BQ27542g1 开启QEN,再下命令21无法关闭QEN

Star Xu:

您好,QEN set以后不能清除,请参考下面文档的描述。 IT ENABLE: 0x0021
Forces the fuel gauge to begin the Impedance Track algorithm, sets Bit 2 of UpdateStatus and causes
the [VOK] and [QEN] flags to be set in the CONTROL_STATUS register. [VOK] is cleared if the voltages
are not suitable for a Qmax update. Once set, [QEN] cannot be cleared. This command is only available
when the fuel gauge is UNSEALED and is typically enabled at the last step of production after system test
is completed.

未经允许不得转载:TI中文支持网 » BQ27542开启QEN,再下命令21无法关闭QEN
分享到: 更多 (0)