TI中文支持网
TI专业的中文技术问题咨询交流网站

CC2640R2F在ccs中烧写工程失败求帮助!

利用CCS对CC2640R2F板子在烧写官方给的simplelink_cc2640r2_sdk_3_40_00_10中的rtls_slave的工程时,总是失败,且给的失败原因是:

Cortex_M3_0: Can't Run Target CPU: (Error -2134 @ 0x0) Unable to control device execution state. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 8.2.0.00004)Cortex_M3_0: Error: (Error -1170 @ 0x0) Unable to access the DAP. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 8.2.0.00004)Cortex_M3_0: Unable to determine target status after 20 attempts
Cortex_M3_0: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging
Cortex_M3_0: Failed to write data to temporary buffer in RAM before programming device FLASH memory. addr=0x20000C00, writeLength=4096(0x1000), bufIdx=0 Error: Could not write 0x20000C00: target is not connectedCortex_M3_0: File Loader: Memory write failed: Failed to write data to temporary buffer in RAM before programming device FLASH memory.
Cortex_M3_0: GEL: File: E:\workspace_v9\rtls_slave_cc2640r2lp_app\FlashROM_StackLibrary\rtls_slave_cc2640r2lp_app.out: Load failed.

应该怎么解决,有没有人可以帮忙解决一下

Viki Shi:

用flash programmer是否可以烧录?

Kevin Qiu1:

用的是launchpad还是自制的板子,检查CCS版本和SDK是否匹配
IAR Embedded Workbench: EWARM-8.32.2
TI Code Composer Studio: CCS-9.0.0.00013
TI Code Generation Tools for Arm: 18.12.4.LTS
XDCTools: 3.51.03.28

user6496854:

回复 Kevin Qiu1:

用的是Lauchpad啊,就是官方买的板子啊

user6496854:

回复 Viki Shi:

用flash programmer也可以烧进去使用吗?

user6496854:

回复 Kevin Qiu1:

用的是launchpad,ccs是用的CCS9.1.0.00010_win64

user6496854:

flash programmer可以烧录嘛?
我用的是launchpad,ccs 版本是 CCS-9.0.0.00010

Viki Shi:

回复 user6496854:

flash programmer 2也可以烧录,你可以尝试一下

赞(0)
未经允许不得转载:TI中文支持网 » CC2640R2F在ccs中烧写工程失败求帮助!
分享到: 更多 (0)