TI中文支持网
TI专业的中文技术问题搜集分享网站

IWR6843ISK-ODS: RS232连不上 ,使用mmwave studio和DCA1000EVM 及MMWAVEICBOOST,之前用过一阵没什么问题,再用就不行了

Part Number:IWR6843ISK-ODSOther Parts Discussed in Thread: UNIFLASH

用了DCA1000EVM 和MMWAVEICBOOST ,中间应该没碰过板子的重要部分和程序,试了好几次都连不上,请指导下怎么才能连上,输出如下

GM: Constructor
GM: Thu Feb 10 08:18:22 2022
RSTD.Transmit("/Settings")
[08:18:22][08:18:22] ### Running Startup script: "D:\Ti\mmwave_studio_02_01_01_00\mmWaveStudio\Scripts\Startup.lua" ###
[08:18:22] RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")
[08:18:22] RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")
[08:18:22] Scripter ignored: Attempt to UnBuild() again or before Build.
[08:18:22] RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "D:\\Ti\\mmwave_studio_02_01_01_00\\mmWaveStudio\\Clients\\\\LabClient.dll")
[08:18:22] RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")
[08:18:22] RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")
[08:18:22] RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")
[08:18:22] RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")
[08:18:22] RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")
[08:18:22] RSTD.SetVar ("/Settings/AL Client/AL Dll" , "D:\\Ti\\mmwave_studio_02_01_01_00\\mmWaveStudio\\RunTime\\SAL.dll")
[08:18:22] RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")
[08:18:22] RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")
[08:18:22] RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")
[08:18:22] RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")
[08:18:22] RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")
[08:18:22] RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")
[08:18:22] RSTD.Transmit("/")
[08:18:22] RSTD.SaveSettings(): Settings saved to "C:\Users\LENOVO\AppData\Roaming\RSTD\config.xml"
[08:18:22] RSTD.Build()
[08:18:22] RSTD.SaveSettings(): Settings saved to "C:\Users\LENOVO\AppData\Roaming\RSTD\config.xml"
[08:18:22] RSTD.Transmit("/")
[08:18:22] RSTD.AL_Build()
[08:18:22] RSTD.AL_LoadXml()
[08:18:22] RSTD.Transmit("/")
[08:18:22] RSTD.AL_Init()
[08:18:22] RSTD.Clients_Build()
[08:18:22] GM: Init
[08:18:22] GM: Loaded 'D:\Ti\mmwave_studio_02_01_01_00\mmWaveStudio\Clients\\LabClient.dll'
[08:18:22] GM: 1 Guest (s) init
[08:18:22] GM: 1 Module(s) init
[08:18:22] GM: 2 Tab (s) init
[08:18:22] RSTD.Client_LoadXml()
[08:18:22] [RadarAPI]: ar1.selectRadarMode(0)
[08:18:22] [RadarAPI]: Status: Passed
[08:18:22] Matlab Runtime Engine is installed
[08:18:22] [RadarAPI]: Starting Matlab Engine..
[08:18:26] [RadarAPI]: Matlab Engine Started!
[08:18:28] [RadarAPI]: ar1.selectCascadeMode(0)
[08:18:28] [RadarAPI]: Status: Passed
[08:18:28] [RadarAPI]: ar1.LoadSettings('C:\Users\LENOVO\AppData\Roaming\RSTD\ar1gui.ini')
[08:18:28] TESTING = false
[08:18:28] RstdNet: Port 2777: Listening..
[08:18:28][08:18:28] ***Script completed successfully.***
[08:23:31] [RadarAPI]: Opening Gpio Control Port()
[08:23:32] [RadarAPI]: Status: Passed
[08:23:32] [RadarAPI]: Opening Board Control Port()
[08:23:32] [RadarAPI]: Status: Passed
[08:23:33] [RadarAPI]: ar1.FullReset()
[08:23:33] [RadarAPI]: Status: Passed
[08:23:34] [RadarAPI]: Closing Board Control Port()
[08:23:34] [RadarAPI]: Status: Passed
[08:23:34] [RadarAPI]: Closing Gpio Control Port()
[08:23:34] [RadarAPI]: Status: Passed
[08:23:34] [RadarAPI]: ar1.SOPControl(2)
[08:23:34] [RadarAPI]: Status: Passed
[08:23:35] [RadarAPI]: ar1.Connect(3,115200,1000)
[08:23:38] [RadarAPI]: Error: Connection failed: Calling_ConnectTarget returned 3
[08:23:38] [RadarAPI]: ar1.Calling_IsConnected()
[08:23:38] [RadarAPI]: ar1.SaveSettings('C:\Users\LENOVO\AppData\Roaming\RSTD\ar1gui.ini')

Shine:

请先看一下能单独使用IWR6843ISK-ODS吗?https://training.ti.com/hardware-setup-iwr6843isk-and-iwr6843isk-ods

,

Xiaonan Zhang:

按视频把雷达单独连上后没出现那两个端口,只多出了其他设备的首位两个,没有端口号后面用uniflash选不了端口。

另外我之前拍照时网线上的两根连错了,但是正确连接时还是同样的错误信息,还是连不上rs232

,

Xiaonan Zhang:

有人遇到类似的问题是怎么解决的?我没搜到同样的问题

,

Shine:

您的意思是单独使用IWR6843ISK-ODS板子,也不能出现两个COM口?请问是按照上面视频里的步骤一步步操作的吗?如果是的话,要考虑板子可能坏了,因为之前是可以用的。

或者再尝试换台电脑,换数据线。

,

Xiaonan Zhang:

我确实是按照视频操作的。会不会是需要安装什么驱动程序?我最近重装了系统,不过在重装系统前RS232也是连不上,不过之前没试过单独连接雷达,都是配合DCA1000EVM 和MMWAVEICBOOST 连得。

,

Shine:

那您换台电脑试试。

赞(0)
未经允许不得转载:TI中文支持网 » IWR6843ISK-ODS: RS232连不上 ,使用mmwave studio和DCA1000EVM 及MMWAVEICBOOST,之前用过一阵没什么问题,再用就不行了
分享到: 更多 (0)

© 2024 TI中文支持网   网站地图 鲁ICP备2022002796号-1