [ 11.491654] rproc_add+0x88/0x168 [ 11.494954] k3_dsp_rproc_probe+0x710/0x850 [ti_k3_dsp_remoteproc] [ 11.501123] platform_drv_probe+0x54/0xa8 [ 11.505120] really_probe+0xec/0x3e0 [ 11.508683] driver_probe_device+0x58/0xb8 [ 11.512765] device_driver_attach+0x74/0x80 [ 11.516933] __driver_attach+0x58/0xe0 [ 11.520669] bus_for_each_dev+0x70/0xc0 [ 11.524491] driver_attach+0x24/0x30 [ 11.528053] bus_add_driver+0x14c/0x200 [ 11.531874] driver_register+0x64/0x120 [ 11.535695] __platform_driver_register+0x48/0x58 [ 11.540384] k3_dsp_rproc_driver_init+0x20/0x1000 [ti_k3_dsp_remoteproc] [ 11.547067] do_one_initcall+0x54/0x1b8 [ 11.550889] do_init_module+0x44/0x1f0 [ 11.554625] load_module+0x1f58/0x2510 [ 11.558360] __do_sys_finit_module+0xb8/0xf8 [ 11.562614] __arm64_sys_finit_module+0x20/0x30 [ 11.567129] el0_svc_common.constprop.0+0x78/0x1c8 [ 11.571907] do_el0_svc+0x24/0x90 [ 11.575209] el0_svc+0x14/0x20 [ 11.578250] el0_sync_handler+0xb0/0xb8 [ 11.582070] el0_sync+0x180/0x1c0 [ 11.585376] Code: 128002b3 9133c021 97ffeba8 1400002e (b87a6b20) [ 11.591453] —[ end trace 0000000000000002 ]— [ 11.609753] platform 41000000.r5f: R5F core may have been powered on by a di)[ 11.663951] platform 41000000.r5f: configured R5F for IPC-only mode [ 11.672556] platform 41000000.r5f: assigned reserved memory node r5f-dma-mem0[ 11.686594] remoteproc remoteproc1: 41000000.r5f is available [ 11.694603] remoteproc remoteproc1: attaching to 41000000.r5f [ 11.711182] platform 41000000.r5f: R5F core initialized in IPC-only mode [ 11.718168] remoteproc1#vdev0buffer: assigned reserved memory node r5f-dma-0[ 11.756884] virtio_rpmsg_bus virtio0: rpmsg host is online [ 11.762928] remoteproc1#vdev0buffer: registered virtio0 (type 7) [ 11.772395] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addd[ 11.772947] remoteproc remoteproc1: remote processor 41000000.r5f is now attd[ 11.786593] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [ 11.834121] platform 5c00000.r5f: configured R5F for IPC-only mode [ 11.841114] platform 5c00000.r5f: assigned reserved memory node r5f-dma-memo0[ 11.850532] remoteproc remoteproc2: 5c00000.r5f is available [ 11.863028] remoteproc remoteproc2: attaching to 5c00000.r5f [ 11.895918] platform 5c00000.r5f: R5F core initialized in IPC-only mode [ 11.912355] remoteproc2#vdev0buffer: assigned reserved memory node r5f-dma-0[ 11.950940] virtio_rpmsg_bus virtio1: rpmsg host is online [ 11.966061] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xd [ 11.985386] remoteproc2#vdev0buffer: registered virtio1 (type 7) [ 11.993538] remoteproc remoteproc2: remote processor 5c00000.r5f is now attad[ 12.006557] platform 5d00000.r5f: configured R5F for IPC-only mode [ 12.034995] platform 5d00000.r5f: assigned reserved memory node r5f-dma-memo0[ 12.050284] remoteproc remoteproc3: 5d00000.r5f is available [ 12.056912] remoteproc remoteproc3: attaching to 5d00000.r5f [ 12.063422] platform 5d00000.r5f: R5F core initialized in IPC-only mode [ 12.103080] remoteproc remoteproc3: remote processor 5d00000.r5f is now attad[ 12.116245] platform 5e00000.r5f: configured R5F for remoteproc mode [ 12.123189] platform 5e00000.r5f: assigned reserved memory node r5f-dma-memo0[ 12.132721] remoteproc remoteproc4: 5e00000.r5f is available [ 12.143428] remoteproc remoteproc4: Direct firmware load for j7-main-r5f1_0-2[ 12.153041] remoteproc remoteproc4: powering up 5e00000.r5f [ 12.159943] platform 5f00000.r5f: configured R5F for remoteproc mode [ 12.166548] remoteproc remoteproc4: Direct firmware load for j7-main-r5f1_0-2[ 12.177484] remoteproc remoteproc4: request_firmware failed: -2 [ 12.184637] platform 5f00000.r5f: assigned reserved memory node r5f-dma-memo0[ 12.195845] remoteproc remoteproc5: 5f00000.r5f is available [ 12.205549] remoteproc remoteproc5: Direct firmware load for j7-main-r5f1_1-2[ 12.214821] remoteproc remoteproc5: powering up 5f00000.r5f [ 12.222731] remoteproc remoteproc5: Direct firmware load for j7-main-r5f1_1-2[ 12.231906] remoteproc remoteproc5: request_firmware failed: -2 [ 12.695733] img_enc 4200000.video-encoder: vxe_enc_probe: using heap 1 for ic[ 12.763898] img_enc 4200000.video-encoder: encoder registered as /dev/video0 [ 12.813529] img_dec 4300000.video-decoder: decoder registered as /dev/video1 [ 14.252730] m_can_platform 40528000.can: m_can device registered (irq=23, ve)[ 14.280088] m_can_platform 40568000.can: m_can device registered (irq=25, ve)[ 14.293251] m_can_platform 2701000.can: m_can device registered (irq=55, ver)[ 14.305803] m_can_platform 2721000.can: m_can device registered (irq=57, ver)[ 14.593640] remoteproc remoteproc6: b034000.pru is available [ 14.605638] usbcore: registered new interface driver usbfs [ 14.698776] remoteproc remoteproc7: b004000.rtu is available [ 14.714612] usbcore: registered new interface driver hub [ 14.770921] remoteproc remoteproc8: b00a000.txpru is available [ 14.777754] usbcore: registered new device driver usb [ 14.788654] remoteproc remoteproc9: b038000.pru is available [ 14.799453] remoteproc remoteproc10: b006000.rtu is available [ 14.812644] remoteproc remoteproc11: b00c000.txpru is available [ 14.819561] remoteproc remoteproc12: b134000.pru is available [ 14.822580] omap_rng 4e10000.rng: Random Number Generator ver. 241b34c [ 14.829675] remoteproc remoteproc13: b104000.rtu is available [ 14.839038] remoteproc remoteproc14: b10a000.txpru is available [ 14.847395] remoteproc remoteproc15: b138000.pru is available [ 14.854096] remoteproc remoteproc16: b106000.rtu is available [ 14.865206] remoteproc remoteproc17: b10c000.txpru is available [ OK ] Created slice system-systemd\x2dfsck.slice. [ 15.106129] cdns-csi2rx: probe of 4504000.csi-bridge failed with error -22 Starting Start psplash boot splash screen… [FAILED] Failed to start Start psplash boot splash screen. See 'systemctl status psplash-start.service' for details. [DEPEND] Dependency failed for Star��…progress communication helper. [ 15.185004] cdns-csi2rx: probe of 4514000.csi-bridge failed with error -22 [ OK ] Found device /dev/mmcblk1p1. Starting File System Check on /dev/mmcblk1p1… [ 16.435528] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 16.441093] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus n1[ 16.448960] xhci-hcd xhci-hcd.2.auto: hcc params 0x200073c9 hci version 0x100[ 16.458621] xhci-hcd xhci-hcd.2.auto: irq 663, io mem 0x06410000 [ 16.464977] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, b0[ 16.473364] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1[ 16.480620] usb usb1: Product: xHCI Host Controller [ 16.485545] usb usb1: Manufacturer: Linux 5.10.120-rt70-gadb96c641c xhci-hcd [ 16.492612] usb usb1: SerialNumber: xhci-hcd.2.auto [ 16.497873] hub 1-0:1.0: USB hub found [ 16.501758] hub 1-0:1.0: 1 port detected [ 16.506834] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 16.512395] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus n2[ 16.520090] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 16.526735] usb usb2: We don't know the algorithms for LPM for this host, di.[ 16.534916] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, b0[ 16.543211] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1[ 16.550471] usb usb2: Product: xHCI Host Controller [ 16.555374] usb usb2: Manufacturer: Linux 5.10.120-rt70-gadb96c641c xhci-hcd [ 16.562478] usb usb2: SerialNumber: xhci-hcd.2.auto [ 16.567742] hub 2-0:1.0: USB hub found [ 16.571588] hub 2-0:1.0: 1 port detected [ OK ] Started File System Check on /dev/mmcblk1p1. Mounting /run/media/mmcblk1p1… [ OK ] Mounted /run/media/mmcblk1p1. [ 16.758466] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 16.910765] usb 1-1: New USB device found, idVendor=0451, idProduct=8142, bc0[ 16.918939] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1[ 16.926072] usb 1-1: SerialNumber: 81000869A119 [ 16.931351] hub 1-1:1.0: USB hub found [ 16.935156] hub 1-1:1.0: 4 ports detected [FAILED] Failed to start udev Wait ��…omplete Device Initialization.See 'systemctl status systemd-udev-settle.service' for details. [ OK ] Started Hardware RNG Entropy Gatherer Daemon. [ OK ] Reached target System Initialization. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Docker Socket for the API. [ OK ] Listening on dropbear.socket. Starting Reboot and dump vmcore via kexec… [ OK ] Listening on Docker Socket for the API. [ OK ] Started Reboot and dump vmcore via kexec. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Save/Restore Sound Card State… [ OK ] Started Job spooling tools. [ OK ] Started Periodic Command Scheduler. [ OK ] Started D-Bus System Message Bus. Starting Print notice about GPLv3 packages… Starting set host name as per compatible name… Starting IPv6 Packet Filtering Framework… Starting IPv4 Packet Filtering Framework… [ OK ] Started irqbalance daemon. Starting Telephony service… Starting Update pmic regis��…fety feature on power rails… Starting rc.pvr.service… Starting startwlanap… Starting startwlansta… Starting Login Service… [ OK ] Started TEE Supplicant. Starting Update weston ini��… based on the platform name… [ OK ] Started Save/Restore Sound Card State. [ OK ] Started IPv6 Packet Filtering Framework. [ OK ] Started IPv4 Packet Filtering Framework. [ OK ] Started Update pmic regist��…safety feature on power rails. [ OKE/TC:0 0 std_entry_with_parg:234 Bad arg address 0x888cd5000 ] Started startwlansta. [ OK ] Reached target Network (Pre). [ OK ] Reached target Sound Card. Starting Network Service… [ OK ] Started Telephony service. [ OK ] Started startwlanap. [ OK ] Started Update weston ini ��…ge based on the platform name. [ OK ] Started set host name as per compatible name. [ 130.993591] Bluetooth: Core ver 2.22 [ 131.003637] NET: Registered protocol family 31 [ 131.010483] Bluetooth: HCI device and connection manager initialized [ 131.022533] Bluetooth: HCI socket layer initialized [ 131.030500] Bluetooth: L2CAP socket layer initialized [ 131.038546] Bluetooth: SCO socket layer initialized [ OK ] Started Network Service. Starting Wait for Network to be Configured… Starting Network Name Resolution… [ 131.213213] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] dr)[ 131.237153] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmiie[ OK ] Listening on Load/Save RF ��…itch Status /dev/rfkill Watch. [ OK ] Started Login Service. [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. Starting Avahi mDNS/DNS-SD Stack… Starting Enable and configure wl18xx bluetooth stack… [ OK ] Started NFS status monitor for NFSv2/3 locking.. Starting Simple Network Ma��…ent Protocol (SNMP) Daemon…. Starting Permit User Sessions… [ OK ] Started Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Started Serial Getty on ttyS3. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks… [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Enable and configure wl18xx bluetooth stack. [ OK ] Started rc.pvr.service. Starting weston.service… [ OK ] Started weston.service. Starting DEMO… Starting telnetd.service… [ OK ] Started DEMO. [ OK ] Started telnetd.service. [ OK ] Started Simple Network Man��…ement Protocol (SNMP) Daemon.. [ 132.265268] PVR_K: 1084: RGX Firmware image 'rgx.fw.22.104.208.318' loaded [ 132.289404] PVR_K: 1084: Shader binary image 'rgx.sh.22.104.208.318' loaded *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf bash-dev bash bc binutils cifs-utils coreutils-stdbuf coreutils cpio cpp-symlinks cpp dosfstools elfutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbserver gettext glmark2 gstreamer1.0-libav-dev gstreamer1.0-libav gzip less libasm1 libbfd libdw1 libelf1 libgdbm-compat4 libgdbm-dev libgdbm6 libgettextlib libgettextsrc libgmp-dev libgmp10 libgmpxx4 libidn2-0 libidn2-dev libmpc3 libmpfr6 libreadline-dev libreadline8 libunistring-dev libunistring2 m4-dev m4 make nettle-dev nettle parted python3-rfc3987 python3-strict-rfc3339 tar which zeromq If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove <package> Where <package> is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the –force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project j7-evm ttyS2 Arago 2021.09 j7-evm ttyS2 j7-evm login: root root@j7-evm:~# cd /opt/vision_apps root@j7-evm:/opt/vision_apps# source ./vision_apps_init.sh root@j7-evm:/opt/vision_apps# APP_LOG: ERROR: Unable to map memory @ 0xb2000000!

,

??? ?：

我按照另外一个帖子说的 把卡格式化再重新制作拷贝，还是会报错  

U-Boot 2021.01-ga169f42610 (Aug 31 2022 – 12:57:57 +0000) SoC: J721E SR1.1 GP Model: Texas Instruments K3 J721E SoC Board: J721EX-PM2-SOM rev A DRAM: 4 GiB Flash: 0 Bytes MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1 Loading Environment from FAT… OK In: serial@2800000 Out: serial@2800000 Err: serial@2800000 am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA0Detected: J7X-BASE-CPB rev A Detected: J7X-VSC8514-ETH rev E2 cdns,sierra serdes@5000000: sierra probed Net: eth0: ethernet@46000000port@1 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 Failed to load 'boot.scr' 483 bytes read in 8 ms (58.6 KiB/s) Loaded env from uEnv.txt Importing environment from mmc1 … Running uenvcmd … 1 bytes read in 9 ms (0 Bytes/s) Already setup. gpio: pin gpio@22_17 (gpio 281) value is 1 gpio: pin gpio@22_16 (gpio 280) value is 0 k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work k3_r5f_rproc r5f@41400000: Core 2 is already in use. No rproc commands work 1383860 bytes read in 68 ms (19.4 MiB/s) Load Remote Processor 2 with data@addr=0x82000000 1383860 bytes: Success! 302028 bytes read in 23 ms (12.5 MiB/s) Load Remote Processor 3 with data@addr=0x82000000 302028 bytes: Success! Failed to load '/lib/firmware/j7-main-r5f1_0-fw' Failed to load '/lib/firmware/j7-main-r5f1_1-fw' 1469172 bytes read in 71 ms (19.7 MiB/s) Load Remote Processor 6 with data@addr=0x82000000 1469172 bytes: Success! 1469172 bytes read in 71 ms (19.7 MiB/s) Load Remote Processor 7 with data@addr=0x82000000 1469172 bytes: Success! 12980176 bytes read in 218 ms (56.8 MiB/s) Load Remote Processor 8 with data@addr=0x82000000 12980176 bytes: Success! 18303488 bytes read in 765 ms (22.8 MiB/s) 104096 bytes read in 13 ms (7.6 MiB/s) Failed to load '/boot/k3-j721e-vision-apps.dtbo' ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 000000008fee3000, end 000000008fffffff … OK Starting kernel … [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] [ 0.000000] Linux version 5.10.120-rt70-gadb96c641c (oe-user@oe-host) (aarch2[ 0.000000] Machine model: Texas Instruments K3 J721E SoC [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, B[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, B[ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, B[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, B[ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, B[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, B[ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, B[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, B[ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, B[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, B[ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, B[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, B[ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, B[ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a6000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, B[ 0.000000] OF: reserved mem: initialized node c66-memory@a6100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, B[ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a7000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, B[ 0.000000] OF: reserved mem: initialized node c66-memory@a7100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, B[ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, B[ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatibl[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ac000000, B[ 0.000000] OF: reserved mem: initialized node r5f-virtual-eth-queues@ac0000l[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ac200000, B[ 0.000000] OF: reserved mem: initialized node r5f-virtual-eth-buffers@ac200l[ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a8ffffff] [ 0.000000] node 0: [mem 0x00000000a9000000-0x00000000a9ffffff] [ 0.000000] node 0: [mem 0x00000000aa000000-0x00000000abbfffff] [ 0.000000] node 0: [mem 0x00000000abc00000-0x00000000abffffff] [ 0.000000] node 0: [mem 0x00000000ac000000-0x00000000adffffff] [ 0.000000] node 0: [mem 0x00000000ae000000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff] [ 0.000000] On node 0 totalpages: 1048576 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 524288 pages, LIFO batch:63 [ 0.000000] Normal zone: 8192 pages used for memmap [ 0.000000] Normal zone: 524288 pages, LIFO batch:63 [ 0.000000] cma: Reserved 512 MiB at 0x00000000e0000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 18 pages/cpu s35008 r8192 d30528 u73728 [ 0.000000] pcpu-alloc: s35008 r8192 d30528 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmt[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 byte)[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes,)[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000dc000000-0x00000000e00000)[ 0.000000] Memory: 3272148K/4194304K available (10688K kernel code, 1170K r)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.000000] No expedited grace period (rcu_normal_after_boot). [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 ji.[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->9[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (fla)[ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000880030000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000088004000[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless[ 0.000000] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398s[ 0.008388] Console: colour dummy device 80×25 [ 0.012954] Calibrating delay loop (skipped), value calculated using timer f)[ 0.023623] pid_max: default: 32768 minimum: 301 [ 0.028381] LSM: Security Framework initializing [ 0.033133] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, lin)[ 0.040710] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)[ 0.049580] rcu: Hierarchical SRCU implementation. [ 0.054765] Platform MSI: msi-controller@1820000 domain created [ 0.061021] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controllerd[ 0.070332] EFI services will not be available. [ 0.075072] smp: Bringing up secondary CPUs … I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot [ 0.088414] Detected PIPT I-cache on CPU1 [ 0.092526] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 [ 0.099557] GICv3: CPU1: using allocated LPI pending table @0x000000088005000[ 0.106966] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] [ 0.113697] smp: Brought up 1 node, 2 CPUs [ 0.117892] SMP: Total of 2 processors activated. [ 0.122701] CPU features: detected: 32-bit EL0 Support [ 0.127955] CPU features: detected: CRC32 instructions [ 0.141603] CPU: All CPU(s) started at EL2 [ 0.145799] alternatives: patching kernel code [ 0.150844] devtmpfs: initialized [ 0.160391] KASLR disabled due to lack of seed [ 0.165029] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms[ 0.174992] futex hash table entries: 512 (order: 4, 65536 bytes, linear) [ 0.188479] pinctrl core: initialized pinctrl subsystem [ 0.194140] DMI not present or invalid. [ 0.198410] NET: Registered protocol family 16 [ 0.203670] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.210992] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic alls[ 0.219053] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic as[ 0.227397] thermal_sys: Registered thermal governor 'step_wise' [ 0.227861] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.240959] ASID allocator initialised with 65536 entries [ 0.266394] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.273276] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.280128] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.286985] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.294440] cryptd: max_cpu_qlen set to 1000 [ 0.300573] k3-chipinfo 43000014.chipid: Family:J721E rev:SR2.0 JTAGID[0x1bbd[ 0.309401] vsys_3v3: supplied by evm_12v0 [ 0.313814] vsys_5v0: supplied by evm_12v0 [ 0.318627] iommu: Default domain type: Translated [ 0.323780] SCSI subsystem initialized [ 0.327994] mc: Linux media interface: v0.10 [ 0.332375] videodev: Linux video capture interface: v2.00 [ 0.338015] pps_core: LinuxPPS API ver. 1 registered [ 0.343094] pps_core: Software ver. 5.3.6 – Copyright 2005-2007 Rodolfo Giom>[ 0.352434] PTP clock support registered [ 0.356463] EDAC MC: Ver: 3.0.0 [ 0.360266] FPGA manager framework [ 0.363792] Advanced Linux Sound Architecture Driver Initialized. [ 0.370404] clocksource: Switched to clocksource arch_sys_counter [ 0.376740] VFS: Disk quotas dquot_6.6.0 [ 0.380769] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.390662] NET: Registered protocol family 2 [ 0.395407] IP idents hash table entries: 65536 (order: 7, 524288 bytes, lin)[ 0.404113] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 131)[ 0.413050] TCP established hash table entries: 32768 (order: 6, 262144 byte)[ 0.421288] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes, lin)[ 0.430023] TCP: Hash tables configured (established 32768 bind 32768) [ 0.436966] UDP hash table entries: 2048 (order: 6, 262144 bytes, linear) [ 0.444158] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes, linea)[ 0.451884] NET: Registered protocol family 1 [ 0.456687] RPC: Registered named UNIX socket transport module. [ 0.462751] RPC: Registered udp transport module. [ 0.467554] RPC: Registered tcp transport module. [ 0.472356] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.478940] PCI: CLS 0 bytes, default 64 [ 0.483334] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte[ 0.493834] Initialise system trusted keyrings [ 0.498525] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.507133] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.513459] NFS: Registering the id_resolver key type [ 0.518663] Key type id_resolver registered [ 0.522934] Key type id_legacy registered [ 0.527067] nfs4filelayout_init: NFSv4 File Layout Driver Registering… [ 0.533924] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registerin.[ 0.541611] 9p: Installing v9fs 9p2000 file system support [ 0.566750] Key type asymmetric registered [ 0.570948] Asymmetric key parser 'x509' registered [ 0.575953] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )[ 0.583521] io scheduler mq-deadline registered [ 0.588147] io scheduler kyber registered [ 0.593746] pinctrl-single 4301c000.pinctrl: 94 pins, size 376 [ 0.599950] pinctrl-single 11c000.pinctrl: 173 pins, size 692 [ 0.608475] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [ 0.614771] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [ 0.622782] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.630955] arm-smmu-v3 36600000.iommu: ias 48-bit, oas 48-bit (features 0x0)[ 0.639220] arm-smmu-v3 36600000.iommu: allocated 65536 entries for cmdq [ 0.646303] arm-smmu-v3 36600000.iommu: allocated 32768 entries for evtq [ 0.654929] arm-smmu-v3 36600000.iommu: msi_domain absent – falling back to s[ 0.668401] brd: module loaded [ 0.675659] loop: module loaded [ 0.679317] megasas: 07.714.04.00-rc1 [ 0.685019] tun: Universal TUN/TAP device driver, 1.6 [ 0.690494] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.696903] igbvf: Copyright (c) 2009 – 2012 Intel Corporation. [ 0.702983] sky2: driver version 1.30 [ 0.707295] VFIO – User Level meta-driver version: 0.3 [ 0.713073] i2c /dev entries driver [ 0.717321] sdhci: Secure Digital Host Controller Interface driver [ 0.723646] sdhci: Copyright(c) Pierre Ossman [ 0.728362] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.734839] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping …. [ 0.742076] optee: probing for conduit method. [ 0.746642] optee: revision 3.17 (15a746d2) [ 0.746781] optee: dynamic shared memory is enabled E/TC:0 0 std_entry_with_parg:234 Bad arg address 0x881385000 [ 0.761584] optee: initialized driver [ 0.766701] NET: Registered protocol family 17 [ 0.771334] 9pnet: Installing 9P2000 support [ 0.775741] Key type dns_resolver registered [ 0.780264] printk: bootconsole [ns16550a0]: printing thread started [ 0.780291] Loading compiled-in X.509 certificates [ 0.785929] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [ 0.786034] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [ 0.788250] ti-sci 44083000.dmsc: ABI: 3.1 (firmware rev 0x0008 '8.4.1–v08.)[ 0.853875] davinci-mcasp 2ba0000.mcasp: IRQ common not found [ 0.859839] omap_i2c 40b00000.i2c: bus 0 rev0.12 at 100 kHz [ 0.860250] omap_i2c 40b10000.i2c: bus 1 rev0.12 at 100 kHz [ 0.860650] omap_i2c 42120000.i2c: bus 2 rev0.12 at 100 kHz [ 0.861413] pca953x 3-0020: supply vcc not found, using dummy regulator [ 0.861482] pca953x 3-0020: using no AI [ 0.875290] pca953x 3-0022: supply vcc not found, using dummy regulator [ 0.875340] pca953x 3-0022: using AI [ 0.875960] gpio-481 (MCASP/TRACE_MUX_S0): hogged as output/low [ 0.876153] gpio-482 (MCASP/TRACE_MUX_S1): hogged as output/high [ 0.876514] omap_i2c 2000000.i2c: bus 3 rev0.12 at 400 kHz [ 0.877472] omap_i2c 2010000.i2c: bus 4 rev0.12 at 400 kHz [ 0.877943] omap_i2c 2020000.i2c: bus 5 rev0.12 at 100 kHz [ 0.878658] pca953x 6-0020: supply vcc not found, using dummy regulator [ 0.878720] pca953x 6-0020: using no AI [ 0.903127] omap_i2c 2030000.i2c: bus 6 rev0.12 at 400 kHz [ 0.903648] omap_i2c 2040000.i2c: bus 7 rev0.12 at 100 kHz [ 0.904033] omap_i2c 2050000.i2c: bus 8 rev0.12 at 100 kHz [ 0.904720] pca953x 9-0020: supply vcc not found, using dummy regulator [ 0.904792] pca953x 9-0020: using no AI [ 0.926740] omap_i2c 2060000.i2c: bus 9 rev0.12 at 400 kHz [ 0.927573] ti-sci-intr bus@100000:bus@28380000:interrupt-controller2: Interd[ 0.927693] ti-sci-intr bus@100000:interrupt-controller0: Interrupt Router 1d[ 0.927789] ti-sci-intr bus@100000:main-navss:interrupt-controller1: Interrud[ 0.927967] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator d[ 0.943025] j721e-pcie 2900000.pcie: host bridge /bus@100000/pcie@2900000 ra:[ 0.943049] j721e-pcie 2900000.pcie: IO 0x0010001000..0x0010010fff -> 0[ 0.943060] j721e-pcie 2900000.pcie: MEM 0x0010011000..0x0017ffffff -> 0[ 0.943070] j721e-pcie 2900000.pcie: IB MEM 0x0000000000..0xffffffffffff -0[ 1.954071] j721e-pcie 2900000.pcie: PCI host bridge to bus 0000:00 [ 1.954077] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.954083] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus addr)[ 1.954086] pci_bus 0000:00: root bus resource [mem 0x10011000-0x17ffffff] [ 1.954119] pci 0000:00:00.0: [104c:b00d] type 01 class 0x060400 [ 1.954124] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 s[ 1.954229] pci 0000:00:00.0: supports D1 [ 1.954233] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 1.954251] pci 0000:00:00.0: reg 0x224: [mem 0x00000000-0x003fffff 64bit] [ 1.954255] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x00000000-0x00ffffff 6)[ 1.956145] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reg[ 1.957751] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.957769] pci 0000:00:00.0: BAR 7: assigned [mem 0x10400000-0x113fffff 64b][ 1.957777] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.958143] pcieport 0000:00:00.0: PME: Signaling with IRQ 61 [ 1.958792] j721e-pcie 2910000.pcie: host bridge /bus@100000/pcie@2910000 ra:[ 1.958812] j721e-pcie 2910000.pcie: IO 0x0018001000..0x0018010fff -> 0[ 1.958822] j721e-pcie 2910000.pcie: MEM 0x0018011000..0x001fffffff -> 0[ 1.958831] j721e-pcie 2910000.pcie: IB MEM 0x0000000000..0xffffffffffff -0[ 2.961825] j721e-pcie 2910000.pcie: PCI host bridge to bus 0001:00 [ 2.961830] pci_bus 0001:00: root bus resource [bus 00-ff] [ 2.961835] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus ad)[ 2.961838] pci_bus 0001:00: root bus resource [mem 0x18011000-0x1fffffff] [ 2.961863] pci 0001:00:00.0: [104c:b00d] type 01 class 0x060400 [ 2.961867] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 s[ 2.961934] pci 0001:00:00.0: supports D1 [ 2.961936] pci 0001:00:00.0: PME# supported from D0 D1 D3hot [ 2.963719] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reg[ 2.965305] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.965318] pci 0001:00:00.0: PCI bridge to [bus 01] [ 2.965667] pcieport 0001:00:00.0: PME: Signaling with IRQ 64 [ 2.966290] j721e-pcie 2920000.pcie: host bridge /bus@100000/pcie@2920000 ra:[ 2.966312] j721e-pcie 2920000.pcie: IO 0x4400001000..0x4400010fff -> 0[ 2.966321] j721e-pcie 2920000.pcie: MEM 0x4400011000..0x4407ffffff -> 0[ 2.966331] j721e-pcie 2920000.pcie: IB MEM 0x0000000000..0xffffffffffff -0[ 3.969452] j721e-pcie 2920000.pcie: PCI host bridge to bus 0002:00 [ 3.969458] pci_bus 0002:00: root bus resource [bus 00-ff] [ 3.969463] pci_bus 0002:00: root bus resource [io 0x20000-0x2ffff] (bus ad)[ 3.982691] printk: console [ttyS2]: printing thread started [ 3.969467] pci_bus 0002:00: root bus resource [mem 0x4400011000-0x4407fffff)[ 3.982697] printk: console [ttyS2] enabled [ 3.982699] printk: bootconsole [ns16550a0] disabled [ 4.008361] printk: bootconsole [ns16550a0]: printing thread stopped [ 4.017762] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 34, base_baud = 30[ 4.024270] 2840000.serial: ttyS6 at MMIO 0x2840000 (irq = 35, base_baud = 30[ 4.043237] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vdd[ 4.043246] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vcd[ 4.043249] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vcd[ 4.043252] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vcd[ 4.044265] scsi host0: ufshcd [ 4.063021] cdns-ufshcd 4e84000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[10[ 4.087066] cdns-ufshcd 4e84000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[32[ 4.087100] cdns-ufshcd 4e84000.ufs: ufshcd_find_max_sup_active_icc_level: R0[ 4.087270] scsi 0:0:0:49488: Well-known LUN TOSHIBA THGAF8G8T23BAILB 036[ 4.087777] scsi 0:0:0:49476: Well-known LUN TOSHIBA THGAF8G8T23BAILB 036[ 4.088130] cdns-ufshcd 4e84000.ufs: ufshcd_scsi_add_wlus: BOOT WLUN not foud[ 4.170411] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 0[ 4.171658] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, dri7[ 4.171709] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss ve0[ 4.173025] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010a, freq:200000000, ad0[ 4.289355] davinci-mcasp 2ba0000.mcasp: IRQ common not found [ 4.289813] mmc0: CQHCI version 5.10 [ 4.305504] vdd_mmc1: supplied by vsys_3v3 [ 4.306361] pca953x 4-0020: supply vcc not found, using dummy regulator [ 4.306471] pca953x 4-0020: using no AI [ 4.330841] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 6t[ 4.331564] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc7100 [ 4.331926] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc7100 [ 4.332249] omap-mailbox 31f82000.mailbox: omap mailbox rev 0x66fc7100 [ 4.332575] omap-mailbox 31f83000.mailbox: omap mailbox rev 0x66fc7100 [ 4.332875] omap-mailbox 31f84000.mailbox: omap mailbox rev 0x66fc7100 [ 4.376803] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan:)[ 4.387664] ti-udma 31150000.dma-controller: Channels: 122 (tchan: 61, rchan)[ 4.394481] spi-nor spi0.0: mt35xu512aba (65536 Kbytes) [ 4.394501] 8 cmdlinepart partitions found on MTD device 47040000.spi.0 [ 4.394503] Creating 8 MTD partitions on "47040000.spi.0": [ 4.394507] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 4.395087] 0x000000080000-0x000000280000 : "ospi.tispl" [ 4.395542] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 4.395984] 0x000000680000-0x0000006c0000 : "ospi.env" [ 4.396413] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw" [ 4.396851] 0x0000007c0000-0x000000800000 : "ospi.env.backup" [ 4.397280] 0x000000800000-0x000003fc0000 : "ospi.rootfs" [ 4.397737] 0x000003fc0000-0x000004000000 : "ospi.phypattern" [ 4.401194] spi-nor spi1.0: mt25qu512a (65536 Kbytes) [ 4.437986] mmc0: Command Queue Engine enabled [ 4.437997] mmc0: new HS200 MMC card at address 0001 [ 4.442411] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 0[ 4.443550] mmcblk0: mmc0:0001 S0J56X 14.8 GiB [ 4.443619] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, dri7[ 4.443674] mmcblk0boot0: mmc0:0001 S0J56X partition 1 31.5 MiB [ 4.443686] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss ve0[ 4.443810] mmcblk0boot1: mmc0:0001 S0J56X partition 2 31.5 MiB [ 4.444064] mmcblk0rpmb: mmc0:0001 S0J56X partition 3 4.00 MiB, chardev (237)[ 4.444891] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 [ 4.470439] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 14[ 4.470445] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 [ 4.515675] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010a, freq:50000[ 4.517308] davinci-mcasp 2ba0000.mcasp: IRQ common not found 4.525434] mmc1: CQHCI version 5.10 [ 4.527223] debugfs: Directory 'pd:27' with parent 'pm_genpd' already presen![ 4.527252] debugfs: Directory 'pd:26' with parent 'pm_genpd' already presen![ 4.528621] debugfs: Directory 'pd:242' with parent 'pm_genpd' already prese![ 4.528642] debugfs: Directory 'pd:241' with parent 'pm_genpd' already prese![ 4.528662] debugfs: Directory 'pd:240' with parent 'pm_genpd' already prese![ 4.528691] debugfs: Directory 'pd:239' with parent 'pm_genpd' already prese![ 4.538517] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 4.555510] ALSA device list: [ 4.555514] No soundcards found. [ 5.592224] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 6t[ 5.592505] Waiting for root device PARTUUID=bfa06bc6-02… [ 5.655962] mmc1: new ultra high speed DDR50 SDHC card at address aaaa [ 5.656355] mmcblk1: mmc1:aaaa SD32G 29.7 GiB [ 5.657545] mmcblk1: p1 p2 [ 5.952404] EXT4-fs (mmcblk1p2): recovery complete [ 5.953221] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. )[ 5.953262] VFS: Mounted root (ext4 filesystem) on device 179:98. [ 5.953791] devtmpfs: mounted [ 5.954744] Freeing unused kernel memory: 1728K [ 5.954854] Run /sbin/init as init process [ 6.112434] systemd[1]: System time before build time, advancing clock. [ 6.160981] NET: Registered protocol family 10 [ 6.161530] Segment Routing with IPv6 [ 6.180594] systemd[1]: systemd 244.5+ running in system mode. (+PAM -AUDIT )[ 6.180795] systemd[1]: Detected architecture arm64. Welcome to Arago 2021.09! [ 6.227001] systemd[1]: Set hostname to <j7-evm>. [ 6.427926] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= r.[ OK ] Created slice system-getty.slice 6.479012] random: systemd: uniniti)m. [ 6.479136] systemd[1]: system-getty.slice: unit configures an IP firewall, .[ 6.479143] systemd[1]: (This warning is only shown for the first unit using)[ 6.480770] systemd[1]: Created slice system-getty.slice. [ 6.505945] random: systemd: uninitialized urandom read (16 bytes read) [ 6.506863] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Created slice User and Session Slic[ 6.546485] random: systemd: uni)e. [ 6.547221] systemd[1]: Created slice User and Session Slice. [ OK ] Started Dispatch Password ��…ts to [ 6.570642] systemd[1]: Started .Console Directory Watch. [ OK ] Started Forward Password R��…uests [ 6.594563] systemd[1]: Started .to Wall Directory Watch. [ OK ] Reached target Paths.[ 6.618548] systemd[1]: Reached target Paths. [ OK ] Reached target Remote File Systems 6.638491] systemd[1]: Reached tar.[0m. [ OK ] Reached target Slices.[ 6.658473] systemd[1]: Reached target Slices. [ OK ] Reached target Swap. [ 6.678477] systemd[1]: Reached target Swap. [ OK ] Listening on RPCbind Server Activat[ 7.736141] systemd[1]: Listenin.ion Socket. [ OK ] Reached target RPC Port Mapper.[ 7.758485] urandom_read_iter: 7 cald [ 7.758490] random: systemd: uninitialized urandom read (16 bytes read) [ 7.758524] systemd[1]: Reached target RPC Port Mapper. [ 7.781220] random: systemd: uninitialized urandom read (16 bytes read) [ 7.783539] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ OK ] Listening on initctl Compatibility [ 7.810484] random: systemd: uni)Named Pipe. [ 7.810659] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on Journal Socket (/dev/l[ 7.842935] systemd[1]: Conditio.og). [ 7.843327] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket.[ 7.866797] systemd[1]: Listening on Jo. [ OK ] Listening on Network Service Netlin[ 7.886817] systemd[1]: Listenin.k Socket. [ OK ] Listening on udev Control Socket 7.910724] systemd[1]: Listening on.m. [ OK ] Listening on udev Kernel Socket[ 7.930646] systemd[1]: Listening on.. Mounting Huge Pages File System…[ 7.953020] systemd[1]: Mounting . Mounting POSIX Message Queue File System..[ 7.976939] systemd[1]: M.. Mounting Kernel Debug File System…[ 8.000910] systemd[1]: Mountin. Mounting Temporary Directory (/tmp)… [ 8.025669] systemd[1]: Mounting Temporary Directory (/tmp)… Starting Create list of st��…odes for the curr[ 8.039934] systemd[1.ent kernel… Starting Start psplash boot splash screen.[ 8.064795] systemd[1]: S… Starting RPC Bind…[ 8.089178] systemd[1]: Starting RPC Bind… Starting Journal Service…[ 8.106629] systemd[1]: Condition check .[ 8.109837] systemd[1]: Starting Journal Service… Starting Load Kernel Modules… [ 8.143412] systemd[1]: Starting Load Kernel Modules… Starting Remount Root and Kernel File Systems 8.159850] cryptodev: l.[0m… [ 8.162021] systemd[1]: Starting Remount Root and Kernel File Systems… [ 8.174581] cryptodev: driver 1.10 loaded. Starting udev Coldplug all Devices… [ 8.184959] systemd[1]: Starting udev Coldplug all Devices… [ OK ] Started RPC Bind. [ 8.203606] systemd[1]: Started RPC Bind. [ 8.204450] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ OK ] Started Journal Service. [ 8.219328] systemd[1]: Started Journal Service. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Started Create list of sta��… nodes for the current kernel. [FAILED] Failed to start Start psplash boot splash screen. See 'systemctl status psplash-start.service' for details. [DEPEND] Dependency failed for Star��…progress communication helper. [ OK ] Started Load Kernel Modules. [ OK ] Started Remount Root and Kernel File Systems. Mounting Kernel Configuration File System… [ 9.457875] urandom_read_iter: 31 callbacks suppressed [ 9.457888] random: systemd: uninitialized urandom read (16 bytes read) Starting Flush Journal to Persistent Storage 9.462366] random: syst)0m… [ 9.468773] systemd-journald[211]: Received client request to flush runtime . Starting Apply Kernel Variables…[ 9.494566] random: systemd: unin) Starting Create Static Device Nodes in /dev… [ OK ] Started udev Coldplug all Devices. [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram… Mounting /var/volatile… Starting udev Wait for Complete Device Initialization… Starting udev Kernel Device Manager… [ OK ] Mounted /media/ram. [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed… [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories… [ OK ] Started udev Kernel Device Manager. [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization… Starting Update UTMP about System Boot/Shutdown… [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Set. [ OK ] Reached target System Time Synchronized. [ 10.198636] CAN device driver interface [ 10.460967] urandom_read_iter: 27 callbacks suppressed [ 10.460977] random: systemd: uninitialized urandom read (16 bytes read) [ 11.350434] random: crng init done [ 11.350442] random: 3 urandom warning(s) missed due to ratelimiting [ OK ] Started Load/Save Random Seed.[ 11.636312] k3-dsp-rproc 4d80800000.d0 [ 11.652626] k3-dsp-rproc 4d80800000.dsp: configured DSP for IPC-only mode [ 11.652719] remoteproc remoteproc0: 4d80800000.dsp is available [ 11.652783] remoteproc remoteproc0: attaching to 4d80800000.dsp [ 11.652793] remoteproc remoteproc0: rsc table is truncated [ 11.652796] remoteproc remoteproc0: Failed to process resources: -22 [ 11.652799] k3-dsp-rproc 4d80800000.dsp: failed to add register device with 2[ 11.670389] k3-dsp-rproc: probe of 4d80800000.dsp failed with error -22 [ 11.672623] k3-dsp-rproc 4d81800000.dsp: assigned reserved memory node c66-d0[ 11.697819] k3-dsp-rproc 4d81800000.dsp: configured DSP for IPC-only mode [ 11.697896] remoteproc remoteproc1: 4d81800000.dsp is available [ 11.697944] remoteproc remoteproc1: attaching to 4d81800000.dsp [ 11.697955] remoteproc remoteproc1: rsc table is truncated [ 11.697958] remoteproc remoteproc1: Failed to process resources: -22 [ 11.697961] k3-dsp-rproc 4d81800000.dsp: failed to add register device with 2[ 11.709328] k3-dsp-rproc: probe of 4d81800000.dsp failed with error -22 [ 11.715938] k3-dsp-rproc 64800000.dsp: assigned reserved memory node c71-dma0[ 11.728524] [drm] Initialized tidss 1.0.0 20180215 for 4a00000.dss on minor 0[ 11.728567] tidss 4a00000.dss: [drm] Cannot find any crtc or sizes [ 11.746465] k3-dsp-rproc 64800000.dsp: configured DSP for IPC-only mode [ 11.747264] remoteproc remoteproc2: 64800000.dsp is available [ 11.747311] remoteproc remoteproc2: attaching to 64800000.dsp [ 11.761351] k3-dsp-rproc 64800000.dsp: DSP initialized in IPC-only mode [ 11.761375] remoteproc2#vdev0buffer: assigned reserved memory node c71-dma-0[ 11.772120] pvrsrvkm 4e20000000.gpu: More than one power domain for this GPUs[ 11.786426] img_enc 4200000.video-encoder: vxe_enc_probe: using heap 1 for ic[ 11.811797] virtio_rpmsg_bus virtio0: rpmsg host is online [ 11.822227] remoteproc2#vdev0buffer: registered virtio0 (type 7) [ 11.822238] remoteproc remoteproc2: remote processor 64800000.dsp is now attd[ 11.836630] PVR_K: 241: Read BVNC 22.104.208.318 from HW device registers [ 11.836643] PVR_K: 241: RGX Device registered with BVNC 22.104.208.318 [ 11.879925] [drm] Initialized pvr 1.15.6133109 20170530 for 4e20000000.gpu o1[ 11.890609] img_enc 4200000.video-encoder: encoder registered as /dev/video0 [ 11.984582] img_dec 4300000.video-decoder: decoder registered as /dev/video1 [ 12.148233] platform 41000000.r5f: R5F core may have been powered on by a di)[ 12.148463] platform 41000000.r5f: configured R5F for IPC-only mode [ 12.148645] platform 41000000.r5f: assigned reserved memory node r5f-dma-mem0[ 12.152212] remoteproc remoteproc3: 41000000.r5f is available [ 12.152260] remoteproc remoteproc3: attaching to 41000000.r5f [ 12.157452] platform 41000000.r5f: R5F core initialized in IPC-only mode [ 12.157473] remoteproc3#vdev0buffer: assigned reserved memory node r5f-dma-0[ 12.157835] virtio_rpmsg_bus virtio1: rpmsg host is online [ 12.158124] remoteproc3#vdev0buffer: registered virtio1 (type 7) [ 12.158129] remoteproc remoteproc3: remote processor 41000000.r5f is now attd[ 12.171749] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addd[ 12.171885] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xe [ 12.177287] platform 5c00000.r5f: configured R5F for IPC-only mode [ 12.177448] platform 5c00000.r5f: assigned reserved memory node r5f-dma-memo0[ 12.177882] remoteproc remoteproc4: 5c00000.r5f is available [ 12.177926] remoteproc remoteproc4: attaching to 5c00000.r5f [ 12.190568] platform 5c00000.r5f: R5F core initialized in IPC-only mode [ 12.190587] remoteproc4#vdev0buffer: assigned reserved memory node r5f-dma-0[ 12.191927] virtio_rpmsg_bus virtio2: rpmsg host is online [ 12.192261] remoteproc4#vdev0buffer: registered virtio2 (type 7) [ 12.192266] remoteproc remoteproc4: remote processor 5c00000.r5f is now attad[ 12.193892] platform 5d00000.r5f: configured R5F for IPC-only mode [ 12.194152] platform 5d00000.r5f: assigned reserved memory node r5f-dma-memo0[ 12.197015] remoteproc remoteproc5: 5d00000.r5f is available [ 12.197112] remoteproc remoteproc5: attaching to 5d00000.r5f [ 12.197576] platform 5d00000.r5f: R5F core initialized in IPC-only mode [ 12.197582] remoteproc remoteproc5: remote processor 5d00000.r5f is now attad[ 12.202950] platform 5e00000.r5f: configured R5F for remoteproc mode [ 12.203497] platform 5e00000.r5f: assigned reserved memory node r5f-dma-memo0[ 12.203914] remoteproc remoteproc6: 5e00000.r5f is available [ 12.204024] remoteproc remoteproc6: Direct firmware load for j7-main-r5f1_0-2[ 12.204029] remoteproc remoteproc6: powering up 5e00000.r5f [ 12.204042] remoteproc remoteproc6: Direct firmware load for j7-main-r5f1_0-2[ 12.204046] remoteproc remoteproc6: request_firmware failed: -2 [ 12.204370] platform 5f00000.r5f: configured R5F for remoteproc mode [ 12.204841] platform 5f00000.r5f: assigned reserved memory node r5f-dma-memo0[ 12.205243] remoteproc remoteproc7: 5f00000.r5f is available [ 12.205319] remoteproc remoteproc7: Direct firmware load for j7-main-r5f1_1-2[ 12.205325] remoteproc remoteproc7: powering up 5f00000.r5f [ 12.205337] remoteproc remoteproc7: Direct firmware load for j7-main-r5f1_1-2[ 12.205341] remoteproc remoteproc7: request_firmware failed: -2 [ 12.206742] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xd [ 13.633542] m_can_platform 40528000.can: m_can device registered (irq=23, ve)[ 13.651579] m_can_platform 40568000.can: m_can device registered (irq=25, ve)[ 13.667029] m_can_platform 2701000.can: m_can device registered (irq=55, ver)[ 13.669945] m_can_platform 2721000.can: m_can device registered (irq=57, ver)[ 15.031461] remoteproc remoteproc8: b034000.pru is available [ 15.058843] remoteproc remoteproc9: b004000.rtu is available [ 15.060453] remoteproc remoteproc10: b00a000.txpru is available [ 15.060691] remoteproc remoteproc11: b038000.pru is available [ 15.060960] remoteproc remoteproc12: b006000.rtu is available [ 15.061176] remoteproc remoteproc13: b00c000.txpru is available [ 15.061344] remoteproc remoteproc14: b134000.pru is available [ 15.061526] remoteproc remoteproc15: b104000.rtu is available [ 15.061948] remoteproc remoteproc16: b10a000.txpru is available [ 15.062353] remoteproc remoteproc17: b138000.pru is available [ 15.084990] usbcore: registered new interface driver usbfs [ 15.085014] usbcore: registered new interface driver hub [ 15.085040] usbcore: registered new device driver usb [ 15.087728] remoteproc remoteproc18: b106000.rtu is available [ 15.088370] remoteproc remoteproc19: b10c000.txpru is available [ 15.111405] omap_rng 4e10000.rng: Random Number Generator ver. 241b34c [ 16.412680] cdns-csi2rx: probe of 4504000.csi-bridge failed with error -22 [ 16.415358] cdns-csi2rx: probe of 4514000.csi-bridge failed with error -22 Starting Start psplash boot splash screen.[ 16.422103] xhci-hcd xhcir.. [ 16.422127] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus n1[ 16.422252] xhci-hcd xhci-hcd.2.auto: hcc params 0x200073c9 hci version 0x100[FAILED] Failed to start Start psplash boo[ 16.426558] xhci-hcd xhci-hcd.2.au0t splash screen. [ 16.426788] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, b0See 'systemctl status psplash-start.service' for details.[ 16.426793] usb usb1 [ 16.426797] usb usb1: Product: xHCI Host Controller [ 16.426799] usb usb1: Manufacturer: Linux 5.10.120-rt70-gadb96c641c xhci-hcd [ 16.426801] usb usb1: SerialNumber: xhci-hcd.2.auto [DEPEND] Dependency failed for Star�[ 16.432684] hub 1-0:1.0: USB hub found �…progress communication helper. [ 16.432722] hub 1-0:1.0: 1 port detected [ 16.434084] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 16.434097] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus n2[ 16.434106] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 16.434159] usb usb2: We don't know the algorithms for LPM for this host, di.[ 16.434214] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, b0[ 16.434218] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1[ 16.434221] usb usb2: Product: xHCI Host Controller [ 16.434223] usb usb2: Manufacturer: Linux 5.10.120-rt70-gadb96c641c xhci-hcd [ 16.434226] usb usb2: SerialNumber: xhci-hcd.2.auto [ 16.434581] hub 2-0:1.0: USB hub found [ 16.434601] hub 2-0:1.0: 1 port detected [ 16.686431] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Found device /dev/mmcblk1p1. Starting File System Check on /dev/mmcblk1p1… [ 16.834797] usb 1-1: New USB device found, idVendor=0451, idProduct=8142, bc0[ 16.834808] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1[ 16.834811] usb 1-1: SerialNumber: 81000869A119 [ 16.835422] hub 1-1:1.0: USB hub found [ 16.835465] hub 1-1:1.0: 4 ports detected [ OK ] Started File System Check on /dev/mmcblk1p1. Mounting /run/media/mmcblk1p1… [ OK ] Started udev Wait for Complete Device Initialization. [ OK ] Started Hardware RNG Entropy Gatherer Daemon. [ OK ] Reached target System Initialization. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Docker Socket for the API. [ OK ] Listening on dropbear.socket. Starting Reboot and dump vmcore via kexec… [ OK ] Mounted /run/media/mmcblk1p1. [ OK ] Listening on Docker Socket for the API. [ OK ] Started Reboot and dump vmcore via kexec. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Save/Restore Sound Card State… [ OK ] Started Job spooling tools. [ OK ] Started Periodic Command Scheduler. [ OK ] Started D-Bus System Message Bus. Starting Print notice about GPLv3 packages… Starting set host name as per compatible name… Starting IPv6 Packet Filtering Framework… Starting IPv4 Packet Filtering Framework… [ OK ] Started irqbalance daemon. Starting Telephony service… Starting Update pmic regis��…fety feature on power rails… Starting rc.pvr.service… Starting startwlanap… Starting startwlansta… Starting Login Service… [ OK ] Started TEE Supplicant. Starting Update weston ini��… based on the platform name… [ OK ] Started Save/Restore Sound Card State. [ OK ] Reached target Sound Card. [ OK ] Started IPv6 Packet Filtering Framework. [ OK ] Started startwlansta. [ OK ] Started Update pmic regist��…safety feature on power rails. [ OK ] Started Telephony service. E/TC:1 0 std_entry_with_parg:234 Bad arg address 0x886892000 [ OK ] Started IPv4 Packet Filtering Framework. [ OK ] Reached target Network (Pre). Starting Network Service… [ OK ] Listening on Load/Save RF ��…itch Status /dev/rfkill Watch. [ 17.565138] Bluetooth: Core ver 2.22 [ 17.565212] NET: Registered protocol family 31 [ 17.565214] Bluetooth: HCI device and connection manager initialized [ 17.565226] Bluetooth: HCI socket layer initialized [ 17.565232] Bluetooth: L2CAP socket layer initialized [ 17.565240] Bluetooth: SCO socket layer initialized [ OK ] Started startwlanap. [ OK ] Started Update weston ini ��…ge based on the platform name. [ OK ] Started set host name as per compatible name. [ OK ] Started Network Service. Starting Wait for Network to be Configured… Starting Network Name Resolution… [ 17.834095] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] dr)[ 17.834116] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmiie[ OK ] Started Login Service. [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. Starting Avahi mDNS/DNS-SD Stack… Starting Enable and configure wl18xx bluetooth stack… [ OK ] Started NFS status monitor for NFSv2/3 locking.. Starting Simple Network Ma��…ent Protocol (SNMP) Daemon…. Starting Permit User Sessions… [ OK ] Started Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Started Serial Getty on ttyS3. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks… [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Enable and configure wl18xx bluetooth stack. [ OK ] Started rc.pvr.service. Starting weston.service… [ OK ] Started weston.service. Starting DEMO… Starting telnetd.service… [ OK ] Started DEMO. [ OK ] Started telnetd.service. [ OK ] Started Simple Network Man��…ement Protocol (SNMP) Daemon.. [ 18.869225] PVR_K: 1090: RGX Firmware image 'rgx.fw.22.104.208.318' loaded [ 18.891775] PVR_K: 1090: Shader binary image 'rgx.sh.22.104.208.318' loaded *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf bash-dev bash bc binutils cifs-utils coreutils-stdbuf coreutils cpio cpp-symlinks cpp dosfstools elfutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbserver gettext glmark2 gstreamer1.0-libav-dev gstreamer1.0-libav gzip less libasm1 libbfd libdw1 libelf1 libgdbm-compat4 libgdbm-dev libgdbm6 libgettextlib libgettextsrc libgmp-dev libgmp10 libgmpxx4 libidn2-0 libidn2-dev libmpc3 libmpfr6 libreadline-dev libreadline8 libunistring-dev libunistring2 m4-dev m4 make nettle-dev nettle parted python3-rfc3987 python3-strict-rfc3339 tar which zeromq If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove <package> Where <package> is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the –force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project j7-evm ttyS2 Arago 2021.09 j7-evm ttyS2 j7-evm login: root root@j7-evm:~# cd /opt/vision_apps root@j7-evm:/opt/vision_apps# source ./vision_apps_init.sh root@j7-evm:/opt/vision_apps# APP_LOG: ERROR: Unable to map memory @ 0xb2000000![ 140.087771] Initializing XFRM netlink socket [ 141.647693] bridge: filtering via arp/ip/ip6tables is no longer available by.[ 141.650319] Bridge firewalling registered [ 142.267449] process 'docker/tmp/qemu-check045724917/check' started with execksource ./vision_apps_init.sh root@j7-evm:/opt/vision_apps# APP_LOG: ERROR: Unable to map memory @ 0xb2000000! root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# cd root@j7-evm:~# ls root@j7-evm:~# ll -sh: ll: command not found root@j7-evm:~# ll -sh: ll: command not found root@j7-evm:~# cd /opt/vision_apps root@j7-evm:/opt/vision_apps# cd root@j7-evm:~# ls root@j7-evm:~# ll -sh: ll: command not found root@j7-evm:~# pwd /home/root root@j7-evm:~# cd root -sh: cd: root: No such file or directory root@j7-evm:~# cd /home/root/ root@j7-evm:~# ls root@j7-evm:~# ls root@j7-evm:~# ll -sh: ll: command not found root@j7-evm:~# ls root@j7-evm:~# dir root@j7-evm:~# ls root@j7-evm:~# cd /opt/vision_apps root@j7-evm:/opt/vision_apps# ls app_avp.cfg run_app_viss.sh app_avp2.cfg run_ptk_demo.sh app_avp3.cfg script.exp app_avp4.cfg test_data app_c7x.cfg test_data_ptk app_dof.cfg test_list.txt app_encode.cfg uEnv_j721e_edgeai_apps.txt app_multi_cam.cfg uEnv_j721e_vision_apps.txt app_multi_cam_codec.cfg uEnv_j721s2_edgeai_apps.txt app_oc.cfg uEnv_j721s2_vision_apps.txt app_oc_16bit.cfg uEnv_j784s4_edgeai_apps.txt app_od.cfg uEnv_j784s4_vision_apps.txt app_od_cam.cfg vision_apps_init.sh app_pcie_video_sink.cfg vx_app_arm_fd_exchange_consumer.out app_pcie_video_source.cfg vx_app_arm_fd_exchange_producer.out app_seg.cfg vx_app_arm_ipc.out app_seg_16bit.cfg vx_app_arm_mem.out app_seg_cam.cfg vx_app_arm_opengl_mosaic.out app_sfm.cfg vx_app_arm_remote_log.out app_single_cam.cfg vx_app_c7x_kernel.out app_srv.cfg vx_app_conformance.out app_srv_avp_cfg vx_app_dense_optical_flow.out app_stereo.cfg vx_app_dof_sfm_fisheye.out app_tidl_cam.cfg vx_app_heap_stats.out app_vl.cfg vx_app_lidar_ogmap.out autorun.sh vx_app_load_test.out k3-j784s4-vision-apps.dtbo vx_app_multi_cam.out limits.conf vx_app_multi_cam_codec.out ptk_app_cfg vx_app_sde.out run_app_arm_fd_exchange.sh vx_app_sde_obstacle_detection.out run_app_c7x.sh vx_app_sfm.out run_app_dof.sh vx_app_single_cam.out run_app_load_test.sh vx_app_srv_calibration.out run_app_multi_cam.sh vx_app_srv_camera.out run_app_multi_cam_codec.sh vx_app_srv_fileio.out run_app_sfm.sh vx_app_stereo_depth.out run_app_single_cam.sh vx_app_surround_radar_ogmap.out run_app_srv.sh vx_app_test_framework.out run_app_srv_avp.sh vx_app_tidl.out run_app_stereo.sh vx_app_tidl_avp.out run_app_tidl.sh vx_app_tidl_avp2.out run_app_tidl_16bit.sh vx_app_tidl_avp3.out run_app_tidl_avp.sh vx_app_tidl_avp4.out run_app_tidl_avp2.sh vx_app_tidl_cam.out run_app_tidl_avp3.sh vx_app_tidl_od.out run_app_tidl_avp4.sh vx_app_tidl_od_cam.out run_app_tidl_cam.sh vx_app_tidl_seg.out run_app_tidl_od.sh vx_app_tidl_seg_cam.out run_app_tidl_od_cam.sh vx_app_tidl_vl.out run_app_tidl_seg.sh vx_app_tutorial.out run_app_tidl_seg_16bit.sh vx_app_valet_parking.out run_app_tidl_seg_cam.sh vx_app_viss.out run_app_tidl_vl.sh root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# root@j7-evm:/opt/vision_apps# source ./vision_apps_init.sh root@j7-evm:/opt/vision_apps# APP_LOG: ERROR: Unable to map memory @ 0xb2000000!

,

??? ?：

我看了下启动信息：

uenv.txt这个文件内包含了

psdk_setup_file=.psdk_setupcheck_psdk_setup=load mmc 1:1 ${loadaddr} ${psdk_setup_file}

# Reset to the default environmentdo_psdk_setup=env default -f -a; saveenv

# If not previously configured, then configure the environment and indicate this by writing a fileuenvcmd=if run check_psdk_setup; then echo "Already setup."; else run do_psdk_setup; mw.b ${loadaddr} 0 1; fatwrite mmc 1:1 ${loadaddr} .psdk_setup 1; reset; fi

dorprocboot=1name_overlays=k3-j721e-vision-apps.dtbo

但是启动的LOG里面报错：Failed to load '/boot/k3-j721e-vision-apps.dtbo'

18303488 bytes read in 765 ms (22.8 MiB/s) 104096 bytes read in 13 ms (7.6 MiB/s) Failed to load '/boot/k3-j721e-vision-apps.dtbo' ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 000000008fee3000, end 000000008fffffff … OK

k3-j721e-vision-apps.dtbo这个文件在哪确认呢

,

Shine：

我把您的问题升级到英文e2e论坛了，请关注下面帖子的回复。https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1160750/tda4vm-app_log-error-unable-to-map-memory-0xb2000000-of-size-262144-byte

,

Shine：

请看下面e2e工程师的回复。

-> Are there some memory related changes made in the SDK?

-> Any change in the Linux SDK, or are you using the prebuilt filesystem and boot tar files?