AWR2243BOOST: 请问怎么修改DCA1000 EVM板子的ip地址和MAC地址？

我希望可以通过一台电脑同时捕获4个雷达接收的数据，但是DCA1000 EVM似乎固定ip地址为192.168.33.180，mac地址为12.34.56.78.90.12。

请问我该怎么修改，让不同的DCA1000 EVM有不同的ip地址和mac地址。

我通过DCA1000EVM_CLI_Control.exe的json配置文件修改，发现更改DCA1000IPAddress字段后，连接失败

{
	"DCA1000Config": {
			"dataLoggingMode": "raw",
			"dataTransferMode": "LVDSCapture",
			"dataCaptureMode": "ethernetStream",
			"lvdsMode": 1,
			"dataFormatMode": 1,
			"packetDelay_us": 25,
			"ethernetConfig": {
					"DCA1000IPAddress": "192.168.33.181",
					"DCA1000ConfigPort": 4096,
					"DCA1000DataPort": 4098
			},
			"ethernetConfigUpdate": {
					"systemIPAddress": "192.168.33.30",
					"DCA1000IPAddress": "192.168.33.181",
					"DCA1000MACAddress": "12.34.56.78.90.12",
					"DCA1000ConfigPort": 4096,
					"DCA1000DataPort": 4098
					}
	}
}
					

如果是192.168.33.180就连接成功

Shine：

要写到eeprom里，请看TI_DCA1000EVM_CLI_Software_UserGuide.pdf的3.1.4.2 Configure EEPROM CLI_Control tool will execute this command to reconfigure the IP address of the DCA1000EVM with the following configuration 1. MAC ID (ethernetConfigUpdate -> DCA1000MACAddress)2. PC IP Address (ethernetConfigUpdate -> systemIPAddress) 3. Board IP Address (ethernetConfigUpdate -> DCA1000IPAddress) 4. Record port number (ethernetConfigUpdate -> DCA1000DataPort) 5. Configuration port number (ethernetConfigUpdate -> DCA1000ConfigPort) Command: DCA1000EVM_CLI_Control.exe eeprom configFile.json

,

shen huo：

您好，请问执行完这条命令

DCA1000EVM_CLI_Control.exe eeprom configFile.json

后还需要什么操作。

我执行完命令行中显示执行成功，但并没有效果。ip并没有变成我在ethernetConfigUpdate -> DCA1000MACAddress写的新ip。

尝试断开电源重连，重置DCA1000 EVM板也是一样。

,

Shine：

请看一下SW2.6是否拨到USER_SW1 (Using EEPROM configuration)https://www.ti.com/lit/ug/spruij4a/spruij4a.pdf