TI中文支持网Part Number:MMWCAS-RF-EVMOther Parts Discussed in Thread: AWR2243
HI, Gurus,
We bought a MMWCAS-RF-EVM, and we want to replace the QSPI Flash with a new one, what should we do next to boot up this RF board?
The QSPI flash is a 16Mbit QSPI flash for AWR2243 firmware updates.
That is U2 on the SCH, and we bought the same part number as the SCH, i.e. MX25V1635FZNQ.
Do you need to flash the MX25 specially, or just solder it on the board and it will boot up when power on the DSP and RF board?
Best,
Tony Liu
Shine：
请看下面的文档，也适用于AWR2243。IWR6x43 Flash Variants Supported by the mmWave Sensor (Rev. C) (ti.com)另外，级联板是通过主板TDA2下载firmware到AWR2243芯片里，所以不需要flash。请看下面帖子。https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/949434/awr2243-what-flash-variants-are-supported-for-the-awr2243
