TI中文支持网Part Number:AWR6843ISKOther Parts Discussed in Thread:UNIFLASH
您好:
我目前使用UniFlash 7.1 進行燒錄xwr68xx_mmw_demo.bin
設定部份及方法皆依照影片施作 training.ti.com/hardware-setup-iwr6843isk-and-iwr6843isk-ods
但是一直出現
Error! Image loading failed: Not able to connect to serial port. Recheck COM port selected and/or permissions.
Console
[2022/3/21 下午2:11:47] [INFO] Cortex_R4_0: Initialization complete.
[2022/3/21 下午2:11:47] [INFO] Cortex_R4_0: Flashing process starting…
[2022/3/21 下午2:11:47] [INFO] Cortex_R4_0: Connecting to COM Port COM4…
[2022/3/21 下午2:11:47] [INFO] Cortex_R4_0: Reset connection to device
[2022/3/21 下午2:11:48] [INFO] Cortex_R4_0: Set break signal
[2022/3/21 下午2:12:08] [ERROR] Cortex_R4_0: Initial response from the device was not received. Please power cycle device before re-flashing.
[2022/3/21 下午2:12:08] [ERROR] Cortex_R4_0: Not able to connect to serial port. Recheck COM port selected and/or permissions.
[2022/3/21 下午2:12:08] [INFO] Cortex_R4_0: Flashing instance clean-up initiated…
[2022/3/21 下午2:12:08] [INFO] Cortex_R4_0: Instance deinitialized!
Shine：
请先按照下面网站上的配置比对一下您板子的配置，特别是SOP配置成flash mode。https://dev.ti.com/tirex/explore/content/mmwave_industrial_toolbox_4_7_0/labs/common/docs/hardware_setup/hw_setup_isk_ods_modular_mode_flashing.html如果还是不行，请按照下面帖子里的建议检查，先看一下PC的串口是否有问题，串口线是否好的，其他会用到串口的软件要关闭。https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1017510/iwr6843aop-image-loading-failed-not-able-to-connect-to-serial-port-recheck-com-port-selected-and-or-permissions
