28377D的CLA代码可以写到flash里吗？运行时再从flash加载到ram是这样的吗？

void CLA_configClaMemory(void)
{
extern uint32_t Cla1funcsRunStart, Cla1funcsLoadStart, Cla1funcsLoadSize;
EALLOW;

#ifdef _FLASH
// Copy over code from FLASH to RAM
memcpy((uint32_t *)&Cla1funcsRunStart, (uint32_t *)&Cla1funcsLoadStart,
(uint32_t)&Cla1funcsLoadSize);
#endif //_FLASH

上面的代码是CLA存储配置函数，其中怎样再cmd文件体现这些呢，谁方便提供下这方面的例程吗？

Susan Yang：

您可以看一下 C:\ti\controlSUITE\device_support\F2837xD\v210\F2837xD_examples_Dual\cla_iir2p2z\cpu02

其中的 CLA_configClaMemory

// CLA_configClaMemory - Configure CLA memory
//
void CLA_configClaMemory(void)
{extern uint32_t Cla1funcsRunStart, Cla1funcsLoadStart, Cla1funcsLoadSize;//// Wait for signal from CPU1 before configuring//IpcSync(5);EALLOW;
#ifdef _FLASH//// Copy over code from FLASH to RAM//memcpy((uint32_t *)&Cla1funcsRunStart, (uint32_t *)&Cla1funcsLoadStart,(uint32_t)&Cla1funcsLoadSize);
#endif //_FLASH
#ifdef CPU2//// Enable CPU2 clocking at the sys clock level//CpuSysRegs.PCLKCR0.bit.CLA1 = 1;
#endif //CPU2//// Initialize and wait for CLA1ToCPUMsgRAM//MemCfgRegs.MSGxINIT.bit.INIT_CLA1TOCPU = 1;while(MemCfgRegs.MSGxINITDONE.bit.INITDONE_CLA1TOCPU != 1){};//// Initialize and wait for CPUToCLA1MsgRAM//MemCfgRegs.MSGxINIT.bit.INIT_CPUTOCLA1 = 1;while(MemCfgRegs.MSGxINITDONE.bit.INITDONE_CPUTOCLA1 != 1){};//// Select LS5RAM to be the programming space for the CLA// First configure the CLA to be the master for LS5 and then// set the space to be a program block//MemCfgRegs.LSxMSEL.bit.MSEL_LS5 = 1;MemCfgRegs.LSxCLAPGM.bit.CLAPGM_LS5 = 1;//// Next configure LS0RAM and LS1RAM as data spaces for the CLA// First configure the CLA to be the master for LS0(1) and then// set the spaces to be code blocks//MemCfgRegs.LSxMSEL.bit.MSEL_LS0 = 1;MemCfgRegs.LSxCLAPGM.bit.CLAPGM_LS0 = 0;MemCfgRegs.LSxMSEL.bit.MSEL_LS1 = 1;MemCfgRegs.LSxCLAPGM.bit.CLAPGM_LS1 = 0;EDIS;
}

void CLA_configClaMemory(void)
{
extern uint32_t Cla1funcsRunStart, Cla1funcsLoadStart, Cla1funcsLoadSize;
EALLOW;

#ifdef _FLASH
// Copy over code from FLASH to RAM
memcpy((uint32_t *)&Cla1funcsRunStart, (uint32_t *)&Cla1funcsLoadStart,
(uint32_t)&Cla1funcsLoadSize);
#endif //_FLASH

上面的代码是CLA存储配置函数，其中怎样再cmd文件体现这些呢，谁方便提供下这方面的例程吗？

liang wang：

回复 Susan Yang:

这个例子是加载到RAM的有那种cla代码下载到flash里的例子吗