TI中文支持网The TPS563201 is designed with advanced Eco-mode to maintain high light load efficiency. As the output current decreases from heavy load condition, the inductor current is also reduced and eventually comes to point that its rippled valley touches zero level, which is the boundary between continuous conduction and discontinuous conduction modes. The rectifying MOSFET is turned off when the zero inductor current is detected. As the load current further decreases the converter runs into discontinuous conduction mode. The on-time is kept almost the same as it was in the continuous conduction mode so that it takes longer time to discharge the output capacitor with smaller load current to the level of the reference voltage. This makes the switching frequency lower, proportional to the load current, and keeps the light load efficiency high. The transition point to the light load operation I OUT(LL)
current can be calculated in Equation 1.
Iout=[1/（2*L*Fsw）]*[(Vin-Vout)*Vout/Vin]
问题：为什么会出现1/2呢？是为了留有裕量还是什么？
Marvellous Liu：
回复 Johnsin Tao:
谢谢
Johnsin Tao：
回复 Marvellous Liu:
Hi不客气
