TI中文支持网大家好
我先有这个一个需求，我想修改stdout，裸工程，stdio.h中将stdout设置为屏幕显示，我能否用一个文件句柄将stdout代替呢
最后就是我调用printf,然后把信息写进我的文件里，而不是打印在控制台？
请问这个需求能否实现呢？
谢谢
Nancy Wang：
第一个问题不清楚，关于printf重定向的问题，参考以下链接中的方法试一下。
software-dl.ti.com/…/sdto_cgt_tips_for_using_printf.html
如何修改stdout
未经允许不得转载：TI中文支持网 » 如何修改stdout
相关推荐
AM62A7-Q1: gpio设置异常- AM6422: How to relocate the Exception Vector Table in the MCU R5
- TMS320C6678: 核0启动核1，核1没有运行起来
- TMS320C6678: TMS320C6678网络中断问题：核0创建任务后Ping失败
- TDA4VM: During DSP6678 debugging, after creating a print test task on Core 0, the previously functional network connection was interrupted with the error: Destination Host Unreachable.
- AM62P: The issue of poor performance when the MNN(alibaba Mobile Neural Network) inference framework calls the GPU for inference via OpenCL.
- TMS320C6678: C6678CSL库EDMA3的AB同步传输无法启用除0通道以外的别的通道
- AM6442: [IPC RPMSG] Message send to remote core 5 @ 16 end point truncated due to lack of space in vring buffer !!!
![AM6442: [IPC RPMSG] Message send to remote core 5 @ 16 end point truncated due to lack of space in vring buffer !!!-TI中文支持网](https://www.ti2k.com/wp-content/uploads/ti2k/DeyiSupport_DSP_pastedimage1753265713483v1.jpg)