TI中文支持网
错误说明：
CortexR4_0: Can't Run Target CPU: (Error -2043 @ 0x14988) Unable to clear requested breakpoint from memory. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 8.0.27.9)CortexR4_0: Error: (Error -1170 @ 0x0) Unable to access the DAP. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 8.0.27.9)CortexR4_0: Unable to determine target status after 20 attempts
CortexR4_0: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging
编译器配置：
user5022069：
回复 Wesley He:
好的， 已发帖，多谢解答！
