DCA1000EVM: invalid lvdsmode value

DCA1000采不到数据，我用mmwave studio的时候，显示invalid lvdsmode value ,而且配置frame的时候显示Test Source already disabled

而且我不知道为什么，我按照手册上的步骤做，DCA1000板子只有一个FPGA_DONE_LED灯亮着，其余没有一个灯亮，除了一开始接电源的时候，data_tran_png亮了几秒。

yu zhou：

GM: Constructor GM: Mon Dec 20 22:03:52 2021 RSTD.Transmit("/Settings") [22:03:53] [22:03:53] ### Running Startup script: "C:\ti\mmwave_studio_02_01_01_00\mmWaveStudio\Scripts\Startup.lua" ### [22:03:53] RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1") [22:03:53] RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss") [22:03:53] Scripter ignored: Attempt to UnBuild() again or before Build. [22:03:53] RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_02_01_01_00\\mmWaveStudio\\Clients\\\\LabClient.dll") [22:03:53] RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE") [22:03:53] RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE") [22:03:53] RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE") [22:03:53] RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE") [22:03:53] RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE") [22:03:53] RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_02_01_01_00\\mmWaveStudio\\RunTime\\SAL.dll") [22:03:53] RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "") [22:03:53] RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE") [22:03:53] RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1") [22:03:53] RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE") [22:03:53] RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE") [22:03:53] RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false") [22:03:53] RSTD.Transmit("/") [22:03:53] RSTD.SaveSettings(): Settings saved to "C:\Users\Administrator\AppData\Roaming\RSTD\config.xml" [22:03:53] RSTD.Build() [22:03:53] RSTD.SaveSettings(): Settings saved to "C:\Users\Administrator\AppData\Roaming\RSTD\config.xml" [22:03:53] RSTD.Transmit("/") [22:03:53] RSTD.AL_Build() [22:03:53] RSTD.AL_LoadXml() [22:03:53] RSTD.Transmit("/") [22:03:53] RSTD.AL_Init() [22:03:53] RSTD.Clients_Build() [22:03:53] GM: Init [22:03:53] GM: Loaded 'C:\ti\mmwave_studio_02_01_01_00\mmWaveStudio\Clients\\LabClient.dll' [22:03:53] GM: 1 Guest (s) init [22:03:53] GM: 1 Module(s) init [22:03:53] GM: 2 Tab (s) init [22:03:53] RSTD.Client_LoadXml() [22:03:54] [RadarAPI]: ar1.selectRadarMode(0) [22:03:54] [RadarAPI]: Status: Passed [22:03:54] Matlab Runtime Engine is installed [22:03:54] [RadarAPI]: Starting Matlab Engine.. [22:04:03] [RadarAPI]: Matlab Engine Started! [22:04:06] [RadarAPI]: ar1.selectCascadeMode(0) [22:04:06] [RadarAPI]: Status: Passed [22:04:06] [RadarAPI]: ar1.LoadSettings('C:\Users\Administrator\AppData\Roaming\RSTD\ar1gui.ini') [22:04:07] TESTING = false [22:04:07] RstdNet: Port 2777: Listening.. [22:04:07] [22:04:07] ***Script completed successfully.*** [22:04:08] [RadarAPI]: ar1.GetCaptureCardDllVersion() [22:04:08] [RadarAPI]: Sending dll_version command to DCA1000 [22:04:08] [RadarAPI]: [22:04:08] DLL Version : 1.0 [22:04:08] [RadarAPI]: ar1.SelectCaptureDevice("DCA1000") [22:04:08] [RadarAPI]: Status: Passed [22:04:09] [RadarAPI]: ar1.CaptureCardConfig_EthInit("192.168.33.30", "192.168.33.180", "12:34:56:78:90:12", 4096, 4098) [22:04:09] [RadarAPI]: ar1.CaptureCardConfig_Mode(1, 0, 1, 2, 3, 30) [22:04:09] [RadarAPI]: ar1.CaptureCardConfig_PacketDelay(25) [22:04:10] [RadarAPI]: Sending fpga command to DCA1000 [22:04:12] [RadarAPI]: [22:04:12] Invalid lvdsMode value (0). [error -4016] [22:04:12] [RadarAPI]: Sending record command to DCA1000 [22:04:12] [RadarAPI]: [22:04:12] Configure Record command : Success [22:04:12] [RadarAPI]: ar1.GetCaptureCardFPGAVersion() [22:04:12] [RadarAPI]: Sending fpga_version command to DCA1000 [22:04:12] [RadarAPI]: [22:04:12] [22:04:12] FPGA Version : 2.8 [Record] [22:04:12] [22:04:15] [RadarAPI]: Opening Gpio Control Port() [22:04:15] [RadarAPI]: Status: Passed [22:04:15] [RadarAPI]: Opening Board Control Port() [22:04:15] [RadarAPI]: Status: Passed [22:04:16] [RadarAPI]: ar1.FullReset() [22:04:16] [RadarAPI]: Status: Passed [22:04:17] [RadarAPI]: Closing Board Control Port() [22:04:17] [RadarAPI]: Status: Passed [22:04:17] [RadarAPI]: Closing Gpio Control Port() [22:04:17] [RadarAPI]: Status: Passed [22:04:17] [RadarAPI]: ar1.SOPControl(2) [22:04:17] [RadarAPI]: Status: Passed [22:04:24] [RadarAPI]: ar1.Connect(14,115200,1000) [22:04:25] [RadarAPI]: ar1.Calling_IsConnected() [22:04:26] [RadarAPI]: ar1.SelectChipVersion("AR1642") [22:04:26] [RadarAPI]: Status: Passed [22:04:26] [RadarAPI]: ar1.SelectChipVersion("AR1642") [22:04:26] [RadarAPI]: Status: Passed [22:04:26] [RadarAPI]: ar1.deviceVariantSelection("XWR1843") [22:04:26] [RadarAPI]: Status: Passed [22:04:26] [RadarAPI]: ar1.frequencyBandSelection("77G") [22:04:26] [RadarAPI]: ar1.SelectChipVersion("XWR1843") [22:04:26] [RadarAPI]: Status: Passed [22:04:26] Device Status : XWR1843/QM/SOP:2/ES:2 [22:04:26] [RadarAPI]: ar1.SaveSettings('C:\Users\Administrator\AppData\Roaming\RSTD\ar1gui.ini') [22:04:28] [RadarAPI]: ar1.DownloadBSSFw("C:\\ti\\mmwave_studio_02_01_01_00\\rf_eval_firmware\\radarss\\xwr18xx_radarss.bin") [22:04:28] [RadarAPI]: Downloading BSS Patch RPRC Binary.. [22:04:36] [RadarAPI]: ar1.GetBSSFwVersion() [22:04:36] [RadarAPI]: BSSFwVersion:(02.00.00.01 (05/10/17)) [22:04:37] [RadarAPI]: ar1.GetBSSPatchFwVersion() [22:04:37] [RadarAPI]: BSSPatchFwVersion:(01.02.05.02 (30/04/19)) [22:04:37] [RadarAPI]: ar1.DownloadMSSFw("C:\\ti\\mmwave_studio_02_01_01_00\\rf_eval_firmware\\masterss\\xwr18xx_masterss.bin") [22:04:38] [RadarAPI]: Downloading MSS RPRC Binary.. [22:04:49] [RadarAPI]: ar1.GetMSSFwVersion() [22:04:49] [RadarAPI]: MSSFwVersion:(01.02.05.02 (16/07/19)) [22:04:53] [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0) [22:04:53] [RadarAPI]: Status: Passed [22:04:53] MSS power up done async event received! [22:04:56] [RadarAPI]: ar1.SelectChipVersion("AR1642") [22:04:56] [RadarAPI]: Status: Passed [22:04:56] [RadarAPI]: ar1.SelectChipVersion("XWR1843") [22:04:56] [RadarAPI]: Status: Passed [22:04:56] Device Status : XWR1843/QM/SOP:2/ES:2 [22:04:56] [RadarAPI]: ar1.RfEnable() [22:04:56] BSS power up done async event received! [22:04:56] [RadarAPI]: Status: Passed [22:04:56] [RadarAPI]: ar1.GetMSSFwVersion() [22:04:56] [RadarAPI]: MSSFwVersion:(01.02.05.02 (16/07/19)) [22:04:57] [RadarAPI]: ar1.GetBSSFwVersion() [22:04:57] [RadarAPI]: BSSFwVersion:(02.00.00.01 (05/10/17)) [22:04:58] [RadarAPI]: ar1.GetBSSPatchFwVersion() [22:04:58] [RadarAPI]: BSSPatchFwVersion:(01.02.05.02 (30/04/19)) [22:05:11] [RadarAPI]: ar1.ChanNAdcConfig(1, 1, 0, 1, 1, 1, 1, 2, 1, 0) [22:05:11] [RadarAPI]: Status: Passed [22:05:19] [RadarAPI]: ar1.LPModConfig(0, 0) [22:05:19] [RadarAPI]: Status: Passed [22:05:24] [RadarAPI]: ar1.RfInit() [22:05:24] [RadarAPI]: Status: Passed [22:05:24] RF Init async event received! [22:05:24] [RadarAPI]: Time stamp, Temperture: 27887,40; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; TxPhase Status, Update: 1, 1; RxIQMM Status, Update: 1, 1; [22:05:36] [RadarAPI]: ar1.LvdsClkConfig(1, 1) [22:05:36] Status: Failed, Error Type: INCORRECT SUB BLOCK LENGTH [22:05:43] [RadarAPI]: ar1.DataPathConfig(513, 1216644097, 0) [22:05:43] [RadarAPI]: Status: Passed [22:05:55] [RadarAPI]: ar1.LvdsClkConfig(1, 1) [22:05:55] [RadarAPI]: Status: Passed [22:06:00] [RadarAPI]: ar1.LVDSLaneConfig(0, 1, 1, 0, 0, 1, 0, 0) [22:06:00] [RadarAPI]: Status: Passed [22:06:10] [RadarAPI]: ar1.ProfileConfig(0, 77, 100, 6, 60, 0, 0, 0, 0, 0, 0, 29.982, 0, 256, 10000, 0, 0, 30) [22:06:10] [RadarAPI]: Status: Passed [22:06:21] [RadarAPI]: ar1.ProfileConfig(0, 77, 100, 6, 60, 0, 0, 0, 0, 0, 0, 29.982, 0, 256, 10000, 0, 0, 30) [22:06:21] [RadarAPI]: Status: Passed [22:07:54] [RadarAPI]: ar1.ProfileConfig(0, 77, 100, 6, 60, 0, 0, 0, 0, 0, 0, 29.982, 0, 256, 10000, 0, 0, 30) [22:07:54] [RadarAPI]: Status: Passed [22:08:04] [RadarAPI]: ar1.ChirpConfig(0, 0, 0, 0, 0, 0, 0, 1, 0, 0) [22:08:04] [RadarAPI]: Status: Passed [22:08:13] Test Source Already Disabled…!!! [22:08:13] [RadarAPI]: ar1.DisableTestSource(0) [22:08:13] [RadarAPI]: Status: Passed [22:08:13] [RadarAPI]: ar1.FrameConfig(0, 0, 8, 128, 40, 0, 0, 1) [22:08:13] [RadarAPI]: Status: Passed [22:08:23] Test Source Already Disabled…!!! [22:08:23] [RadarAPI]: ar1.DisableTestSource(0) [22:08:23] [RadarAPI]: Status: Passed [22:08:23] [RadarAPI]: ar1.FrameConfig(0, 0, 8, 128, 40, 0, 0, 1) [22:08:23] [RadarAPI]: Status: Passed [22:12:16] [RadarAPI]: ar1.ChirpConfig(1, 1, 0, 0, 0, 0, 0, 0, 1, 0) [22:12:16] [RadarAPI]: Status: Passed [22:12:37] Test Source Already Disabled…!!! [22:12:37] [RadarAPI]: ar1.DisableTestSource(0) [22:12:37] [RadarAPI]: Status: Passed [22:12:37] [RadarAPI]: ar1.FrameConfig(0, 1, 10, 32, 40, 0, 0, 1) [22:12:37] [RadarAPI]: Status: Passed [22:12:45] Test Source Already Disabled…!!! [22:12:45] [RadarAPI]: ar1.DisableTestSource(0) [22:12:45] [RadarAPI]: Status: Passed [22:12:45] [RadarAPI]: ar1.FrameConfig(0, 1, 10, 32, 40, 0, 0, 1) [22:12:45] [RadarAPI]: Status: Passed [22:16:08] [RadarAPI]: ar1.CaptureCardConfig_StartRecord("C:\\ti\\mmwave_studio_02_01_01_00\\mmWaveStudio\\PostProc\\adc_data.bin", 1) [22:16:08] [RadarAPI]: Sending start_record command to DCA1000 [22:16:08] [RadarAPI]: [22:16:08] Invalid lvdsMode value (0). [error -4016]

,

yu zhou：

这个是完整的output

,

yu zhou：

,

Shine：

请看一下是不是下面帖子里的操作步骤引起的。https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/939206/dca1000evm-invalid-lvdsmode-value-0-error–4016DCA1000的操作步骤可以参考下面的网站。https://e2echina.ti.com/blogs_/b/the_process/posts/dca1000evm