请教，刚买的EZDSP5515板子，按照步骤烧写程序到FLASH后，下次debug就连不上板子了，这是为什么呢？着急，谢谢

请教，刚买的EZDSP5515板子，按照步骤烧写程序到FLASH后，下次debug就连不上板子了，这是为什么呢？着急，谢谢、

C55xx: Error connecting to the target: (Error -1143 @ 0x5F) Device core was hung. The debugger has forced the device to a ready state and recovered debug control, but your application's state is now corrupt. You should have limited access to memory and registers, but you may need to reset the device to debug further. (Emulation package 5.1.73.0)

Tony Tang：

可能是因为你烧的程序有问题，跑飞了。建议你用镊子将flash的CS短到3.3V，再上电，让芯片跳过boot的过程。再连上仿真器，将flash擦掉。