TI中文支持网Part Number:AWR2243Other Parts Discussed in Thread: MMWCAS-RF-EVM
各位TI的工程师，你们好
我们使用我们自己做的AW2243的4片级联天线板匹配TI的TDA2x Demo板进行调试，在运行MIMO脚本时显示已经连接上，但是提示RF初始化失败，
我们的级联板同TI的级联Demo天线不同，请问是因为天线的不同导致的RF初始化失败吗？还是有其他原因？
谢谢。
GM: Constructor
GM: Tue Mar 22 15:42:00 2022
RSTD.Transmit("/Settings")
[15:42:00][15:42:00] ### Running Startup script: "C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Scripts\Startup.lua" ###
[15:42:00] RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")
[15:42:00] RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")
[15:42:00] Scripter ignored: Attempt to UnBuild() again or before Build.
[15:42:00] RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\Clients\\\\LabClient.dll")
[15:42:00] RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")
[15:42:00] RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")
[15:42:00] RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")
[15:42:00] RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")
[15:42:00] RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")
[15:42:00] RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\RunTime\\SAL.dll")
[15:42:00] RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")
[15:42:00] RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")
[15:42:00] RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")
[15:42:00] RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")
[15:42:00] RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")
[15:42:00] RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")
[15:42:00] RSTD.Transmit("/")
[15:42:00] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"
[15:42:00] RSTD.Build()
[15:42:00] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"
[15:42:00] RSTD.Transmit("/")
[15:42:00] RSTD.AL_Build()
[15:42:00] RSTD.AL_LoadXml()
[15:42:00] RSTD.Transmit("/")
[15:42:00] RSTD.AL_Init()
[15:42:00] RSTD.Clients_Build()
[15:42:00] GM: Init
[15:42:00] GM: Loaded 'C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Clients\\LabClient.dll'
[15:42:00] GM: 1 Guest (s) init
[15:42:00] GM: 1 Module(s) init
[15:42:00] GM: 2 Tab (s) init
[15:42:00] RSTD.Client_LoadXml()
[15:42:01] [RadarAPI]: ar1.selectRadarMode(0)
[15:42:01] [RadarAPI]: Status: Passed
[15:42:01] Matlab Runtime Engine is installed
[15:42:01] [RadarAPI]: Starting Matlab Engine..
[15:42:05] [RadarAPI]: Matlab Engine Started!
[15:42:06] [RadarAPI]: ar1.selectCascadeMode(0)
[15:42:06] [RadarAPI]: Status: Passed
[15:42:06] [RadarAPI]: ar1.LoadSettings('C:\Users\zhuruijie\AppData\Roaming\RSTD\ar1gui.ini')
[15:42:06] TESTING = false
[15:42:06] RstdNet: Port 2777: Listening..
[15:42:06][15:42:06] ***Script completed successfully.***
[15:42:10] [RadarAPI]: ar1.selectRadarMode(1)
[15:42:10] [RadarAPI]: ar1.selectCascadeMode(1)
[15:42:10] [RadarAPI]: Status: Passed
[15:42:10] [RadarAPI]: Status: Passed
[15:42:12] [RadarAPI]: ar1.SelectCaptureDevice("TDA2XX")
[15:42:12] [RadarAPI]: Status: Passed
[15:42:12] [RadarAPI]: TDAStatusCallback Event Registered
[15:42:12] [RadarAPI]: registerTDAStatusCallback Status: Passed
[15:42:12] [RadarAPI]: ar1.ConnectTDA("192.168.33.180", 5001, 15)
[15:42:12] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0[15:42:12] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0[15:42:12] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_VERSION_INFO Async event recieved() with status 0. TDA Version : REL_VISION_SDK_03_07_01_00 Aug 5 2019 15:04:45[15:42:12] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0[15:42:14] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0[15:42:14] [RadarAPI]: ConnectTDACaptureCard Status: Passed
[15:42:14] TDA Capture Card Status : CONNECTED!
[15:43:01] Setting up Studio for Cascade started..
[15:43:01] [RadarAPI]: Connection to the TDA is already established!
[15:43:01] ConnectTDA Successful
[15:43:01] selectCascadeMode Successful
[15:43:01] Setting up Studio for Cascade ended..
[15:43:01] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0[15:43:02] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0[15:43:02] [RadarAPI]: ar1.FullReset(1)
[15:43:02] [RadarAPI]: Status: Passed
[15:43:02] [RadarAPI]: ar1.SOPControl_mult(1,4)
[15:43:02] [RadarAPI]: Status: Passed
[15:43:02] Master : SOP Reset Successful
[15:43:02] [RadarAPI]: ar1.PowerOn_mult(1, 0, 1000, 0,0)
[15:43:02] [DeviceId-0] MSS power up done async event received!
[15:43:02] [RadarAPI]: Status: Passed
[15:43:02] Master : SPI Connection Successful
[15:43:02] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(1, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)
[15:43:06] Master : FW Download Successful
[15:43:06] [RadarAPI]: ar1.SelectChipVersion("AR1243")
[15:43:06] [RadarAPI]: Status: Passed
[15:43:06] [RadarAPI]: ar1.SelectChipVersion("AR1243")
[15:43:06] [RadarAPI]: Status: Passed
[15:43:06] [RadarAPI]: ar1.deviceVariantSelection("XWR2243")
[15:43:06] [RadarAPI]: Status: Passed
[15:43:06] [RadarAPI]: ar1.frequencyBandSelection("77G")
[15:43:06] [RadarAPI]: ar1.SelectChipVersion("XWR2243")
[15:43:06] [RadarAPI]: Status: Passed
[15:43:07] Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1
[15:43:07] [RadarAPI]: ar1.RfEnable_mult(1)
[15:43:07] [DeviceId-0] BSS power up done async event received!
[15:43:07] [RadarAPI]: Status: Passed
[15:43:08] Master : RF Power Up Successful
[15:43:08] [RadarAPI]: ar1.ChanNAdcConfig_mult(1, 1, 1, 1, 1, 1, 1, 1, 2, 1, 0, 1)
[15:43:09] [RadarAPI]: Status: Passed
[15:43:09] Master : Channel & ADC Configuration Successful
[15:43:09] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0[15:43:09] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0[15:43:10] [RadarAPI]: ar1.FullReset(2)
[15:43:10] [RadarAPI]: Status: Passed
[15:43:10] [RadarAPI]: ar1.SOPControl_mult(2,4)
[15:43:10] [RadarAPI]: Status: Passed
[15:43:10] Device 2 : SOP Reset Successful
[15:43:10] [DeviceId-1] MSS power up done async event received!
[15:43:10] [RadarAPI]: ar1.AddDevice(2)
[15:43:10] [RadarAPI]: Status: Passed
[15:43:10] Device 2 : SPI Connection Successful
[15:43:10] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0[15:43:10] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0[15:43:11] [RadarAPI]: ar1.FullReset(4)
[15:43:11] [RadarAPI]: Status: Passed
[15:43:11] [RadarAPI]: ar1.SOPControl_mult(4,4)
[15:43:11] [RadarAPI]: Status: Passed
[15:43:11] Device 3 : SOP Reset Successful
[15:43:11] [DeviceId-2] MSS power up done async event received!
[15:43:11] [RadarAPI]: ar1.AddDevice(4)
[15:43:11] [RadarAPI]: Status: Passed
[15:43:11] Device 3 : SPI Connection Successful
[15:43:11] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0[15:43:11] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0[15:43:11] [RadarAPI]: ar1.FullReset(8)
[15:43:12] [RadarAPI]: Status: Passed
[15:43:12] [RadarAPI]: ar1.SOPControl_mult(8,4)
[15:43:12] [RadarAPI]: Status: Passed
[15:43:12] Device 4 : SOP Reset Successful
[15:43:12] [DeviceId-3] MSS power up done async event received!
[15:43:12] [RadarAPI]: ar1.AddDevice(8)
[15:43:12] [RadarAPI]: Status: Passed
[15:43:12] Device 4 : SPI Connection Successful
[15:43:12] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(14, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)
[15:43:15] [DeviceId-1] MSS Boot Error status Async event recieved(0x102262)
[15:43:15] [DeviceId-2] MSS Boot Error status Async event recieved(0x10226C)
[15:43:15] [DeviceId-3] MSS Boot Error status Async event recieved(0x102262)
[15:43:15] Slaves : FW Download Successful
[15:43:16] [RadarAPI]: ar1.SelectChipVersion("AR1243")
[15:43:16] [RadarAPI]: Status: Passed
[15:43:16] [RadarAPI]: ar1.SelectChipVersion("XWR2243")
[15:43:16] [RadarAPI]: Status: Passed
[15:43:16] Slave1 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1
[15:43:17] [RadarAPI]: ar1.SelectChipVersion("AR1243")
[15:43:17] [RadarAPI]: Status: Passed
[15:43:17] [RadarAPI]: ar1.SelectChipVersion("XWR2243")
[15:43:17] [RadarAPI]: Status: Passed
[15:43:17] Slave2 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1
[15:43:18] [RadarAPI]: ar1.SelectChipVersion("AR1243")
[15:43:18] [RadarAPI]: Status: Passed
[15:43:18] [RadarAPI]: ar1.SelectChipVersion("XWR2243")
[15:43:18] [RadarAPI]: Status: Passed
[15:43:18] Slave3 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1
[15:43:18] [RadarAPI]: ar1.RfEnable_mult(14)
[15:43:18] [DeviceId-1] BSS power up done async event received!
[15:43:18] [DeviceId-3] BSS power up done async event received!
[15:43:18] [DeviceId-2] BSS power up done async event received!
[15:43:18] [RadarAPI]: Status: Passed
[15:43:22] Slaves : RF Power Up Successful
[15:43:22] [RadarAPI]: ar1.ChanNAdcConfig_mult(14, 1, 1, 1, 1, 1, 1, 1, 2, 1, 0, 2)
[15:43:23] [RadarAPI]: Status: Passed
[15:43:23] Slaves : Channel & ADC Configuration Successful
[15:43:23] [RadarAPI]: ar1.RfLdoBypassConfig_mult(15, 0xF)
[15:43:23] [RadarAPI]: Status: Passed
[15:43:23] LDO Bypass Successful
[15:43:23] [RadarAPI]: ar1.LPModConfig_mult(15, 0,0)
[15:43:23] [RadarAPI]: Status: Passed
[15:43:23] Low Power Mode Configuration Successful
[15:43:23] [RadarAPI]: ar1.SetMiscConfig_mult(15, 1, 0, 0, 0)
[15:43:23] [RadarAPI]: Status: Passed
[15:43:23] Misc Control Configuration Successful
[15:43:23] [RadarAPI]: ar1.RfInitCalibConfig_mult(15, 1, 1, 1, 1, 1, 1, 1, 65537)
[15:43:23] [RadarAPI]: Status: Passed
[15:43:23] RF Init Calibration Successful
[15:43:23] [RadarAPI]: ar1.RfInit_mult(15)
[15:43:24] [DeviceId-0] MSS power up done async event received!
[15:43:27] RF Init response from the device timed out!
[15:43:27] RF Init failed
[15:43:27][15:43:27] ***Script completed successfully.***
Nancy Wang：
我确认一下再给您回复。
,
Chris Meng：
你好，
RF init和芯片的天线设计没有关系。
,
Ruijie Zhu：
Hi Chris,
帮忙看下是什么原因会导致这个问题呢？谢谢。
[15:43:27] RF Init response from the device timed out![15:43:27] RF Init failed
,
Chris Meng：
你好，
log里还有其他错误：
[15:43:12] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(14, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)[15:43:15] [DeviceId-1] MSS Boot Error status Async event recieved(0x102262)[15:43:15] [DeviceId-2] MSS Boot Error status Async event recieved(0x10226C)[15:43:15] [DeviceId-3] MSS Boot Error status Async event recieved(0x102262)
请问你们的硬件和MMWCAS-RF-EVM有什么区别？板子上AWR2243的各路电源是否有测量过是否正确？
输入电源的电流是否足够？
,
Ruijie Zhu：
你好，
主要区别如下：
1、由于LP87524PRNFRQ1买不到，每个87524由4个3A的分离DCDC替代，实测电压供电均满足1.0V/1.2V/1.8V要求；
2、车规LMK00804BQWRGTRQ1买不到，替换为工业级的LMK00804BPW；
3、删除了AWR2243的外挂Flash（之前确认过firmware是由HOST端提供）；
4、删除了温度传感器TMP112AQDRLRQ1（之前确认过删除无影响）；
其余跟Demo保持一致。
测试电源为14V/6A，
谢谢。
,
Chris Meng：
Ruijie Zhu 说：实测电压供电均满足1.0V/1.2V/1.8V要求；
电压和纹波都满足要求么？示波器看最大最小值。建议在RF init时候测量一下。
,
Ruijie Zhu：
你好
我把AWR2243的外挂Flash重新焊上，MSS Boot Error status Async event recieved消失了，但是还是提示RF Init failed，
稍后我会测下纹波，请帮忙看下有没有其他原因会导致RF Init failed，谢谢。
GM: ConstructorGM: Thu Mar 24 10:54:29 2022RSTD.Transmit("/Settings")[10:54:29] [10:54:29] ### Running Startup script: "C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Scripts\Startup.lua" ###[10:54:29] RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")[10:54:29] RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")[10:54:29] Scripter ignored: Attempt to UnBuild() again or before Build.[10:54:29] RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\Clients\\\\LabClient.dll")[10:54:29] RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")[10:54:29] RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")[10:54:29] RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")[10:54:29] RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")[10:54:29] RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")[10:54:29] RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\RunTime\\SAL.dll")[10:54:29] RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")[10:54:29] RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")[10:54:29] RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")[10:54:29] RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")[10:54:29] RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")[10:54:29] RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")[10:54:29] RSTD.Transmit("/")[10:54:29] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"[10:54:29] RSTD.Build()[10:54:29] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"[10:54:29] RSTD.Transmit("/")[10:54:29] RSTD.AL_Build()[10:54:29] RSTD.AL_LoadXml()[10:54:29] RSTD.Transmit("/")[10:54:29] RSTD.AL_Init()[10:54:29] RSTD.Clients_Build()[10:54:29] GM: Init[10:54:29] GM: Loaded 'C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Clients\\LabClient.dll'[10:54:29] GM: 1 Guest (s) init[10:54:29] GM: 1 Module(s) init[10:54:29] GM: 2 Tab (s) init[10:54:29] RSTD.Client_LoadXml()[10:54:29] [RadarAPI]: ar1.selectRadarMode(0)[10:54:29] [RadarAPI]: Status: Passed[10:54:29] Matlab Runtime Engine is installed[10:54:30] [RadarAPI]: Starting Matlab Engine..[10:54:34] [RadarAPI]: Matlab Engine Started![10:54:35] [RadarAPI]: ar1.selectCascadeMode(0)[10:54:35] [RadarAPI]: Status: Passed[10:54:35] [RadarAPI]: ar1.LoadSettings('C:\Users\zhuruijie\AppData\Roaming\RSTD\ar1gui.ini')[10:54:35] TESTING = false[10:54:35] RstdNet: Port 2777: Listening..[10:54:35] [10:54:35] ***Script completed successfully.***[10:54:45] [RadarAPI]: ar1.selectRadarMode(1)[10:54:45] [RadarAPI]: ar1.selectCascadeMode(1)[10:54:45] [RadarAPI]: Status: Passed[10:54:45] [RadarAPI]: Status: Passed[10:54:46] [RadarAPI]: ar1.SelectCaptureDevice("TDA2XX")[10:54:46] [RadarAPI]: Status: Passed[10:54:47] [RadarAPI]: TDAStatusCallback Event Registered[10:54:47] [RadarAPI]: registerTDAStatusCallback Status: Passed[10:54:47] [RadarAPI]: ar1.ConnectTDA("192.168.33.180", 5001, 15)[10:54:47] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:54:47] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:54:47] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_VERSION_INFO Async event recieved() with status 0. TDA Version : REL_VISION_SDK_03_07_01_00 Aug 5 2019 15:04:45[10:54:47] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:54:47] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:54:49] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:54:49] [RadarAPI]: ConnectTDACaptureCard Status: Passed[10:54:49] TDA Capture Card Status : CONNECTED![10:54:55] Setting up Studio for Cascade started..[10:54:55] [RadarAPI]: Connection to the TDA is already established![10:54:55] ConnectTDA Successful[10:54:55] selectCascadeMode Successful[10:54:55] Setting up Studio for Cascade ended..[10:54:55] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:54:56] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:54:56] [RadarAPI]: ar1.FullReset(1)[10:54:56] [RadarAPI]: Status: Passed[10:54:56] [RadarAPI]: ar1.SOPControl_mult(1,4)[10:54:56] [RadarAPI]: Status: Passed[10:54:56] Master : SOP Reset Successful[10:54:56] [RadarAPI]: ar1.PowerOn_mult(1, 0, 1000, 0,0)[10:54:57] [DeviceId-0] MSS power up done async event received![10:54:57] [RadarAPI]: Status: Passed[10:54:57] Master : SPI Connection Successful[10:54:57] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(1, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)[10:55:00] Master : FW Download Successful[10:55:00] [RadarAPI]: ar1.SelectChipVersion("AR1243")[10:55:00] [RadarAPI]: Status: Passed[10:55:00] [RadarAPI]: ar1.SelectChipVersion("AR1243")[10:55:00] [RadarAPI]: Status: Passed[10:55:00] [RadarAPI]: ar1.deviceVariantSelection("XWR2243")[10:55:00] [RadarAPI]: Status: Passed[10:55:00] [RadarAPI]: ar1.frequencyBandSelection("77G")[10:55:00] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[10:55:00] [RadarAPI]: Status: Passed[10:55:01] Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[10:55:01] [RadarAPI]: ar1.RfEnable_mult(1)[10:55:01] [DeviceId-0] BSS power up done async event received![10:55:01] [RadarAPI]: Status: Passed[10:55:02] Master : RF Power Up Successful[10:55:02] [RadarAPI]: ar1.ChanNAdcConfig_mult(1, 1, 1, 1, 1, 1, 1, 1, 2, 1, 0, 1)[10:55:03] [RadarAPI]: Status: Passed[10:55:03] Master : Channel & ADC Configuration Successful[10:55:03] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:55:03] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:55:04] [RadarAPI]: ar1.FullReset(2)[10:55:04] [RadarAPI]: Status: Passed[10:55:04] [RadarAPI]: ar1.SOPControl_mult(2,4)[10:55:04] [RadarAPI]: Status: Passed[10:55:04] Device 2 : SOP Reset Successful[10:55:04] [DeviceId-1] MSS power up done async event received![10:55:04] [RadarAPI]: ar1.AddDevice(2)[10:55:04] [RadarAPI]: Status: Passed[10:55:04] Device 2 : SPI Connection Successful[10:55:04] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:55:04] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:55:05] [RadarAPI]: ar1.FullReset(4)[10:55:05] [RadarAPI]: Status: Passed[10:55:05] [RadarAPI]: ar1.SOPControl_mult(4,4)[10:55:05] [RadarAPI]: Status: Passed[10:55:05] Device 3 : SOP Reset Successful[10:55:05] [DeviceId-2] MSS power up done async event received![10:55:05] [RadarAPI]: ar1.AddDevice(4)[10:55:05] [RadarAPI]: Status: Passed[10:55:05] Device 3 : SPI Connection Successful[10:55:05] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:55:05] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [10:55:06] [RadarAPI]: ar1.FullReset(8)[10:55:06] [RadarAPI]: Status: Passed[10:55:06] [RadarAPI]: ar1.SOPControl_mult(8,4)[10:55:06] [RadarAPI]: Status: Passed[10:55:06] Device 4 : SOP Reset Successful[10:55:06] [DeviceId-3] MSS power up done async event received![10:55:06] [RadarAPI]: ar1.AddDevice(8)[10:55:06] [RadarAPI]: Status: Passed[10:55:06] Device 4 : SPI Connection Successful[10:55:06] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(14, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)[10:55:09] Slaves : FW Download Successful[10:55:10] [RadarAPI]: ar1.SelectChipVersion("AR1243")[10:55:10] [RadarAPI]: Status: Passed[10:55:10] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[10:55:10] [RadarAPI]: Status: Passed[10:55:10] Slave1 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[10:55:11] [RadarAPI]: ar1.SelectChipVersion("AR1243")[10:55:11] [RadarAPI]: Status: Passed[10:55:11] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[10:55:11] [RadarAPI]: Status: Passed[10:55:11] Slave2 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[10:55:12] [RadarAPI]: ar1.SelectChipVersion("AR1243")[10:55:12] [RadarAPI]: Status: Passed[10:55:12] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[10:55:12] [RadarAPI]: Status: Passed[10:55:12] Slave3 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[10:55:12] [RadarAPI]: ar1.RfEnable_mult(14)[10:55:12] [DeviceId-1] BSS power up done async event received![10:55:12] [DeviceId-2] BSS power up done async event received![10:55:12] [DeviceId-3] BSS power up done async event received![10:55:12] [RadarAPI]: Status: Passed[10:55:17] Slaves : RF Power Up Successful[10:55:17] [RadarAPI]: ar1.ChanNAdcConfig_mult(14, 1, 1, 1, 1, 1, 1, 1, 2, 1, 0, 2)[10:55:17] [RadarAPI]: Status: Passed[10:55:17] Slaves : Channel & ADC Configuration Successful[10:55:17] [RadarAPI]: ar1.RfLdoBypassConfig_mult(15, 0xF)[10:55:17] [RadarAPI]: Status: Passed[10:55:17] LDO Bypass Successful[10:55:17] [RadarAPI]: ar1.LPModConfig_mult(15, 0,0)[10:55:17] [RadarAPI]: Status: Passed[10:55:17] Low Power Mode Configuration Successful[10:55:17] [RadarAPI]: ar1.SetMiscConfig_mult(15, 1, 0, 0, 0)[10:55:17] [RadarAPI]: Status: Passed[10:55:17] Misc Control Configuration Successful[10:55:17] [RadarAPI]: ar1.RfInitCalibConfig_mult(15, 1, 1, 1, 1, 1, 1, 1, 65537)[10:55:17] [RadarAPI]: Status: Passed[10:55:17] RF Init Calibration Successful[10:55:17] [RadarAPI]: ar1.RfInit_mult(15)[10:55:19] [DeviceId-0] MSS power up done async event received![10:55:22] RF Init response from the device timed out![10:55:22] RF Init failed[10:55:22] [10:55:22] ***Script completed successfully.***
,
Chris Meng：
你好，
外部flash不应该会影响的，是否是你们的板子焊接有不良，你焊接flash后让焊接不良有改善？
SOP在复位后的电压也请确认满足要求。
,
Ruijie Zhu：
你好，
我另外试了一块，也是重新加上2243的外部flash，这个MSS Boot Error status Async event recieved才消失，感觉Demo板上的TDA2是不是还是会访问2243的外部flash或是有其他关于2243外部flash的操作?
目前两块自制的2243的PCBA，重新加上外部flash后，MSS Boot Error status Async event recieved均消失，但是RF Init failed都存在，
两块2243 PCBA的纹波和电压都相近
我通过滚动模式观察1.2V/1.8V/1.0V的供电，从上电开始到运行完MIMO的脚本，电压均无明显波动，
1.2V纹波最大为16.4mV
1.0V纹波最大为15.6mV
1.8V纹波最大为17.2mV
是否还有其他方向可供排查？
谢谢。
,
Chris Meng：
Chris Meng 说：SOP在复位后的电压也请确认满足要求。
你测试的结果是？
你能否测量一下下面checklist里bringup提到的几个电压值，看是否正常？
AWR2243 Checklist for Schematic Review, Layout Review, Bringup/Wakeup (https://www.ti.com/lit/zip/sprr419)
,
Ruijie Zhu：
你好，
我测的电压结果如下：
1V0 1.02V;
1V2 1.21V;
1V8 1.82V;
3V3 3.31V;
VBAP 0.89V;
14APLL 1.39V;
14SYNTH 1.43V;
VOUT_PA 1.04V;
CLKP AWR2243-1(晶振提供) 3KHz，AWR2243-2/3/4 120Hz;
另外CLKP，我测的TI的RF demo板上如下：
AWR2243-1(晶振提供) 5KHz左右;
AWR2243-2/3/4 770Hz左右；
感觉跟你们的Demo，主要是晶振上的差异，
这几个问题帮忙确认下：
1、TI RF Demo上测的CLKP的值正常吗？
2、我选用的也是40M的晶振，跟TI RF Demo上的晶振参数相近，实测结果差异有没有可能因为晶振的型号差异导致；
3、CLKP异常能否完成RF Init之前的操作；
4、CLKP异常是否会导致RF Init failed；
谢谢。
,
Chris Meng：
你好，
芯片的时钟晶体起振后测量是40Mhz，你是不是测量的示波器有问题？
,
Chris Meng：
你好，
如果你确认示波器测量没有问题，能否再找找其他的40Mhz晶体尝试一下？
,
Ruijie Zhu：
你好，
我换了设备测试后是40MHz了，CLKP AWR2243-1(晶振提供) 40MHz，AWR2243-2/3/4 40MHz,
抱歉因我的测量误差误导你，
目前测量来看，电压和40M时钟都是正常的，还请帮忙看下还有哪些原因会导致RF Init failed？
1V0 1.02V;
1V2 1.21V;
1V8 1.82V;
3V3 3.31V;
VBAP 0.89V;
14APLL 1.39V;
14SYNTH 1.43V;
VOUT_PA 1.04V;
谢谢。
,
Chris Meng：
Ruijie Zhu 说：
14APLL 1.39V;
14SYNTH 1.43V;
VOUT_14SYNTH 要在rfinit才会变成~1.4V，所以感觉rfinit已经成功。会否是SPI上信号质量不好？你有测量过SPI相关信号么？
Ruijie Zhu 说：[10:55:22] RF Init response from the device timed out!
,
Chris Meng：
Ruijie Zhu 说：测试电源为14V/6A
这个电流保证么？
,
Ruijie Zhu：
你好
14V/6A的测试电源可以保证，同样的setup用TI的原装RF demo板试过多次，均能正常运行脚本。
关于SPI信号，MOSI/CLK/CS上均有振铃，但是测试TI的Demo板上也同样有振铃，两个板子的CLK的测试图片如下
,
Chris Meng：
Ruijie Zhu 说：
14APLL 1.39V;
14SYNTH 1.43V;
这个两个电压是在LUA运行后测量得到的吧？
,
Ruijie Zhu：
是的，运行MIMO脚本
,
Chris Meng：
你好，
收到。我在英文论坛继续询问你的问题了，请关注：
https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1086985/awr2243-awr2243-cascade
,
Chris Meng：
你好，
你用的配置LUA脚本就是mmwave studio里默认的MIMO的lua，对么？
你能否修改一下RFinit的配置，先对master做RFinit，看是否能成功。默认的配置是4个芯片一起做，现在的错误提示我们并不知道是那个device的RF init有问题。如果master rfinit能成功，请在尝试分别对其他的slave做RFinit。
,
Ruijie Zhu：
打扰下，脚本是要改成这样吗，我是做硬件的，不太确定这样改对不对
— RF Initif (0 == ar1.RfInit_mult(deviceMapOverall，1，0，0，0)) then
,
Chris Meng：
你好，
能否尝试下面的配置？
— RF Initif (0 == ar1.RfInit_mult(1)) then WriteToLog("RF Init Master Successful\n", "green")else WriteToLog("RF Init Master failed\n", "red") return -2end
if (0 == ar1.RfInit_mult(2)) thenWriteToLog("RF Init slave1 Successful\n", "green")elseWriteToLog("RF Init slave1 failed\n", "red")return -2end
if (0 == ar1.RfInit_mult(4)) thenWriteToLog("RF Init slave2 Successful\n", "green")elseWriteToLog("RF Init slave2 failed\n", "red")return -2end
if (0 == ar1.RfInit_mult(8)) thenWriteToLog("RF Init slave3 Successful\n", "green")elseWriteToLog("RF Init slave3 failed\n", "red")return -2end
确认是哪个芯片返回值不为0后，可以参考下面的API信息，读取返回值的具体信息。
,
Ruijie Zhu：
你好
运行完更新后的脚本提示Master初始化fail了
GM: ConstructorGM: Thu Mar 31 13:28:25 2022RSTD.Transmit("/Settings")[13:28:25] [13:28:25] ### Running Startup script: "C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Scripts\Startup.lua" ###[13:28:25] RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")[13:28:25] RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")[13:28:25] Scripter ignored: Attempt to UnBuild() again or before Build.[13:28:25] RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\Clients\\\\LabClient.dll")[13:28:25] RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")[13:28:25] RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")[13:28:25] RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")[13:28:25] RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")[13:28:25] RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")[13:28:25] RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_03_00_00_14\\mmWaveStudio\\RunTime\\SAL.dll")[13:28:25] RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")[13:28:25] RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")[13:28:25] RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")[13:28:25] RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")[13:28:25] RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")[13:28:25] RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")[13:28:25] RSTD.Transmit("/")[13:28:25] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"[13:28:25] RSTD.Build()[13:28:25] RSTD.SaveSettings(): Settings saved to "C:\Users\zhuruijie\AppData\Roaming\RSTD\config.xml"[13:28:25] RSTD.Transmit("/")[13:28:25] RSTD.AL_Build()[13:28:25] RSTD.AL_LoadXml()[13:28:25] RSTD.Transmit("/")[13:28:25] RSTD.AL_Init()[13:28:25] RSTD.Clients_Build()[13:28:25] GM: Init[13:28:25] GM: Loaded 'C:\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Clients\\LabClient.dll'[13:28:25] GM: 1 Guest (s) init[13:28:25] GM: 1 Module(s) init[13:28:25] GM: 2 Tab (s) init[13:28:26] RSTD.Client_LoadXml()[13:28:26] [RadarAPI]: ar1.selectRadarMode(0)[13:28:26] [RadarAPI]: Status: Passed[13:28:26] Matlab Runtime Engine is installed[13:28:26] [RadarAPI]: Starting Matlab Engine..[13:28:29] [RadarAPI]: Matlab Engine Started![13:28:30] [RadarAPI]: ar1.selectCascadeMode(0)[13:28:30] [RadarAPI]: Status: Passed[13:28:30] [RadarAPI]: ar1.LoadSettings('C:\Users\zhuruijie\AppData\Roaming\RSTD\ar1gui.ini')[13:28:31] TESTING = false[13:28:31] RstdNet: Port 2777: Listening..[13:28:31] [13:28:31] ***Script completed successfully.***[13:28:36] [RadarAPI]: ar1.selectRadarMode(0)[13:28:36] [RadarAPI]: Status: Passed[13:28:37] [RadarAPI]: ar1.selectRadarMode(1)[13:28:37] [RadarAPI]: ar1.selectCascadeMode(1)[13:28:37] [RadarAPI]: Status: Passed[13:28:37] [RadarAPI]: Status: Passed[13:28:38] [RadarAPI]: ar1.SelectCaptureDevice("TDA2XX")[13:28:38] [RadarAPI]: Status: Passed[13:28:39] [RadarAPI]: TDAStatusCallback Event Registered[13:28:39] [RadarAPI]: registerTDAStatusCallback Status: Passed[13:28:39] [RadarAPI]: ar1.ConnectTDA("192.168.33.180", 5001, 15)[13:28:44] [RadarAPI]: TDAStatusCallback Event Registered[13:28:44] [RadarAPI]: registerTDAStatusCallback Status: Passed[13:28:44] [RadarAPI]: ar1.ConnectTDA("192.168.33.180", 5001, 15)[13:28:44] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:28:44] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:28:44] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_VERSION_INFO Async event recieved() with status 0. TDA Version : REL_VISION_SDK_03_07_01_00 Aug 5 2019 15:04:45[13:28:44] [RadarAPI]: Device 32 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:28:45] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:28:45] [RadarAPI]: ConnectTDACaptureCard Status: Passed[13:28:45] TDA Capture Card Status : CONNECTED![13:28:49] Setting up Studio for Cascade started..[13:28:49] [RadarAPI]: Connection to the TDA is already established![13:28:49] ConnectTDA Successful[13:28:49] selectCascadeMode Successful[13:28:49] Setting up Studio for Cascade ended..[13:28:49] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:28:49] [RadarAPI]: Device 1 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:28:49] [RadarAPI]: ar1.FullReset(1)[13:28:49] [RadarAPI]: Status: Passed[13:28:50] [RadarAPI]: ar1.SOPControl_mult(1,4)[13:28:50] [RadarAPI]: Status: Passed[13:28:50] Master : SOP Reset Successful[13:28:50] [DeviceId-0] MSS power up done async event received![13:28:50] [RadarAPI]: ar1.PowerOn_mult(1, 0, 1000, 0,0)[13:28:50] [RadarAPI]: Status: Passed[13:28:50] Master : SPI Connection Successful[13:28:50] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(1, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)[13:28:53] Master : FW Download Successful[13:28:54] [RadarAPI]: ar1.SelectChipVersion("AR1243")[13:28:54] [RadarAPI]: Status: Passed[13:28:54] [RadarAPI]: ar1.SelectChipVersion("AR1243")[13:28:54] [RadarAPI]: Status: Passed[13:28:54] [RadarAPI]: ar1.deviceVariantSelection("XWR2243")[13:28:54] [RadarAPI]: Status: Passed[13:28:54] [RadarAPI]: ar1.frequencyBandSelection("77G")[13:28:54] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[13:28:54] [RadarAPI]: Status: Passed[13:28:54] Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[13:28:54] [RadarAPI]: ar1.RfEnable_mult(1)[13:28:54] [DeviceId-0] BSS power up done async event received![13:28:54] [RadarAPI]: Status: Passed[13:28:55] Master : RF Power Up Successful[13:28:55] [RadarAPI]: ar1.ChanNAdcConfig_mult(1, 1, 1, 1, 1, 1, 1, 1, 2, 1, 0, 1)[13:28:56] [RadarAPI]: Status: Passed[13:28:56] Master : Channel & ADC Configuration Successful[13:28:56] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:28:56] [RadarAPI]: Device 2 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:28:57] [RadarAPI]: ar1.FullReset(2)[13:28:57] [RadarAPI]: Status: Passed[13:28:57] [RadarAPI]: ar1.SOPControl_mult(2,4)[13:28:57] [RadarAPI]: Status: Passed[13:28:57] Device 2 : SOP Reset Successful[13:28:57] [DeviceId-1] MSS power up done async event received![13:28:57] [RadarAPI]: ar1.AddDevice(2)[13:28:57] [RadarAPI]: Status: Passed[13:28:57] Device 2 : SPI Connection Successful[13:28:57] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:28:57] [RadarAPI]: Device 4 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:28:58] [RadarAPI]: ar1.FullReset(4)[13:28:58] [RadarAPI]: Status: Passed[13:28:58] [RadarAPI]: ar1.SOPControl_mult(4,4)[13:28:58] [RadarAPI]: Status: Passed[13:28:58] Device 3 : SOP Reset Successful[13:28:58] [DeviceId-2] MSS power up done async event received![13:28:58] [RadarAPI]: ar1.AddDevice(4)[13:28:58] [RadarAPI]: Status: Passed[13:28:58] Device 3 : SPI Connection Successful[13:28:58] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:28:58] [RadarAPI]: Device 8 : CAPTURE_RESPONSE_ACK Async event recieved() with status 0 [13:28:58] [RadarAPI]: ar1.FullReset(8)[13:28:58] [RadarAPI]: Status: Passed[13:28:58] [RadarAPI]: ar1.SOPControl_mult(8,4)[13:28:58] [RadarAPI]: Status: Passed[13:28:58] Device 4 : SOP Reset Successful[13:28:59] [DeviceId-3] MSS power up done async event received![13:28:59] [RadarAPI]: ar1.AddDevice(8)[13:28:59] [RadarAPI]: Status: Passed[13:28:59] Device 4 : SPI Connection Successful[13:28:59] [RadarAPI]: ar1.DownloadBssFwOvSPI_mult(14, C:\\ti\\mmwave_dfp_02_02_03_01\\firmware\\xwr22xx_metaImage.bin)[13:29:00] Not able to connect with the TDA board. Please check whether the Capture Card is connected to the network![13:29:02] Slaves : FW Download Successful[13:29:03] [RadarAPI]: ar1.SelectChipVersion("AR1243")[13:29:03] [RadarAPI]: Status: Passed[13:29:03] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[13:29:03] [RadarAPI]: Status: Passed[13:29:03] Slave1 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[13:29:03] [RadarAPI]: ar1.SelectChipVersion("AR1243")[13:29:03] [RadarAPI]: Status: Passed[13:29:03] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[13:29:04] [RadarAPI]: Status: Passed[13:29:04] Slave2 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[13:29:05] [RadarAPI]: ar1.SelectChipVersion("AR1243")[13:29:05] [RadarAPI]: Status: Passed[13:29:05] [RadarAPI]: ar1.SelectChipVersion("XWR2243")[13:29:05] [RadarAPI]: Status: Passed[13:29:05] Slave3 Device Status : XWR2243/ASIL-B/SOP:4/ES:1.1[13:29:05] [RadarAPI]: ar1.RfEnable_mult(14)[13:29:05] [DeviceId-2] BSS power up done async event received![13:29:05] [DeviceId-1] BSS power up done async event received![13:29:05] [DeviceId-3] BSS power up done async event received![13:29:05] [RadarAPI]: Status: Passed[13:29:09] Slaves : RF Power Up Successful[13:29:09] [RadarAPI]: ar1.ChanNAdcConfig_mult(14, 1, 1, 1, 1, 1, 1, 1, 2, 1, 0, 2)[13:29:10] [RadarAPI]: Status: Passed[13:29:10] Slaves : Channel & ADC Configuration Successful[13:29:10] [RadarAPI]: ar1.RfLdoBypassConfig_mult(15, 0xF)[13:29:10] [RadarAPI]: Status: Passed[13:29:10] LDO Bypass Successful[13:29:10] [RadarAPI]: ar1.LPModConfig_mult(15, 0,0)[13:29:10] [RadarAPI]: Status: Passed[13:29:10] Low Power Mode Configuration Successful[13:29:10] [RadarAPI]: ar1.SetMiscConfig_mult(15, 1, 0, 0, 0)[13:29:10] [RadarAPI]: Status: Passed[13:29:10] Misc Control Configuration Successful[13:29:10] [RadarAPI]: ar1.RfInitCalibConfig_mult(15, 1, 1, 1, 1, 1, 1, 1, 65537)[13:29:10] [RadarAPI]: Status: Passed[13:29:10] RF Init Calibration Successful[13:29:10] [RadarAPI]: ar1.RfInit_mult(1)[13:29:11] [DeviceId-0] MSS power up done async event received![13:29:14] RF Init response from the device timed out![13:29:14] RF Init Master failed[13:29:14] [13:29:14] ***Script completed successfully.***
,
Chris Meng：
Ruijie Zhu 说：
我测的电压结果如下：
1V0 1.02V;
1V2 1.21V;
1V8 1.82V;
3V3 3.31V;
VBAP 0.89V;
14APLL 1.39V;
14SYNTH 1.43V;
VOUT_PA 1.04V;
这些电压测量都是master AWR2243的，对么？
,
Ruijie Zhu：
是master的
,
Chris Meng：
你好，
能否把master的rfinit代码，替换为下面的代码，让我们来获取一下返回值的信息？
抱歉我手上没有硬件可以测试，如果运行下面代码有错误，请把错误信息提供一下。
CalibStatus, CalibUpdate, Temperature, Timestamp = ar1.RfInit_mult(1)WriteToLog("CalibStatus ="..CalibStatus..", CalibUpdate = "..CalibUpdate..", Temperature="..Temperature..", Timestamp="..Timestamp.." \n", "red")if (0 == CalibStatus) thenWriteToLog("RF Init Master Successful\n", "green")elseWriteToLog("RF Init Master failed\n", "red")return -2end
,
Ruijie Zhu：
我们那套设备给软件同事去调了，后面有时间我让他们试下，有结果即时反馈给你，多谢支持。
