请帮忙推荐一下,顺便问下,LM5088,可以用来做负电压输出吗,怎么改呢,最大能输出多大电流,可以用在负24V输出吗?
Seasat Liu:
LM5117 可以完成
Seasat Liu:
回复 Seasat Liu:
看一下这个链接,完整的原理图,PCB和BOM
www.ti.com/…/PMP20904
The PMP20904 reference design is a negative buck utilizing the LM5117 controller for industrial applications. This design can operate at 24Vin at +/-10%. The design has an output of -24V and capable of sourcing 2A continuous current and up to 4A transient. Switching frequency is set to 200kHz, and a 4 layer PCB is used.
Johnsin Tao:
回复 Seasat Liu:
Hi 输入电压范围超过48V, 输出电流能力超过10A的降压芯片,如上面的LM5117之类的降压芯片都可以用来做负压输出的芯片。在原有buck拓扑的基础上将输出接到GND,那么此时的GND就变化成为负压,架构也就变化成为buck-boost.设计方式如下:www.ti.com.cn/…/slva317b.pdf(TPS54160并不适合,因为电流太小,这里只是提供给你用于做负压的思路,寻找其他输入电压范围超过48V, 输出电流能力超过10A的降压芯片。)
Frank Xiao:
回复 Johnsin Tao:
你好,
可以选用LM5145来实现,把GND和输出电压换一下,谢谢。