CC1350 ADCBUF如何让实现信道的快速切换

adcBuf = ADCBuf_open(Board_ADCBUF0, &adcBufParams);
                    continuousConversion[0].arg = NULL;
                    continuousConversion[0].sampleBuffer = sampleBufferOne;  //LWS note u16 accord with sample counts ADCBUFFERSIZE
                    continuousConversion[0].sampleBufferTwo = sampleBufferTwo;
                    continuousConversion[0].samplesRequestedCount = ADCBUFFERSIZE;
                    continuousConversion[0].adcChannel = Board_ADCBUF0CHANNEL2;

                    if (ADCBuf_convert(adcBuf, &continuousConversion[0], 1) !=

                            ADCBuf_STATUS_SUCCESS) {

                            /* Did not start conversion process correctly. */

                            while(1);

                        }
                    usleep(10000);
     for(;q<ADCBUFFERSIZE;q++)
     {
         microVolt[q]=microVoltBuffer[q];
         sum1+=microVoltBuffer[q];

    }

                    ADCBuf_close(adcBuf);
                    adcBuf = ADCBuf_open(Board_ADCBUF0, &adcBufParams);

                    continuousConversion[1].arg = NULL;
                    continuousConversion[1].sampleBuffer = sampleBufferOne;  //LWS note u16 accord with sample counts ADCBUFFERSIZE
                    continuousConversion[1].sampleBufferTwo = sampleBufferTwo;
                    continuousConversion[1].samplesRequestedCount = ADCBUFFERSIZE;
                    continuousConversion[1].adcChannel = Board_ADCBUF0CHANNEL3;

                    if (ADCBuf_convert(adcBuf, &continuousConversion[1], 1) !=

                            ADCBuf_STATUS_SUCCESS) {

                            /* Did not start conversion process correctly. */

                            while(1);

                        }
                    usleep(10000);
                    for(q=0;q<ADCBUFFERSIZE;q++)
                         {
                             microVolt[q+ADCBUFFERSIZE+2]=microVoltBuffer[q];
                             sum2+=microVoltBuffer[q];

                        }
                       

                    ADCBuf_close(adcBuf);
                    adcBuf = ADCBuf_open(Board_ADCBUF0, &adcBufParams);
                    continuousConversion[2].arg = NULL;
                    continuousConversion[2].sampleBuffer = sampleBufferOne;  //LWS note u16 accord with sample counts ADCBUFFERSIZE
                    continuousConversion[2].sampleBufferTwo = sampleBufferTwo;
                    continuousConversion[2].samplesRequestedCount = ADCBUFFERSIZE;
                    continuousConversion[2].adcChannel = Board_ADCBUF0CHANNEL4;

                    if (ADCBuf_convert(adcBuf, &continuousConversion[2], 1) !=

                            ADCBuf_STATUS_SUCCESS) {

                            /* Did not start conversion process correctly. */

                            while(1);

                        }
                    usleep(10000);
                    for(q=0;q<ADCBUFFERSIZE;q++)
                    {
                        microVolt[q+(ADCBUFFERSIZE+2)*2]=microVoltBuffer[q];
                        sum3+=microVoltBuffer[q];

                   }
       

                    ADCBuf_close(adcBuf);
                    adcBuf = ADCBuf_open(Board_ADCBUF0, &adcBufParams);
                    continuousConversion[3].arg = NULL;
                    continuousConversion[3].sampleBuffer = sampleBufferOne;  //LWS note u16 accord with sample counts ADCBUFFERSIZE
                    continuousConversion[3].sampleBufferTwo = sampleBufferTwo;
                    continuousConversion[3].samplesRequestedCount = ADCBUFFERSIZE;
                    continuousConversion[3].adcChannel = Board_ADCBUF0CHANNEL5;

                    if (ADCBuf_convert(adcBuf, &continuousConversion[3], 1) !=

                            ADCBuf_STATUS_SUCCESS) {

                            /* Did not start conversion process correctly. */

                            while(1);

                        }

                    usleep(10000);
                    for(q=0;q<ADCBUFFERSIZE;q++)
                                      {
                                          microVolt[q+(ADCBUFFERSIZE+2)*3]=microVoltBuffer[q];
                                          sum4+=microVoltBuffer[q];

                                     }