求助各位高手，作为初学者，我修改了一点USB的驱动，是否要重新生成MLO或u-boot.img文件才能让我的修改生效，还有如何产生新的文件？谢谢
需要重新编译，请问用的是哪款器件？哪个版本的SDK? 在SDK文档里有编译说明。
,
am335x，sdk是6.0的，是不是直接make就能生成？
,
请参考下面的SDK developer guide
Compiling MLO and u-boot
software-dl.ti.com/…/Foundational_Components_U-Boot.html
AM62A7-Q1: gpio设置异常
AM6422: How to relocate the Exception Vector Table in the MCU R5
TMS320C6678: 核0启动核1，核1没有运行起来
TMS320C6678: TMS320C6678网络中断问题：核0创建任务后Ping失败TDA4VM: During DSP6678 debugging, after creating a print test task on Core 0, the previously functional network connection was interrupted with the error: Destination Host Unreachable.AM62P: The issue of poor performance when the MNN(alibaba Mobile Neural Network) inference framework calls the GPU for inference via OpenCL.TMS320C6678: C6678CSL库EDMA3的AB同步传输无法启用除0通道以外的别的通道![AM6442: [IPC RPMSG] Message send to remote core 5 @ 16 end point truncated due to lack of space in vring buffer !!!-TI中文支持网](https://www.ti2k.com/wp-content/uploads/ti2k/DeyiSupport_DSP_pastedimage1753265713483v1.jpg)
AM6442: [IPC RPMSG] Message send to remote core 5 @ 16 end point truncated due to lack of space in vring buffer !!!
TI中文支持网